zhengxuelong/mechanics/R1.0/磁吸充电带灯.stp

ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('00000_ASM_ASM','2021-12-07T',('Administrator'),(''),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010480',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2010480','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#2=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#3=DIRECTION('',(0.E0,0.E0,-1.E0));
#4=DIRECTION('',(1.E0,0.E0,0.E0));
#5=AXIS2_PLACEMENT_3D('',#2,#3,#4);
#7=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#8=DIRECTION('',(0.E0,0.E0,-1.E0));
#9=DIRECTION('',(-1.E0,0.E0,0.E0));
#10=AXIS2_PLACEMENT_3D('',#7,#8,#9);
#12=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#13=DIRECTION('',(0.E0,0.E0,1.E0));
#14=DIRECTION('',(1.E0,0.E0,0.E0));
#15=AXIS2_PLACEMENT_3D('',#12,#13,#14);
#17=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#18=DIRECTION('',(0.E0,0.E0,1.E0));
#19=DIRECTION('',(-1.E0,0.E0,0.E0));
#20=AXIS2_PLACEMENT_3D('',#17,#18,#19);
#22=CARTESIAN_POINT('',(-4.35E0,0.E0,-1.485E1));
#23=DIRECTION('',(0.E0,1.E0,0.E0));
#24=DIRECTION('',(-7.071067811799E-1,0.E0,7.071067811932E-1));
#25=AXIS2_PLACEMENT_3D('',#22,#23,#24);
#27=CARTESIAN_POINT('',(4.35E0,0.E0,-1.485E1));
#28=DIRECTION('',(0.E0,-1.E0,0.E0));
#29=DIRECTION('',(7.071067811799E-1,0.E0,7.071067811932E-1));
#30=AXIS2_PLACEMENT_3D('',#27,#28,#29);
#32=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#33=DIRECTION('',(0.E0,0.E0,-1.E0));
#34=DIRECTION('',(-1.E0,0.E0,0.E0));
#35=AXIS2_PLACEMENT_3D('',#32,#33,#34);
#37=CARTESIAN_POINT('',(4.35E0,0.E0,-1.485E1));
#38=DIRECTION('',(0.E0,-1.E0,0.E0));
#39=DIRECTION('',(1.E0,0.E0,0.E0));
#40=AXIS2_PLACEMENT_3D('',#37,#38,#39);
#42=CARTESIAN_POINT('',(0.E0,0.E0,-1.474393398282E1));
#43=DIRECTION('',(0.E0,0.E0,1.E0));
#44=DIRECTION('',(1.E0,0.E0,0.E0));
#45=AXIS2_PLACEMENT_3D('',#42,#43,#44);
#47=DIRECTION('',(0.E0,0.E0,-1.E0));
#48=VECTOR('',#47,1.45E0);
#49=CARTESIAN_POINT('',(-4.5E0,0.E0,-1.485E1));
#50=LINE('',#49,#48);
#51=DIRECTION('',(0.E0,0.E0,-1.E0));
#52=VECTOR('',#51,1.45E0);
#53=CARTESIAN_POINT('',(4.5E0,0.E0,-1.485E1));
#54=LINE('',#53,#52);
#55=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#56=DIRECTION('',(0.E0,0.E0,-1.E0));
#57=DIRECTION('',(1.E0,0.E0,0.E0));
#58=AXIS2_PLACEMENT_3D('',#55,#56,#57);
#60=CARTESIAN_POINT('',(-4.35E0,0.E0,-1.485E1));
#61=DIRECTION('',(0.E0,1.E0,0.E0));
#62=DIRECTION('',(-1.E0,0.E0,0.E0));
#63=AXIS2_PLACEMENT_3D('',#60,#61,#62);
#65=CARTESIAN_POINT('',(0.E0,0.E0,-1.474393398282E1));
#66=DIRECTION('',(0.E0,0.E0,1.E0));
#67=DIRECTION('',(-1.E0,0.E0,0.E0));
#68=AXIS2_PLACEMENT_3D('',#65,#66,#67);
#70=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#71=DIRECTION('',(0.E0,0.E0,1.E0));
#72=DIRECTION('',(-1.E0,0.E0,0.E0));
#73=AXIS2_PLACEMENT_3D('',#70,#71,#72);
#75=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#76=DIRECTION('',(0.E0,0.E0,1.E0));
#77=DIRECTION('',(1.E0,0.E0,0.E0));
#78=AXIS2_PLACEMENT_3D('',#75,#76,#77);
#80=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#81=DIRECTION('',(0.E0,0.E0,-1.E0));
#82=DIRECTION('',(-1.E0,0.E0,0.E0));
#83=AXIS2_PLACEMENT_3D('',#80,#81,#82);
#85=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#86=DIRECTION('',(0.E0,0.E0,-1.E0));
#87=DIRECTION('',(1.E0,0.E0,0.E0));
#88=AXIS2_PLACEMENT_3D('',#85,#86,#87);
#90=DIRECTION('',(0.E0,0.E0,-1.E0));
#91=VECTOR('',#90,1.6E0);
#92=CARTESIAN_POINT('',(2.85E0,0.E0,-1.47E1));
#93=LINE('',#92,#91);
#94=DIRECTION('',(0.E0,0.E0,-1.E0));
#95=VECTOR('',#94,1.6E0);
#96=CARTESIAN_POINT('',(-2.85E0,0.E0,-1.47E1));
#97=LINE('',#96,#95);
#98=CARTESIAN_POINT('',(4.35E0,0.E0,-1.47E1));
#99=CARTESIAN_POINT('',(-4.35E0,0.E0,-1.47E1));
#100=VERTEX_POINT('',#98);
#101=VERTEX_POINT('',#99);
#102=CARTESIAN_POINT('',(2.85E0,0.E0,-1.47E1));
#103=CARTESIAN_POINT('',(-2.85E0,0.E0,-1.47E1));
#104=VERTEX_POINT('',#102);
#105=VERTEX_POINT('',#103);
#106=CARTESIAN_POINT('',(4.456066017177E0,0.E0,-1.474393398282E1));
#107=VERTEX_POINT('',#106);
#108=CARTESIAN_POINT('',(-4.456066017177E0,0.E0,-1.474393398282E1));
#109=VERTEX_POINT('',#108);
#110=CARTESIAN_POINT('',(-4.5E0,0.E0,-1.485E1));
#111=CARTESIAN_POINT('',(4.5E0,0.E0,-1.485E1));
#112=VERTEX_POINT('',#110);
#113=VERTEX_POINT('',#111);
#114=CARTESIAN_POINT('',(-4.5E0,0.E0,-1.63E1));
#115=VERTEX_POINT('',#114);
#116=CARTESIAN_POINT('',(4.5E0,0.E0,-1.63E1));
#117=VERTEX_POINT('',#116);
#118=CARTESIAN_POINT('',(-2.85E0,0.E0,-1.63E1));
#119=CARTESIAN_POINT('',(2.85E0,0.E0,-1.63E1));
#120=VERTEX_POINT('',#118);
#121=VERTEX_POINT('',#119);
#122=CARTESIAN_POINT('',(5.07E0,4.225E0,-1.47E1));
#123=DIRECTION('',(0.E0,0.E0,-1.E0));
#124=DIRECTION('',(-1.E0,0.E0,0.E0));
#125=AXIS2_PLACEMENT_3D('',#122,#123,#124);
#126=PLANE('',#125);
#128=ORIENTED_EDGE('',*,*,#127,.T.);
#130=ORIENTED_EDGE('',*,*,#129,.T.);
#131=EDGE_LOOP('',(#128,#130));
#132=FACE_OUTER_BOUND('',#131,.F.);
#134=ORIENTED_EDGE('',*,*,#133,.T.);
#136=ORIENTED_EDGE('',*,*,#135,.T.);
#137=EDGE_LOOP('',(#134,#136));
#138=FACE_BOUND('',#137,.F.);
#140=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#141=DIRECTION('',(0.E0,0.E0,-1.E0));
#142=DIRECTION('',(-1.E0,0.E0,0.E0));
#143=AXIS2_PLACEMENT_3D('',#140,#141,#142);
#144=TOROIDAL_SURFACE('',#143,4.35E0,1.5E-1);
#145=ORIENTED_EDGE('',*,*,#127,.F.);
#147=ORIENTED_EDGE('',*,*,#146,.F.);
#149=ORIENTED_EDGE('',*,*,#148,.F.);
#151=ORIENTED_EDGE('',*,*,#150,.T.);
#152=EDGE_LOOP('',(#145,#147,#149,#151));
#153=FACE_OUTER_BOUND('',#152,.F.);
#155=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#156=DIRECTION('',(0.E0,0.E0,-1.E0));
#157=DIRECTION('',(-1.E0,0.E0,0.E0));
#158=AXIS2_PLACEMENT_3D('',#155,#156,#157);
#159=TOROIDAL_SURFACE('',#158,4.35E0,1.5E-1);
#160=ORIENTED_EDGE('',*,*,#129,.F.);
#161=ORIENTED_EDGE('',*,*,#150,.F.);
#163=ORIENTED_EDGE('',*,*,#162,.F.);
#164=ORIENTED_EDGE('',*,*,#146,.T.);
#165=EDGE_LOOP('',(#160,#161,#163,#164));
#166=FACE_OUTER_BOUND('',#165,.F.);
#168=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#169=DIRECTION('',(0.E0,0.E0,-1.E0));
#170=DIRECTION('',(-1.E0,0.E0,0.E0));
#171=AXIS2_PLACEMENT_3D('',#168,#169,#170);
#172=TOROIDAL_SURFACE('',#171,4.35E0,1.5E-1);
#174=ORIENTED_EDGE('',*,*,#173,.T.);
#176=ORIENTED_EDGE('',*,*,#175,.T.);
#177=ORIENTED_EDGE('',*,*,#162,.T.);
#179=ORIENTED_EDGE('',*,*,#178,.F.);
#180=EDGE_LOOP('',(#174,#176,#177,#179));
#181=FACE_OUTER_BOUND('',#180,.F.);
#183=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#184=DIRECTION('',(0.E0,0.E0,1.E0));
#185=DIRECTION('',(1.E0,0.E0,0.E0));
#186=AXIS2_PLACEMENT_3D('',#183,#184,#185);
#187=CYLINDRICAL_SURFACE('',#186,4.5E0);
#188=ORIENTED_EDGE('',*,*,#173,.F.);
#190=ORIENTED_EDGE('',*,*,#189,.T.);
#192=ORIENTED_EDGE('',*,*,#191,.F.);
#194=ORIENTED_EDGE('',*,*,#193,.F.);
#195=EDGE_LOOP('',(#188,#190,#192,#194));
#196=FACE_OUTER_BOUND('',#195,.F.);
#198=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#199=DIRECTION('',(0.E0,0.E0,1.E0));
#200=DIRECTION('',(1.E0,0.E0,0.E0));
#201=AXIS2_PLACEMENT_3D('',#198,#199,#200);
#202=CYLINDRICAL_SURFACE('',#201,4.5E0);
#204=ORIENTED_EDGE('',*,*,#203,.F.);
#205=ORIENTED_EDGE('',*,*,#193,.T.);
#207=ORIENTED_EDGE('',*,*,#206,.F.);
#208=ORIENTED_EDGE('',*,*,#189,.F.);
#209=EDGE_LOOP('',(#204,#205,#207,#208));
#210=FACE_OUTER_BOUND('',#209,.F.);
#212=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#213=DIRECTION('',(0.E0,0.E0,-1.E0));
#214=DIRECTION('',(-1.E0,0.E0,0.E0));
#215=AXIS2_PLACEMENT_3D('',#212,#213,#214);
#216=TOROIDAL_SURFACE('',#215,4.35E0,1.5E-1);
#217=ORIENTED_EDGE('',*,*,#203,.T.);
#218=ORIENTED_EDGE('',*,*,#178,.T.);
#219=ORIENTED_EDGE('',*,*,#148,.T.);
#220=ORIENTED_EDGE('',*,*,#175,.F.);
#221=EDGE_LOOP('',(#217,#218,#219,#220));
#222=FACE_OUTER_BOUND('',#221,.F.);
#224=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#225=DIRECTION('',(0.E0,0.E0,1.E0));
#226=DIRECTION('',(1.E0,0.E0,0.E0));
#227=AXIS2_PLACEMENT_3D('',#224,#225,#226);
#228=PLANE('',#227);
#229=ORIENTED_EDGE('',*,*,#206,.T.);
#230=ORIENTED_EDGE('',*,*,#191,.T.);
#231=EDGE_LOOP('',(#229,#230));
#232=FACE_OUTER_BOUND('',#231,.F.);
#234=ORIENTED_EDGE('',*,*,#233,.T.);
#236=ORIENTED_EDGE('',*,*,#235,.T.);
#237=EDGE_LOOP('',(#234,#236));
#238=FACE_BOUND('',#237,.F.);
#240=CARTESIAN_POINT('',(0.E0,0.E0,-1.575E1));
#241=DIRECTION('',(0.E0,0.E0,1.E0));
#242=DIRECTION('',(1.E0,0.E0,0.E0));
#243=AXIS2_PLACEMENT_3D('',#240,#241,#242);
#244=CYLINDRICAL_SURFACE('',#243,2.85E0);
#245=ORIENTED_EDGE('',*,*,#133,.F.);
#247=ORIENTED_EDGE('',*,*,#246,.T.);
#248=ORIENTED_EDGE('',*,*,#233,.F.);
#250=ORIENTED_EDGE('',*,*,#249,.F.);
#251=EDGE_LOOP('',(#245,#247,#248,#250));
#252=FACE_OUTER_BOUND('',#251,.F.);
#254=CARTESIAN_POINT('',(0.E0,0.E0,-1.575E1));
#255=DIRECTION('',(0.E0,0.E0,1.E0));
#256=DIRECTION('',(1.E0,0.E0,0.E0));
#257=AXIS2_PLACEMENT_3D('',#254,#255,#256);
#258=CYLINDRICAL_SURFACE('',#257,2.85E0);
#259=ORIENTED_EDGE('',*,*,#135,.F.);
#260=ORIENTED_EDGE('',*,*,#249,.T.);
#261=ORIENTED_EDGE('',*,*,#235,.F.);
#262=ORIENTED_EDGE('',*,*,#246,.F.);
#263=EDGE_LOOP('',(#259,#260,#261,#262));
#264=FACE_OUTER_BOUND('',#263,.F.);
#266=CLOSED_SHELL('',(#139,#154,#167,#182,#197,#211,#223,#239,#253,#265));
#267=MANIFOLD_SOLID_BREP('',#266);
#269=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#271=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#270);
#272=(CONVERSION_BASED_UNIT('DEGREE',#271)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#274=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.283189487965E-3),#268,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#276=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#277=DIRECTION('',(0.E0,0.E0,1.E0));
#278=DIRECTION('',(1.E0,0.E0,0.E0));
#281=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#282=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#281);
#283=DESIGN_CONTEXT('',#281,'design');
#284=MECHANICAL_CONTEXT('',#281,'mechanical');
#285=PRODUCT('MANIFOLD_SOLID_BREP_159','MANIFOLD_SOLID_BREP_159',
'NOT SPECIFIED',(#284));
#286=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#285,
.MADE.);
#295=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#296=DIRECTION('',(0.E0,0.E0,1.E0));
#297=DIRECTION('',(1.E0,0.E0,0.E0));
#298=AXIS2_PLACEMENT_3D('',#295,#296,#297);
#299=ITEM_DEFINED_TRANSFORMATION('','',#279,#298);
#300=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#301=DIRECTION('',(0.E0,0.E0,1.E0));
#302=DIRECTION('',(1.E0,0.E0,0.E0));
#304=(REPRESENTATION_RELATIONSHIP('','',#280,#292)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#299)SHAPE_REPRESENTATION_RELATIONSHIP());
#305=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#304,#294);
#307=CARTESIAN_POINT('',(0.E0,0.E0,-1.435E1));
#308=DIRECTION('',(0.E0,0.E0,-1.E0));
#309=DIRECTION('',(1.E0,0.E0,0.E0));
#310=AXIS2_PLACEMENT_3D('',#307,#308,#309);
#312=CARTESIAN_POINT('',(0.E0,0.E0,-1.435E1));
#313=DIRECTION('',(0.E0,0.E0,-1.E0));
#314=DIRECTION('',(-1.E0,0.E0,0.E0));
#315=AXIS2_PLACEMENT_3D('',#312,#313,#314);
#317=CARTESIAN_POINT('',(0.E0,0.E0,-1.435E1));
#318=DIRECTION('',(0.E0,0.E0,1.E0));
#319=DIRECTION('',(0.E0,-1.E0,0.E0));
#320=AXIS2_PLACEMENT_3D('',#317,#318,#319);
#322=CARTESIAN_POINT('',(0.E0,0.E0,-1.435E1));
#323=DIRECTION('',(0.E0,0.E0,1.E0));
#324=DIRECTION('',(1.E0,0.E0,0.E0));
#325=AXIS2_PLACEMENT_3D('',#322,#323,#324);
#327=CARTESIAN_POINT('',(0.E0,0.E0,-1.435E1));
#328=DIRECTION('',(0.E0,0.E0,1.E0));
#329=DIRECTION('',(0.E0,1.E0,0.E0));
#330=AXIS2_PLACEMENT_3D('',#327,#328,#329);
#332=CARTESIAN_POINT('',(0.E0,0.E0,-1.435E1));
#333=DIRECTION('',(0.E0,0.E0,1.E0));
#334=DIRECTION('',(-1.E0,0.E0,0.E0));
#335=AXIS2_PLACEMENT_3D('',#332,#333,#334);
#337=CARTESIAN_POINT('',(-2.725E0,0.E0,-1.455E1));
#338=DIRECTION('',(0.E0,1.E0,0.E0));
#339=DIRECTION('',(-7.071067811790E-1,0.E0,7.071067811941E-1));
#340=AXIS2_PLACEMENT_3D('',#337,#338,#339);
#342=CARTESIAN_POINT('',(2.725E0,0.E0,-1.455E1));
#343=DIRECTION('',(0.E0,-1.E0,0.E0));
#344=DIRECTION('',(7.071067811790E-1,0.E0,7.071067811941E-1));
#345=AXIS2_PLACEMENT_3D('',#342,#343,#344);
#347=CARTESIAN_POINT('',(0.E0,0.E0,-1.455E1));
#348=DIRECTION('',(0.E0,0.E0,-1.E0));
#349=DIRECTION('',(-1.E0,0.E0,0.E0));
#350=AXIS2_PLACEMENT_3D('',#347,#348,#349);
#352=CARTESIAN_POINT('',(2.725E0,0.E0,-1.455E1));
#353=DIRECTION('',(0.E0,-1.E0,0.E0));
#354=DIRECTION('',(1.E0,0.E0,0.E0));
#355=AXIS2_PLACEMENT_3D('',#352,#353,#354);
#357=CARTESIAN_POINT('',(0.E0,0.E0,-1.440857864376E1));
#358=DIRECTION('',(0.E0,0.E0,1.E0));
#359=DIRECTION('',(1.E0,0.E0,0.E0));
#360=AXIS2_PLACEMENT_3D('',#357,#358,#359);
#362=DIRECTION('',(0.E0,0.E0,-1.E0));
#363=VECTOR('',#362,2.3E0);
#364=CARTESIAN_POINT('',(-2.925E0,0.E0,-1.455E1));
#365=LINE('',#364,#363);
#366=DIRECTION('',(0.E0,0.E0,-1.E0));
#367=VECTOR('',#366,2.3E0);
#368=CARTESIAN_POINT('',(2.925E0,0.E0,-1.455E1));
#369=LINE('',#368,#367);
#370=CARTESIAN_POINT('',(0.E0,0.E0,-1.455E1));
#371=DIRECTION('',(0.E0,0.E0,-1.E0));
#372=DIRECTION('',(1.E0,0.E0,0.E0));
#373=AXIS2_PLACEMENT_3D('',#370,#371,#372);
#375=CARTESIAN_POINT('',(-2.725E0,0.E0,-1.455E1));
#376=DIRECTION('',(0.E0,1.E0,0.E0));
#377=DIRECTION('',(-1.E0,0.E0,0.E0));
#378=AXIS2_PLACEMENT_3D('',#375,#376,#377);
#380=CARTESIAN_POINT('',(0.E0,0.E0,-1.440857864376E1));
#381=DIRECTION('',(0.E0,0.E0,1.E0));
#382=DIRECTION('',(-1.E0,0.E0,0.E0));
#383=AXIS2_PLACEMENT_3D('',#380,#381,#382);
#385=CARTESIAN_POINT('',(0.E0,0.E0,-1.685E1));
#386=DIRECTION('',(0.E0,0.E0,1.E0));
#387=DIRECTION('',(1.E0,0.E0,0.E0));
#388=AXIS2_PLACEMENT_3D('',#385,#386,#387);
#390=CARTESIAN_POINT('',(0.E0,0.E0,-1.685E1));
#391=DIRECTION('',(0.E0,0.E0,1.E0));
#392=DIRECTION('',(-1.E0,0.E0,0.E0));
#393=AXIS2_PLACEMENT_3D('',#390,#391,#392);
#395=DIRECTION('',(0.E0,0.E0,-1.E0));
#396=VECTOR('',#395,5.E-1);
#397=CARTESIAN_POINT('',(-2.35E0,0.E0,-1.435E1));
#398=LINE('',#397,#396);
#399=DIRECTION('',(0.E0,0.E0,-1.E0));
#400=VECTOR('',#399,5.E-1);
#401=CARTESIAN_POINT('',(2.35E0,0.E0,-1.435E1));
#402=LINE('',#401,#400);
#403=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#404=DIRECTION('',(0.E0,0.E0,-1.E0));
#405=DIRECTION('',(0.E0,1.E0,0.E0));
#406=AXIS2_PLACEMENT_3D('',#403,#404,#405);
#408=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#409=DIRECTION('',(0.E0,0.E0,-1.E0));
#410=DIRECTION('',(1.E0,0.E0,0.E0));
#411=AXIS2_PLACEMENT_3D('',#408,#409,#410);
#413=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#414=DIRECTION('',(0.E0,0.E0,-1.E0));
#415=DIRECTION('',(0.E0,-1.E0,0.E0));
#416=AXIS2_PLACEMENT_3D('',#413,#414,#415);
#418=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#419=DIRECTION('',(0.E0,0.E0,-1.E0));
#420=DIRECTION('',(-1.E0,0.E0,0.E0));
#421=AXIS2_PLACEMENT_3D('',#418,#419,#420);
#423=CARTESIAN_POINT('',(2.725E0,0.E0,-1.435E1));
#424=CARTESIAN_POINT('',(-2.725E0,0.E0,-1.435E1));
#425=VERTEX_POINT('',#423);
#426=VERTEX_POINT('',#424);
#427=CARTESIAN_POINT('',(0.E0,-2.35E0,-1.435E1));
#428=CARTESIAN_POINT('',(2.35E0,0.E0,-1.435E1));
#429=VERTEX_POINT('',#427);
#430=VERTEX_POINT('',#428);
#431=CARTESIAN_POINT('',(0.E0,2.35E0,-1.435E1));
#432=VERTEX_POINT('',#431);
#433=CARTESIAN_POINT('',(-2.35E0,0.E0,-1.435E1));
#434=VERTEX_POINT('',#433);
#435=CARTESIAN_POINT('',(2.866421356236E0,0.E0,-1.440857864376E1));
#436=VERTEX_POINT('',#435);
#437=CARTESIAN_POINT('',(-2.866421356236E0,0.E0,-1.440857864376E1));
#438=VERTEX_POINT('',#437);
#439=CARTESIAN_POINT('',(-2.925E0,0.E0,-1.455E1));
#440=CARTESIAN_POINT('',(2.925E0,0.E0,-1.455E1));
#441=VERTEX_POINT('',#439);
#442=VERTEX_POINT('',#440);
#443=CARTESIAN_POINT('',(-2.925E0,0.E0,-1.685E1));
#444=VERTEX_POINT('',#443);
#445=CARTESIAN_POINT('',(2.925E0,0.E0,-1.685E1));
#446=VERTEX_POINT('',#445);
#447=CARTESIAN_POINT('',(-2.35E0,0.E0,-1.485E1));
#448=VERTEX_POINT('',#447);
#449=CARTESIAN_POINT('',(0.E0,-2.35E0,-1.485E1));
#450=VERTEX_POINT('',#449);
#451=CARTESIAN_POINT('',(2.35E0,0.E0,-1.485E1));
#452=VERTEX_POINT('',#451);
#453=CARTESIAN_POINT('',(0.E0,2.35E0,-1.485E1));
#454=VERTEX_POINT('',#453);
#455=CARTESIAN_POINT('',(5.07E0,4.225E0,-1.435E1));
#456=DIRECTION('',(0.E0,0.E0,-1.E0));
#457=DIRECTION('',(-1.E0,0.E0,0.E0));
#458=AXIS2_PLACEMENT_3D('',#455,#456,#457);
#459=PLANE('',#458);
#461=ORIENTED_EDGE('',*,*,#460,.T.);
#463=ORIENTED_EDGE('',*,*,#462,.T.);
#464=EDGE_LOOP('',(#461,#463));
#465=FACE_OUTER_BOUND('',#464,.F.);
#467=ORIENTED_EDGE('',*,*,#466,.T.);
#469=ORIENTED_EDGE('',*,*,#468,.T.);
#471=ORIENTED_EDGE('',*,*,#470,.T.);
#473=ORIENTED_EDGE('',*,*,#472,.T.);
#474=EDGE_LOOP('',(#467,#469,#471,#473));
#475=FACE_BOUND('',#474,.F.);
#477=CARTESIAN_POINT('',(0.E0,0.E0,-1.455E1));
#478=DIRECTION('',(0.E0,0.E0,-1.E0));
#479=DIRECTION('',(-1.E0,0.E0,0.E0));
#480=AXIS2_PLACEMENT_3D('',#477,#478,#479);
#481=TOROIDAL_SURFACE('',#480,2.725E0,2.E-1);
#482=ORIENTED_EDGE('',*,*,#460,.F.);
#484=ORIENTED_EDGE('',*,*,#483,.F.);
#486=ORIENTED_EDGE('',*,*,#485,.F.);
#488=ORIENTED_EDGE('',*,*,#487,.T.);
#489=EDGE_LOOP('',(#482,#484,#486,#488));
#490=FACE_OUTER_BOUND('',#489,.F.);
#492=CARTESIAN_POINT('',(0.E0,0.E0,-1.455E1));
#493=DIRECTION('',(0.E0,0.E0,-1.E0));
#494=DIRECTION('',(-1.E0,0.E0,0.E0));
#495=AXIS2_PLACEMENT_3D('',#492,#493,#494);
#496=TOROIDAL_SURFACE('',#495,2.725E0,2.E-1);
#497=ORIENTED_EDGE('',*,*,#462,.F.);
#498=ORIENTED_EDGE('',*,*,#487,.F.);
#500=ORIENTED_EDGE('',*,*,#499,.F.);
#501=ORIENTED_EDGE('',*,*,#483,.T.);
#502=EDGE_LOOP('',(#497,#498,#500,#501));
#503=FACE_OUTER_BOUND('',#502,.F.);
#505=CARTESIAN_POINT('',(0.E0,0.E0,-1.455E1));
#506=DIRECTION('',(0.E0,0.E0,-1.E0));
#507=DIRECTION('',(-1.E0,0.E0,0.E0));
#508=AXIS2_PLACEMENT_3D('',#505,#506,#507);
#509=TOROIDAL_SURFACE('',#508,2.725E0,2.E-1);
#511=ORIENTED_EDGE('',*,*,#510,.T.);
#513=ORIENTED_EDGE('',*,*,#512,.T.);
#514=ORIENTED_EDGE('',*,*,#499,.T.);
#516=ORIENTED_EDGE('',*,*,#515,.F.);
#517=EDGE_LOOP('',(#511,#513,#514,#516));
#518=FACE_OUTER_BOUND('',#517,.F.);
#520=CARTESIAN_POINT('',(0.E0,0.E0,-1.59E1));
#521=DIRECTION('',(0.E0,0.E0,1.E0));
#522=DIRECTION('',(1.E0,0.E0,0.E0));
#523=AXIS2_PLACEMENT_3D('',#520,#521,#522);
#524=CYLINDRICAL_SURFACE('',#523,2.925E0);
#525=ORIENTED_EDGE('',*,*,#510,.F.);
#527=ORIENTED_EDGE('',*,*,#526,.T.);
#529=ORIENTED_EDGE('',*,*,#528,.F.);
#531=ORIENTED_EDGE('',*,*,#530,.F.);
#532=EDGE_LOOP('',(#525,#527,#529,#531));
#533=FACE_OUTER_BOUND('',#532,.F.);
#535=CARTESIAN_POINT('',(0.E0,0.E0,-1.59E1));
#536=DIRECTION('',(0.E0,0.E0,1.E0));
#537=DIRECTION('',(1.E0,0.E0,0.E0));
#538=AXIS2_PLACEMENT_3D('',#535,#536,#537);
#539=CYLINDRICAL_SURFACE('',#538,2.925E0);
#541=ORIENTED_EDGE('',*,*,#540,.F.);
#542=ORIENTED_EDGE('',*,*,#530,.T.);
#544=ORIENTED_EDGE('',*,*,#543,.F.);
#545=ORIENTED_EDGE('',*,*,#526,.F.);
#546=EDGE_LOOP('',(#541,#542,#544,#545));
#547=FACE_OUTER_BOUND('',#546,.F.);
#549=CARTESIAN_POINT('',(0.E0,0.E0,-1.455E1));
#550=DIRECTION('',(0.E0,0.E0,-1.E0));
#551=DIRECTION('',(-1.E0,0.E0,0.E0));
#552=AXIS2_PLACEMENT_3D('',#549,#550,#551);
#553=TOROIDAL_SURFACE('',#552,2.725E0,2.E-1);
#554=ORIENTED_EDGE('',*,*,#540,.T.);
#555=ORIENTED_EDGE('',*,*,#515,.T.);
#556=ORIENTED_EDGE('',*,*,#485,.T.);
#557=ORIENTED_EDGE('',*,*,#512,.F.);
#558=EDGE_LOOP('',(#554,#555,#556,#557));
#559=FACE_OUTER_BOUND('',#558,.F.);
#561=CARTESIAN_POINT('',(0.E0,0.E0,-1.685E1));
#562=DIRECTION('',(0.E0,0.E0,-1.E0));
#563=DIRECTION('',(-1.E0,0.E0,0.E0));
#564=AXIS2_PLACEMENT_3D('',#561,#562,#563);
#565=PLANE('',#564);
#566=ORIENTED_EDGE('',*,*,#528,.T.);
#567=ORIENTED_EDGE('',*,*,#543,.T.);
#568=EDGE_LOOP('',(#566,#567));
#569=FACE_OUTER_BOUND('',#568,.F.);
#571=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#572=DIRECTION('',(0.E0,0.E0,-1.E0));
#573=DIRECTION('',(0.E0,1.E0,0.E0));
#574=AXIS2_PLACEMENT_3D('',#571,#572,#573);
#575=CYLINDRICAL_SURFACE('',#574,2.35E0);
#577=ORIENTED_EDGE('',*,*,#576,.T.);
#579=ORIENTED_EDGE('',*,*,#578,.F.);
#581=ORIENTED_EDGE('',*,*,#580,.F.);
#583=ORIENTED_EDGE('',*,*,#582,.F.);
#584=ORIENTED_EDGE('',*,*,#466,.F.);
#585=ORIENTED_EDGE('',*,*,#472,.F.);
#586=EDGE_LOOP('',(#577,#579,#581,#583,#584,#585));
#587=FACE_OUTER_BOUND('',#586,.F.);
#589=CARTESIAN_POINT('',(0.E0,0.E0,-1.485E1));
#590=DIRECTION('',(0.E0,0.E0,-1.E0));
#591=DIRECTION('',(0.E0,1.E0,0.E0));
#592=AXIS2_PLACEMENT_3D('',#589,#590,#591);
#593=CYLINDRICAL_SURFACE('',#592,2.35E0);
#594=ORIENTED_EDGE('',*,*,#582,.T.);
#596=ORIENTED_EDGE('',*,*,#595,.F.);
#598=ORIENTED_EDGE('',*,*,#597,.F.);
#599=ORIENTED_EDGE('',*,*,#576,.F.);
#600=ORIENTED_EDGE('',*,*,#470,.F.);
#601=ORIENTED_EDGE('',*,*,#468,.F.);
#602=EDGE_LOOP('',(#594,#596,#598,#599,#600,#601));
#603=FACE_OUTER_BOUND('',#602,.F.);
#605=CARTESIAN_POINT('',(5.07E0,4.225E0,-1.485E1));
#606=DIRECTION('',(0.E0,0.E0,-1.E0));
#607=DIRECTION('',(-1.E0,0.E0,0.E0));
#608=AXIS2_PLACEMENT_3D('',#605,#606,#607);
#609=PLANE('',#608);
#610=ORIENTED_EDGE('',*,*,#595,.T.);
#611=ORIENTED_EDGE('',*,*,#580,.T.);
#612=ORIENTED_EDGE('',*,*,#578,.T.);
#613=ORIENTED_EDGE('',*,*,#597,.T.);
#614=EDGE_LOOP('',(#610,#611,#612,#613));
#615=FACE_OUTER_BOUND('',#614,.F.);
#617=CLOSED_SHELL('',(#476,#491,#504,#519,#534,#548,#560,#570,#588,#604,#616));
#618=MANIFOLD_SOLID_BREP('',#617);
#620=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#622=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#621);
#623=(CONVERSION_BASED_UNIT('DEGREE',#622)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#625=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(8.644994094045E-4),#619,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#627=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#628=DIRECTION('',(0.E0,0.E0,1.E0));
#629=DIRECTION('',(1.E0,0.E0,0.E0));
#632=MECHANICAL_CONTEXT('',#281,'mechanical');
#633=PRODUCT('MANIFOLD_SOLID_BREP_160','MANIFOLD_SOLID_BREP_160',
'NOT SPECIFIED',(#632));
#634=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',#633,
.MADE.);
#640=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#641=DIRECTION('',(0.E0,0.E0,1.E0));
#642=DIRECTION('',(1.E0,0.E0,0.E0));
#643=AXIS2_PLACEMENT_3D('',#640,#641,#642);
#644=ITEM_DEFINED_TRANSFORMATION('','',#630,#643);
#645=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#646=DIRECTION('',(0.E0,0.E0,1.E0));
#647=DIRECTION('',(1.E0,0.E0,0.E0));
#649=(REPRESENTATION_RELATIONSHIP('','',#631,#292)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#644)SHAPE_REPRESENTATION_RELATIONSHIP());
#650=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#649,#639);
#651=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#652=DIRECTION('',(0.E0,0.E0,1.E0));
#653=DIRECTION('',(-1.E0,0.E0,0.E0));
#654=AXIS2_PLACEMENT_3D('',#651,#652,#653);
#656=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#657=DIRECTION('',(0.E0,0.E0,1.E0));
#658=DIRECTION('',(1.E0,0.E0,0.E0));
#659=AXIS2_PLACEMENT_3D('',#656,#657,#658);
#661=DIRECTION('',(0.E0,0.E0,1.E0));
#662=VECTOR('',#661,1.99E0);
#663=CARTESIAN_POINT('',(-2.55E0,0.E0,-1.63E1));
#664=LINE('',#663,#662);
#665=DIRECTION('',(0.E0,0.E0,1.E0));
#666=VECTOR('',#665,1.99E0);
#667=CARTESIAN_POINT('',(2.55E0,0.E0,-1.63E1));
#668=LINE('',#667,#666);
#669=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#670=DIRECTION('',(0.E0,0.E0,-1.E0));
#671=DIRECTION('',(1.E0,0.E0,0.E0));
#672=AXIS2_PLACEMENT_3D('',#669,#670,#671);
#674=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#675=DIRECTION('',(0.E0,0.E0,-1.E0));
#676=DIRECTION('',(-1.E0,0.E0,0.E0));
#677=AXIS2_PLACEMENT_3D('',#674,#675,#676);
#679=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#680=DIRECTION('',(0.E0,0.E0,1.E0));
#681=DIRECTION('',(-1.E0,0.E0,0.E0));
#682=AXIS2_PLACEMENT_3D('',#679,#680,#681);
#684=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#685=DIRECTION('',(0.E0,0.E0,1.E0));
#686=DIRECTION('',(1.E0,0.E0,0.E0));
#687=AXIS2_PLACEMENT_3D('',#684,#685,#686);
#689=DIRECTION('',(0.E0,0.E0,1.E0));
#690=VECTOR('',#689,1.E-2);
#691=CARTESIAN_POINT('',(-2.35E0,0.E0,-1.431E1));
#692=LINE('',#691,#690);
#693=DIRECTION('',(0.E0,0.E0,1.E0));
#694=VECTOR('',#693,1.E-2);
#695=CARTESIAN_POINT('',(2.35E0,0.E0,-1.431E1));
#696=LINE('',#695,#694);
#697=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#698=DIRECTION('',(0.E0,0.E0,-1.E0));
#699=DIRECTION('',(1.E0,0.E0,0.E0));
#700=AXIS2_PLACEMENT_3D('',#697,#698,#699);
#702=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#703=DIRECTION('',(0.E0,0.E0,-1.E0));
#704=DIRECTION('',(-1.E0,0.E0,0.E0));
#705=AXIS2_PLACEMENT_3D('',#702,#703,#704);
#707=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#708=DIRECTION('',(0.E0,0.E0,1.E0));
#709=DIRECTION('',(1.E0,0.E0,0.E0));
#710=AXIS2_PLACEMENT_3D('',#707,#708,#709);
#712=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#713=DIRECTION('',(0.E0,0.E0,1.E0));
#714=DIRECTION('',(-1.E0,0.E0,0.E0));
#715=AXIS2_PLACEMENT_3D('',#712,#713,#714);
#717=DIRECTION('',(0.E0,0.E0,1.E0));
#718=VECTOR('',#717,1.E-2);
#719=CARTESIAN_POINT('',(-1.85E0,0.E0,-1.431E1));
#720=LINE('',#719,#718);
#721=DIRECTION('',(0.E0,0.E0,1.E0));
#722=VECTOR('',#721,1.E-2);
#723=CARTESIAN_POINT('',(1.85E0,0.E0,-1.431E1));
#724=LINE('',#723,#722);
#725=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#726=DIRECTION('',(0.E0,0.E0,-1.E0));
#727=DIRECTION('',(-1.E0,0.E0,0.E0));
#728=AXIS2_PLACEMENT_3D('',#725,#726,#727);
#730=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#731=DIRECTION('',(0.E0,0.E0,-1.E0));
#732=DIRECTION('',(1.E0,0.E0,0.E0));
#733=AXIS2_PLACEMENT_3D('',#730,#731,#732);
#735=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#736=DIRECTION('',(0.E0,0.E0,1.E0));
#737=DIRECTION('',(-1.E0,0.E0,0.E0));
#738=AXIS2_PLACEMENT_3D('',#735,#736,#737);
#740=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#741=DIRECTION('',(0.E0,0.E0,1.E0));
#742=DIRECTION('',(1.E0,0.E0,0.E0));
#743=AXIS2_PLACEMENT_3D('',#740,#741,#742);
#745=DIRECTION('',(0.E0,0.E0,1.E0));
#746=VECTOR('',#745,1.E-2);
#747=CARTESIAN_POINT('',(-1.65E0,0.E0,-1.431E1));
#748=LINE('',#747,#746);
#749=DIRECTION('',(0.E0,0.E0,1.E0));
#750=VECTOR('',#749,1.E-2);
#751=CARTESIAN_POINT('',(1.65E0,0.E0,-1.431E1));
#752=LINE('',#751,#750);
#753=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#754=DIRECTION('',(0.E0,0.E0,-1.E0));
#755=DIRECTION('',(1.E0,0.E0,0.E0));
#756=AXIS2_PLACEMENT_3D('',#753,#754,#755);
#758=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#759=DIRECTION('',(0.E0,0.E0,-1.E0));
#760=DIRECTION('',(-1.E0,0.E0,0.E0));
#761=AXIS2_PLACEMENT_3D('',#758,#759,#760);
#763=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#764=DIRECTION('',(0.E0,0.E0,1.E0));
#765=DIRECTION('',(1.E0,0.E0,0.E0));
#766=AXIS2_PLACEMENT_3D('',#763,#764,#765);
#768=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#769=DIRECTION('',(0.E0,0.E0,1.E0));
#770=DIRECTION('',(-1.E0,0.E0,0.E0));
#771=AXIS2_PLACEMENT_3D('',#768,#769,#770);
#773=DIRECTION('',(0.E0,0.E0,1.E0));
#774=VECTOR('',#773,1.E-2);
#775=CARTESIAN_POINT('',(-1.15E0,0.E0,-1.431E1));
#776=LINE('',#775,#774);
#777=DIRECTION('',(0.E0,0.E0,1.E0));
#778=VECTOR('',#777,1.E-2);
#779=CARTESIAN_POINT('',(1.15E0,0.E0,-1.431E1));
#780=LINE('',#779,#778);
#781=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#782=DIRECTION('',(0.E0,0.E0,-1.E0));
#783=DIRECTION('',(-1.E0,0.E0,0.E0));
#784=AXIS2_PLACEMENT_3D('',#781,#782,#783);
#786=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#787=DIRECTION('',(0.E0,0.E0,-1.E0));
#788=DIRECTION('',(1.E0,0.E0,0.E0));
#789=AXIS2_PLACEMENT_3D('',#786,#787,#788);
#791=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#792=DIRECTION('',(0.E0,0.E0,1.E0));
#793=DIRECTION('',(-1.E0,0.E0,0.E0));
#794=AXIS2_PLACEMENT_3D('',#791,#792,#793);
#796=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#797=DIRECTION('',(0.E0,0.E0,1.E0));
#798=DIRECTION('',(1.E0,0.E0,0.E0));
#799=AXIS2_PLACEMENT_3D('',#796,#797,#798);
#801=DIRECTION('',(0.E0,0.E0,1.E0));
#802=VECTOR('',#801,1.E-2);
#803=CARTESIAN_POINT('',(-9.5E-1,0.E0,-1.431E1));
#804=LINE('',#803,#802);
#805=DIRECTION('',(0.E0,0.E0,1.E0));
#806=VECTOR('',#805,1.E-2);
#807=CARTESIAN_POINT('',(9.5E-1,0.E0,-1.431E1));
#808=LINE('',#807,#806);
#809=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#810=DIRECTION('',(0.E0,0.E0,-1.E0));
#811=DIRECTION('',(1.E0,0.E0,0.E0));
#812=AXIS2_PLACEMENT_3D('',#809,#810,#811);
#814=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#815=DIRECTION('',(0.E0,0.E0,-1.E0));
#816=DIRECTION('',(-1.E0,0.E0,0.E0));
#817=AXIS2_PLACEMENT_3D('',#814,#815,#816);
#819=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#820=DIRECTION('',(0.E0,0.E0,1.E0));
#821=DIRECTION('',(1.E0,0.E0,0.E0));
#822=AXIS2_PLACEMENT_3D('',#819,#820,#821);
#824=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#825=DIRECTION('',(0.E0,0.E0,1.E0));
#826=DIRECTION('',(-1.E0,0.E0,0.E0));
#827=AXIS2_PLACEMENT_3D('',#824,#825,#826);
#829=DIRECTION('',(0.E0,0.E0,1.E0));
#830=VECTOR('',#829,1.E-2);
#831=CARTESIAN_POINT('',(-4.5E-1,0.E0,-1.431E1));
#832=LINE('',#831,#830);
#833=DIRECTION('',(0.E0,0.E0,1.E0));
#834=VECTOR('',#833,1.E-2);
#835=CARTESIAN_POINT('',(4.5E-1,0.E0,-1.431E1));
#836=LINE('',#835,#834);
#837=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#838=DIRECTION('',(0.E0,0.E0,-1.E0));
#839=DIRECTION('',(-1.E0,0.E0,0.E0));
#840=AXIS2_PLACEMENT_3D('',#837,#838,#839);
#842=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#843=DIRECTION('',(0.E0,0.E0,-1.E0));
#844=DIRECTION('',(1.E0,0.E0,0.E0));
#845=AXIS2_PLACEMENT_3D('',#842,#843,#844);
#847=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#848=DIRECTION('',(0.E0,0.E0,1.E0));
#849=DIRECTION('',(-1.E0,0.E0,0.E0));
#850=AXIS2_PLACEMENT_3D('',#847,#848,#849);
#852=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#853=DIRECTION('',(0.E0,0.E0,1.E0));
#854=DIRECTION('',(1.E0,0.E0,0.E0));
#855=AXIS2_PLACEMENT_3D('',#852,#853,#854);
#857=DIRECTION('',(0.E0,0.E0,1.E0));
#858=VECTOR('',#857,1.E-2);
#859=CARTESIAN_POINT('',(-2.5E-1,0.E0,-1.431E1));
#860=LINE('',#859,#858);
#861=DIRECTION('',(0.E0,0.E0,1.E0));
#862=VECTOR('',#861,1.E-2);
#863=CARTESIAN_POINT('',(2.5E-1,0.E0,-1.431E1));
#864=LINE('',#863,#862);
#865=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#866=DIRECTION('',(0.E0,0.E0,-1.E0));
#867=DIRECTION('',(1.E0,0.E0,0.E0));
#868=AXIS2_PLACEMENT_3D('',#865,#866,#867);
#870=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#871=DIRECTION('',(0.E0,0.E0,-1.E0));
#872=DIRECTION('',(-1.E0,0.E0,0.E0));
#873=AXIS2_PLACEMENT_3D('',#870,#871,#872);
#875=CARTESIAN_POINT('',(-2.55E0,0.E0,-1.63E1));
#876=CARTESIAN_POINT('',(2.55E0,0.E0,-1.63E1));
#877=VERTEX_POINT('',#875);
#878=VERTEX_POINT('',#876);
#879=CARTESIAN_POINT('',(2.55E0,0.E0,-1.431E1));
#880=VERTEX_POINT('',#879);
#881=CARTESIAN_POINT('',(-2.55E0,0.E0,-1.431E1));
#882=VERTEX_POINT('',#881);
#883=CARTESIAN_POINT('',(-2.35E0,0.E0,-1.431E1));
#884=CARTESIAN_POINT('',(2.35E0,0.E0,-1.431E1));
#885=VERTEX_POINT('',#883);
#886=VERTEX_POINT('',#884);
#887=CARTESIAN_POINT('',(2.35E0,0.E0,-1.43E1));
#888=VERTEX_POINT('',#887);
#889=CARTESIAN_POINT('',(-2.35E0,0.E0,-1.43E1));
#890=VERTEX_POINT('',#889);
#891=CARTESIAN_POINT('',(1.85E0,0.E0,-1.43E1));
#892=CARTESIAN_POINT('',(-1.85E0,0.E0,-1.43E1));
#893=VERTEX_POINT('',#891);
#894=VERTEX_POINT('',#892);
#895=CARTESIAN_POINT('',(1.85E0,0.E0,-1.431E1));
#896=VERTEX_POINT('',#895);
#897=CARTESIAN_POINT('',(-1.85E0,0.E0,-1.431E1));
#898=VERTEX_POINT('',#897);
#899=CARTESIAN_POINT('',(-1.65E0,0.E0,-1.431E1));
#900=CARTESIAN_POINT('',(1.65E0,0.E0,-1.431E1));
#901=VERTEX_POINT('',#899);
#902=VERTEX_POINT('',#900);
#903=CARTESIAN_POINT('',(1.65E0,0.E0,-1.43E1));
#904=VERTEX_POINT('',#903);
#905=CARTESIAN_POINT('',(-1.65E0,0.E0,-1.43E1));
#906=VERTEX_POINT('',#905);
#907=CARTESIAN_POINT('',(1.15E0,0.E0,-1.43E1));
#908=CARTESIAN_POINT('',(-1.15E0,0.E0,-1.43E1));
#909=VERTEX_POINT('',#907);
#910=VERTEX_POINT('',#908);
#911=CARTESIAN_POINT('',(1.15E0,0.E0,-1.431E1));
#912=VERTEX_POINT('',#911);
#913=CARTESIAN_POINT('',(-1.15E0,0.E0,-1.431E1));
#914=VERTEX_POINT('',#913);
#915=CARTESIAN_POINT('',(-9.5E-1,0.E0,-1.431E1));
#916=CARTESIAN_POINT('',(9.5E-1,0.E0,-1.431E1));
#917=VERTEX_POINT('',#915);
#918=VERTEX_POINT('',#916);
#919=CARTESIAN_POINT('',(9.5E-1,0.E0,-1.43E1));
#920=VERTEX_POINT('',#919);
#921=CARTESIAN_POINT('',(-9.5E-1,0.E0,-1.43E1));
#922=VERTEX_POINT('',#921);
#923=CARTESIAN_POINT('',(4.5E-1,0.E0,-1.43E1));
#924=CARTESIAN_POINT('',(-4.5E-1,0.E0,-1.43E1));
#925=VERTEX_POINT('',#923);
#926=VERTEX_POINT('',#924);
#927=CARTESIAN_POINT('',(4.5E-1,0.E0,-1.431E1));
#928=VERTEX_POINT('',#927);
#929=CARTESIAN_POINT('',(-4.5E-1,0.E0,-1.431E1));
#930=VERTEX_POINT('',#929);
#931=CARTESIAN_POINT('',(-2.5E-1,0.E0,-1.431E1));
#932=CARTESIAN_POINT('',(2.5E-1,0.E0,-1.431E1));
#933=VERTEX_POINT('',#931);
#934=VERTEX_POINT('',#932);
#935=CARTESIAN_POINT('',(2.5E-1,0.E0,-1.43E1));
#936=VERTEX_POINT('',#935);
#937=CARTESIAN_POINT('',(-2.5E-1,0.E0,-1.43E1));
#938=VERTEX_POINT('',#937);
#939=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#940=DIRECTION('',(0.E0,0.E0,1.E0));
#941=DIRECTION('',(1.E0,0.E0,0.E0));
#942=AXIS2_PLACEMENT_3D('',#939,#940,#941);
#943=PLANE('',#942);
#945=ORIENTED_EDGE('',*,*,#944,.T.);
#947=ORIENTED_EDGE('',*,*,#946,.T.);
#948=EDGE_LOOP('',(#945,#947));
#949=FACE_OUTER_BOUND('',#948,.F.);
#951=CARTESIAN_POINT('',(0.E0,0.E0,-1.48E1));
#952=DIRECTION('',(0.E0,0.E0,1.E0));
#953=DIRECTION('',(1.E0,0.E0,0.E0));
#954=AXIS2_PLACEMENT_3D('',#951,#952,#953);
#955=CYLINDRICAL_SURFACE('',#954,2.55E0);
#957=ORIENTED_EDGE('',*,*,#956,.F.);
#958=ORIENTED_EDGE('',*,*,#944,.F.);
#960=ORIENTED_EDGE('',*,*,#959,.T.);
#962=ORIENTED_EDGE('',*,*,#961,.F.);
#963=EDGE_LOOP('',(#957,#958,#960,#962));
#964=FACE_OUTER_BOUND('',#963,.F.);
#966=CARTESIAN_POINT('',(0.E0,0.E0,-1.48E1));
#967=DIRECTION('',(0.E0,0.E0,1.E0));
#968=DIRECTION('',(1.E0,0.E0,0.E0));
#969=AXIS2_PLACEMENT_3D('',#966,#967,#968);
#970=CYLINDRICAL_SURFACE('',#969,2.55E0);
#971=ORIENTED_EDGE('',*,*,#959,.F.);
#972=ORIENTED_EDGE('',*,*,#946,.F.);
#973=ORIENTED_EDGE('',*,*,#956,.T.);
#975=ORIENTED_EDGE('',*,*,#974,.F.);
#976=EDGE_LOOP('',(#971,#972,#973,#975));
#977=FACE_OUTER_BOUND('',#976,.F.);
#979=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#980=DIRECTION('',(0.E0,0.E0,1.E0));
#981=DIRECTION('',(1.E0,0.E0,0.E0));
#982=AXIS2_PLACEMENT_3D('',#979,#980,#981);
#983=PLANE('',#982);
#984=ORIENTED_EDGE('',*,*,#961,.T.);
#985=ORIENTED_EDGE('',*,*,#974,.T.);
#986=EDGE_LOOP('',(#984,#985));
#987=FACE_OUTER_BOUND('',#986,.F.);
#989=ORIENTED_EDGE('',*,*,#988,.T.);
#991=ORIENTED_EDGE('',*,*,#990,.T.);
#992=EDGE_LOOP('',(#989,#991));
#993=FACE_BOUND('',#992,.F.);
#995=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#996=DIRECTION('',(0.E0,0.E0,1.E0));
#997=DIRECTION('',(1.E0,0.E0,0.E0));
#998=AXIS2_PLACEMENT_3D('',#995,#996,#997);
#999=CYLINDRICAL_SURFACE('',#998,2.35E0);
#1001=ORIENTED_EDGE('',*,*,#1000,.F.);
#1002=ORIENTED_EDGE('',*,*,#988,.F.);
#1004=ORIENTED_EDGE('',*,*,#1003,.T.);
#1006=ORIENTED_EDGE('',*,*,#1005,.F.);
#1007=EDGE_LOOP('',(#1001,#1002,#1004,#1006));
#1008=FACE_OUTER_BOUND('',#1007,.F.);
#1010=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1011=DIRECTION('',(0.E0,0.E0,1.E0));
#1012=DIRECTION('',(1.E0,0.E0,0.E0));
#1013=AXIS2_PLACEMENT_3D('',#1010,#1011,#1012);
#1014=CYLINDRICAL_SURFACE('',#1013,2.35E0);
#1015=ORIENTED_EDGE('',*,*,#1003,.F.);
#1016=ORIENTED_EDGE('',*,*,#990,.F.);
#1017=ORIENTED_EDGE('',*,*,#1000,.T.);
#1019=ORIENTED_EDGE('',*,*,#1018,.F.);
#1020=EDGE_LOOP('',(#1015,#1016,#1017,#1019));
#1021=FACE_OUTER_BOUND('',#1020,.F.);
#1023=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#1024=DIRECTION('',(0.E0,0.E0,1.E0));
#1025=DIRECTION('',(1.E0,0.E0,0.E0));
#1026=AXIS2_PLACEMENT_3D('',#1023,#1024,#1025);
#1027=PLANE('',#1026);
#1028=ORIENTED_EDGE('',*,*,#1005,.T.);
#1029=ORIENTED_EDGE('',*,*,#1018,.T.);
#1030=EDGE_LOOP('',(#1028,#1029));
#1031=FACE_OUTER_BOUND('',#1030,.F.);
#1033=ORIENTED_EDGE('',*,*,#1032,.T.);
#1035=ORIENTED_EDGE('',*,*,#1034,.T.);
#1036=EDGE_LOOP('',(#1033,#1035));
#1037=FACE_BOUND('',#1036,.F.);
#1039=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1040=DIRECTION('',(0.E0,0.E0,1.E0));
#1041=DIRECTION('',(1.E0,0.E0,0.E0));
#1042=AXIS2_PLACEMENT_3D('',#1039,#1040,#1041);
#1043=CYLINDRICAL_SURFACE('',#1042,1.85E0);
#1045=ORIENTED_EDGE('',*,*,#1044,.F.);
#1047=ORIENTED_EDGE('',*,*,#1046,.F.);
#1049=ORIENTED_EDGE('',*,*,#1048,.T.);
#1050=ORIENTED_EDGE('',*,*,#1032,.F.);
#1051=EDGE_LOOP('',(#1045,#1047,#1049,#1050));
#1052=FACE_OUTER_BOUND('',#1051,.F.);
#1054=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1055=DIRECTION('',(0.E0,0.E0,1.E0));
#1056=DIRECTION('',(1.E0,0.E0,0.E0));
#1057=AXIS2_PLACEMENT_3D('',#1054,#1055,#1056);
#1058=CYLINDRICAL_SURFACE('',#1057,1.85E0);
#1059=ORIENTED_EDGE('',*,*,#1048,.F.);
#1061=ORIENTED_EDGE('',*,*,#1060,.F.);
#1062=ORIENTED_EDGE('',*,*,#1044,.T.);
#1063=ORIENTED_EDGE('',*,*,#1034,.F.);
#1064=EDGE_LOOP('',(#1059,#1061,#1062,#1063));
#1065=FACE_OUTER_BOUND('',#1064,.F.);
#1067=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1068=DIRECTION('',(0.E0,0.E0,1.E0));
#1069=DIRECTION('',(1.E0,0.E0,0.E0));
#1070=AXIS2_PLACEMENT_3D('',#1067,#1068,#1069);
#1071=PLANE('',#1070);
#1072=ORIENTED_EDGE('',*,*,#1046,.T.);
#1073=ORIENTED_EDGE('',*,*,#1060,.T.);
#1074=EDGE_LOOP('',(#1072,#1073));
#1075=FACE_OUTER_BOUND('',#1074,.F.);
#1077=ORIENTED_EDGE('',*,*,#1076,.T.);
#1079=ORIENTED_EDGE('',*,*,#1078,.T.);
#1080=EDGE_LOOP('',(#1077,#1079));
#1081=FACE_BOUND('',#1080,.F.);
#1083=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1084=DIRECTION('',(0.E0,0.E0,1.E0));
#1085=DIRECTION('',(1.E0,0.E0,0.E0));
#1086=AXIS2_PLACEMENT_3D('',#1083,#1084,#1085);
#1087=CYLINDRICAL_SURFACE('',#1086,1.65E0);
#1089=ORIENTED_EDGE('',*,*,#1088,.F.);
#1090=ORIENTED_EDGE('',*,*,#1076,.F.);
#1092=ORIENTED_EDGE('',*,*,#1091,.T.);
#1094=ORIENTED_EDGE('',*,*,#1093,.F.);
#1095=EDGE_LOOP('',(#1089,#1090,#1092,#1094));
#1096=FACE_OUTER_BOUND('',#1095,.F.);
#1098=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1099=DIRECTION('',(0.E0,0.E0,1.E0));
#1100=DIRECTION('',(1.E0,0.E0,0.E0));
#1101=AXIS2_PLACEMENT_3D('',#1098,#1099,#1100);
#1102=CYLINDRICAL_SURFACE('',#1101,1.65E0);
#1103=ORIENTED_EDGE('',*,*,#1091,.F.);
#1104=ORIENTED_EDGE('',*,*,#1078,.F.);
#1105=ORIENTED_EDGE('',*,*,#1088,.T.);
#1107=ORIENTED_EDGE('',*,*,#1106,.F.);
#1108=EDGE_LOOP('',(#1103,#1104,#1105,#1107));
#1109=FACE_OUTER_BOUND('',#1108,.F.);
#1111=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#1112=DIRECTION('',(0.E0,0.E0,1.E0));
#1113=DIRECTION('',(1.E0,0.E0,0.E0));
#1114=AXIS2_PLACEMENT_3D('',#1111,#1112,#1113);
#1115=PLANE('',#1114);
#1116=ORIENTED_EDGE('',*,*,#1093,.T.);
#1117=ORIENTED_EDGE('',*,*,#1106,.T.);
#1118=EDGE_LOOP('',(#1116,#1117));
#1119=FACE_OUTER_BOUND('',#1118,.F.);
#1121=ORIENTED_EDGE('',*,*,#1120,.T.);
#1123=ORIENTED_EDGE('',*,*,#1122,.T.);
#1124=EDGE_LOOP('',(#1121,#1123));
#1125=FACE_BOUND('',#1124,.F.);
#1127=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1128=DIRECTION('',(0.E0,0.E0,1.E0));
#1129=DIRECTION('',(1.E0,0.E0,0.E0));
#1130=AXIS2_PLACEMENT_3D('',#1127,#1128,#1129);
#1131=CYLINDRICAL_SURFACE('',#1130,1.15E0);
#1133=ORIENTED_EDGE('',*,*,#1132,.F.);
#1135=ORIENTED_EDGE('',*,*,#1134,.F.);
#1137=ORIENTED_EDGE('',*,*,#1136,.T.);
#1138=ORIENTED_EDGE('',*,*,#1120,.F.);
#1139=EDGE_LOOP('',(#1133,#1135,#1137,#1138));
#1140=FACE_OUTER_BOUND('',#1139,.F.);
#1142=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1143=DIRECTION('',(0.E0,0.E0,1.E0));
#1144=DIRECTION('',(1.E0,0.E0,0.E0));
#1145=AXIS2_PLACEMENT_3D('',#1142,#1143,#1144);
#1146=CYLINDRICAL_SURFACE('',#1145,1.15E0);
#1147=ORIENTED_EDGE('',*,*,#1136,.F.);
#1149=ORIENTED_EDGE('',*,*,#1148,.F.);
#1150=ORIENTED_EDGE('',*,*,#1132,.T.);
#1151=ORIENTED_EDGE('',*,*,#1122,.F.);
#1152=EDGE_LOOP('',(#1147,#1149,#1150,#1151));
#1153=FACE_OUTER_BOUND('',#1152,.F.);
#1155=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1156=DIRECTION('',(0.E0,0.E0,1.E0));
#1157=DIRECTION('',(1.E0,0.E0,0.E0));
#1158=AXIS2_PLACEMENT_3D('',#1155,#1156,#1157);
#1159=PLANE('',#1158);
#1160=ORIENTED_EDGE('',*,*,#1134,.T.);
#1161=ORIENTED_EDGE('',*,*,#1148,.T.);
#1162=EDGE_LOOP('',(#1160,#1161));
#1163=FACE_OUTER_BOUND('',#1162,.F.);
#1165=ORIENTED_EDGE('',*,*,#1164,.T.);
#1167=ORIENTED_EDGE('',*,*,#1166,.T.);
#1168=EDGE_LOOP('',(#1165,#1167));
#1169=FACE_BOUND('',#1168,.F.);
#1171=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1172=DIRECTION('',(0.E0,0.E0,1.E0));
#1173=DIRECTION('',(1.E0,0.E0,0.E0));
#1174=AXIS2_PLACEMENT_3D('',#1171,#1172,#1173);
#1175=CYLINDRICAL_SURFACE('',#1174,9.5E-1);
#1177=ORIENTED_EDGE('',*,*,#1176,.F.);
#1178=ORIENTED_EDGE('',*,*,#1164,.F.);
#1180=ORIENTED_EDGE('',*,*,#1179,.T.);
#1182=ORIENTED_EDGE('',*,*,#1181,.F.);
#1183=EDGE_LOOP('',(#1177,#1178,#1180,#1182));
#1184=FACE_OUTER_BOUND('',#1183,.F.);
#1186=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1187=DIRECTION('',(0.E0,0.E0,1.E0));
#1188=DIRECTION('',(1.E0,0.E0,0.E0));
#1189=AXIS2_PLACEMENT_3D('',#1186,#1187,#1188);
#1190=CYLINDRICAL_SURFACE('',#1189,9.5E-1);
#1191=ORIENTED_EDGE('',*,*,#1179,.F.);
#1192=ORIENTED_EDGE('',*,*,#1166,.F.);
#1193=ORIENTED_EDGE('',*,*,#1176,.T.);
#1195=ORIENTED_EDGE('',*,*,#1194,.F.);
#1196=EDGE_LOOP('',(#1191,#1192,#1193,#1195));
#1197=FACE_OUTER_BOUND('',#1196,.F.);
#1199=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#1200=DIRECTION('',(0.E0,0.E0,1.E0));
#1201=DIRECTION('',(1.E0,0.E0,0.E0));
#1202=AXIS2_PLACEMENT_3D('',#1199,#1200,#1201);
#1203=PLANE('',#1202);
#1204=ORIENTED_EDGE('',*,*,#1181,.T.);
#1205=ORIENTED_EDGE('',*,*,#1194,.T.);
#1206=EDGE_LOOP('',(#1204,#1205));
#1207=FACE_OUTER_BOUND('',#1206,.F.);
#1209=ORIENTED_EDGE('',*,*,#1208,.T.);
#1211=ORIENTED_EDGE('',*,*,#1210,.T.);
#1212=EDGE_LOOP('',(#1209,#1211));
#1213=FACE_BOUND('',#1212,.F.);
#1215=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1216=DIRECTION('',(0.E0,0.E0,1.E0));
#1217=DIRECTION('',(1.E0,0.E0,0.E0));
#1218=AXIS2_PLACEMENT_3D('',#1215,#1216,#1217);
#1219=CYLINDRICAL_SURFACE('',#1218,4.5E-1);
#1221=ORIENTED_EDGE('',*,*,#1220,.F.);
#1223=ORIENTED_EDGE('',*,*,#1222,.F.);
#1225=ORIENTED_EDGE('',*,*,#1224,.T.);
#1226=ORIENTED_EDGE('',*,*,#1208,.F.);
#1227=EDGE_LOOP('',(#1221,#1223,#1225,#1226));
#1228=FACE_OUTER_BOUND('',#1227,.F.);
#1230=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1231=DIRECTION('',(0.E0,0.E0,1.E0));
#1232=DIRECTION('',(1.E0,0.E0,0.E0));
#1233=AXIS2_PLACEMENT_3D('',#1230,#1231,#1232);
#1234=CYLINDRICAL_SURFACE('',#1233,4.5E-1);
#1235=ORIENTED_EDGE('',*,*,#1224,.F.);
#1237=ORIENTED_EDGE('',*,*,#1236,.F.);
#1238=ORIENTED_EDGE('',*,*,#1220,.T.);
#1239=ORIENTED_EDGE('',*,*,#1210,.F.);
#1240=EDGE_LOOP('',(#1235,#1237,#1238,#1239));
#1241=FACE_OUTER_BOUND('',#1240,.F.);
#1243=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1244=DIRECTION('',(0.E0,0.E0,1.E0));
#1245=DIRECTION('',(1.E0,0.E0,0.E0));
#1246=AXIS2_PLACEMENT_3D('',#1243,#1244,#1245);
#1247=PLANE('',#1246);
#1248=ORIENTED_EDGE('',*,*,#1222,.T.);
#1249=ORIENTED_EDGE('',*,*,#1236,.T.);
#1250=EDGE_LOOP('',(#1248,#1249));
#1251=FACE_OUTER_BOUND('',#1250,.F.);
#1253=ORIENTED_EDGE('',*,*,#1252,.T.);
#1255=ORIENTED_EDGE('',*,*,#1254,.T.);
#1256=EDGE_LOOP('',(#1253,#1255));
#1257=FACE_BOUND('',#1256,.F.);
#1259=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1260=DIRECTION('',(0.E0,0.E0,1.E0));
#1261=DIRECTION('',(1.E0,0.E0,0.E0));
#1262=AXIS2_PLACEMENT_3D('',#1259,#1260,#1261);
#1263=CYLINDRICAL_SURFACE('',#1262,2.5E-1);
#1265=ORIENTED_EDGE('',*,*,#1264,.F.);
#1266=ORIENTED_EDGE('',*,*,#1252,.F.);
#1268=ORIENTED_EDGE('',*,*,#1267,.T.);
#1270=ORIENTED_EDGE('',*,*,#1269,.F.);
#1271=EDGE_LOOP('',(#1265,#1266,#1268,#1270));
#1272=FACE_OUTER_BOUND('',#1271,.F.);
#1274=CARTESIAN_POINT('',(0.E0,0.E0,-1.431E1));
#1275=DIRECTION('',(0.E0,0.E0,1.E0));
#1276=DIRECTION('',(1.E0,0.E0,0.E0));
#1277=AXIS2_PLACEMENT_3D('',#1274,#1275,#1276);
#1278=CYLINDRICAL_SURFACE('',#1277,2.5E-1);
#1279=ORIENTED_EDGE('',*,*,#1267,.F.);
#1280=ORIENTED_EDGE('',*,*,#1254,.F.);
#1281=ORIENTED_EDGE('',*,*,#1264,.T.);
#1283=ORIENTED_EDGE('',*,*,#1282,.F.);
#1284=EDGE_LOOP('',(#1279,#1280,#1281,#1283));
#1285=FACE_OUTER_BOUND('',#1284,.F.);
#1287=CARTESIAN_POINT('',(0.E0,0.E0,-1.43E1));
#1288=DIRECTION('',(0.E0,0.E0,1.E0));
#1289=DIRECTION('',(1.E0,0.E0,0.E0));
#1290=AXIS2_PLACEMENT_3D('',#1287,#1288,#1289);
#1291=PLANE('',#1290);
#1292=ORIENTED_EDGE('',*,*,#1269,.T.);
#1293=ORIENTED_EDGE('',*,*,#1282,.T.);
#1294=EDGE_LOOP('',(#1292,#1293));
#1295=FACE_OUTER_BOUND('',#1294,.F.);
#1297=CLOSED_SHELL('',(#950,#965,#978,#994,#1009,#1022,#1038,#1053,#1066,#1082,
#1097,#1110,#1126,#1141,#1154,#1170,#1185,#1198,#1214,#1229,#1242,#1258,#1273,
#1286,#1296));
#1298=MANIFOLD_SOLID_BREP('',#1297);
#1300=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1302=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1301);
#1303=(CONVERSION_BASED_UNIT('DEGREE',#1302)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1305=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.486731231127E-4),#1299,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1307=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1308=DIRECTION('',(0.E0,0.E0,1.E0));
#1309=DIRECTION('',(1.E0,0.E0,0.E0));
#1312=DESIGN_CONTEXT('',#281,'design');
#1313=MECHANICAL_CONTEXT('',#281,'mechanical');
#1314=PRODUCT('MANIFOLD_SOLID_BREP_161','MANIFOLD_SOLID_BREP_161',
'NOT SPECIFIED',(#1313));
#1315=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1314,.MADE.);
#1321=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1322=DIRECTION('',(0.E0,0.E0,1.E0));
#1323=DIRECTION('',(1.E0,0.E0,0.E0));
#1324=AXIS2_PLACEMENT_3D('',#1321,#1322,#1323);
#1325=ITEM_DEFINED_TRANSFORMATION('','',#1310,#1324);
#1326=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1327=DIRECTION('',(0.E0,0.E0,1.E0));
#1328=DIRECTION('',(1.E0,0.E0,0.E0));
#1330=(REPRESENTATION_RELATIONSHIP('','',#1311,#292)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1325)SHAPE_REPRESENTATION_RELATIONSHIP());
#1331=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1330,#1320);
#1333=DIRECTION('',(0.E0,0.E0,1.E0));
#1334=VECTOR('',#1333,6.E-1);
#1335=CARTESIAN_POINT('',(4.5E0,0.E0,-1.69E1));
#1336=LINE('',#1335,#1334);
#1337=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#1338=DIRECTION('',(0.E0,0.E0,-1.E0));
#1339=DIRECTION('',(-1.E0,0.E0,0.E0));
#1340=AXIS2_PLACEMENT_3D('',#1337,#1338,#1339);
#1342=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#1343=DIRECTION('',(0.E0,0.E0,-1.E0));
#1344=DIRECTION('',(1.E0,0.E0,0.E0));
#1345=AXIS2_PLACEMENT_3D('',#1342,#1343,#1344);
#1347=DIRECTION('',(0.E0,0.E0,1.E0));
#1348=VECTOR('',#1347,6.E-1);
#1349=CARTESIAN_POINT('',(-4.5E0,0.E0,-1.69E1));
#1350=LINE('',#1349,#1348);
#1351=CARTESIAN_POINT('',(0.E0,0.E0,-1.69E1));
#1352=DIRECTION('',(0.E0,0.E0,1.E0));
#1353=DIRECTION('',(-1.E0,0.E0,0.E0));
#1354=AXIS2_PLACEMENT_3D('',#1351,#1352,#1353);
#1356=CARTESIAN_POINT('',(0.E0,0.E0,-1.69E1));
#1357=DIRECTION('',(0.E0,0.E0,1.E0));
#1358=DIRECTION('',(1.E0,0.E0,0.E0));
#1359=AXIS2_PLACEMENT_3D('',#1356,#1357,#1358);
#1361=CARTESIAN_POINT('',(-4.5E0,0.E0,-1.63E1));
#1362=CARTESIAN_POINT('',(4.5E0,0.E0,-1.63E1));
#1363=VERTEX_POINT('',#1361);
#1364=VERTEX_POINT('',#1362);
#1365=CARTESIAN_POINT('',(-4.5E0,0.E0,-1.69E1));
#1366=VERTEX_POINT('',#1365);
#1367=CARTESIAN_POINT('',(4.5E0,0.E0,-1.69E1));
#1368=VERTEX_POINT('',#1367);
#1369=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#1370=DIRECTION('',(0.E0,0.E0,-1.E0));
#1371=DIRECTION('',(-1.E0,0.E0,0.E0));
#1372=AXIS2_PLACEMENT_3D('',#1369,#1370,#1371);
#1373=CYLINDRICAL_SURFACE('',#1372,4.5E0);
#1375=ORIENTED_EDGE('',*,*,#1374,.F.);
#1377=ORIENTED_EDGE('',*,*,#1376,.F.);
#1379=ORIENTED_EDGE('',*,*,#1378,.F.);
#1381=ORIENTED_EDGE('',*,*,#1380,.T.);
#1382=EDGE_LOOP('',(#1375,#1377,#1379,#1381));
#1383=FACE_OUTER_BOUND('',#1382,.F.);
#1385=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#1386=DIRECTION('',(0.E0,0.E0,1.E0));
#1387=DIRECTION('',(1.E0,0.E0,0.E0));
#1388=AXIS2_PLACEMENT_3D('',#1385,#1386,#1387);
#1389=PLANE('',#1388);
#1390=ORIENTED_EDGE('',*,*,#1374,.T.);
#1392=ORIENTED_EDGE('',*,*,#1391,.T.);
#1393=EDGE_LOOP('',(#1390,#1392));
#1394=FACE_OUTER_BOUND('',#1393,.F.);
#1396=CARTESIAN_POINT('',(0.E0,0.E0,-1.63E1));
#1397=DIRECTION('',(0.E0,0.E0,-1.E0));
#1398=DIRECTION('',(-1.E0,0.E0,0.E0));
#1399=AXIS2_PLACEMENT_3D('',#1396,#1397,#1398);
#1400=CYLINDRICAL_SURFACE('',#1399,4.5E0);
#1401=ORIENTED_EDGE('',*,*,#1391,.F.);
#1402=ORIENTED_EDGE('',*,*,#1380,.F.);
#1404=ORIENTED_EDGE('',*,*,#1403,.F.);
#1405=ORIENTED_EDGE('',*,*,#1376,.T.);
#1406=EDGE_LOOP('',(#1401,#1402,#1404,#1405));
#1407=FACE_OUTER_BOUND('',#1406,.F.);
#1409=CARTESIAN_POINT('',(0.E0,0.E0,-1.69E1));
#1410=DIRECTION('',(0.E0,0.E0,1.E0));
#1411=DIRECTION('',(1.E0,0.E0,0.E0));
#1412=AXIS2_PLACEMENT_3D('',#1409,#1410,#1411);
#1413=PLANE('',#1412);
#1414=ORIENTED_EDGE('',*,*,#1403,.T.);
#1415=ORIENTED_EDGE('',*,*,#1378,.T.);
#1416=EDGE_LOOP('',(#1414,#1415));
#1417=FACE_OUTER_BOUND('',#1416,.F.);
#1419=CLOSED_SHELL('',(#1384,#1395,#1408,#1418));
#1420=MANIFOLD_SOLID_BREP('',#1419);
#1422=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1424=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1423);
#1425=(CONVERSION_BASED_UNIT('DEGREE',#1424)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1427=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.274588721917E-3),#1421,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1429=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1430=DIRECTION('',(0.E0,0.E0,1.E0));
#1431=DIRECTION('',(1.E0,0.E0,0.E0));
#1434=MECHANICAL_CONTEXT('',#281,'mechanical');
#1435=PRODUCT('MANIFOLD_SOLID_BREP_162','MANIFOLD_SOLID_BREP_162',
'NOT SPECIFIED',(#1434));
#1436=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1435,.MADE.);
#1442=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1443=DIRECTION('',(0.E0,0.E0,1.E0));
#1444=DIRECTION('',(1.E0,0.E0,0.E0));
#1445=AXIS2_PLACEMENT_3D('',#1442,#1443,#1444);
#1446=ITEM_DEFINED_TRANSFORMATION('','',#1432,#1445);
#1447=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1448=DIRECTION('',(0.E0,0.E0,1.E0));
#1449=DIRECTION('',(1.E0,0.E0,0.E0));
#1451=(REPRESENTATION_RELATIONSHIP('','',#1433,#292)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1446)SHAPE_REPRESENTATION_RELATIONSHIP());
#1452=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1451,#1441);
#1454=DIRECTION('',(0.E0,0.E0,-1.E0));
#1455=VECTOR('',#1454,1.5E0);
#1456=CARTESIAN_POINT('',(-2.55E0,0.E0,-1.69E1));
#1457=LINE('',#1456,#1455);
#1458=CARTESIAN_POINT('',(0.E0,0.E0,-1.69E1));
#1459=DIRECTION('',(0.E0,0.E0,-1.E0));
#1460=DIRECTION('',(1.E0,0.E0,0.E0));
#1461=AXIS2_PLACEMENT_3D('',#1458,#1459,#1460);
#1463=CARTESIAN_POINT('',(0.E0,0.E0,-1.69E1));
#1464=DIRECTION('',(0.E0,0.E0,-1.E0));
#1465=DIRECTION('',(-1.E0,0.E0,0.E0));
#1466=AXIS2_PLACEMENT_3D('',#1463,#1464,#1465);
#1468=DIRECTION('',(0.E0,0.E0,-1.E0));
#1469=VECTOR('',#1468,1.5E0);
#1470=CARTESIAN_POINT('',(2.55E0,0.E0,-1.69E1));
#1471=LINE('',#1470,#1469);
#1472=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1473=DIRECTION('',(0.E0,0.E0,1.E0));
#1474=DIRECTION('',(1.E0,0.E0,0.E0));
#1475=AXIS2_PLACEMENT_3D('',#1472,#1473,#1474);
#1477=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1478=DIRECTION('',(0.E0,0.E0,1.E0));
#1479=DIRECTION('',(-1.E0,0.E0,0.E0));
#1480=AXIS2_PLACEMENT_3D('',#1477,#1478,#1479);
#1482=CARTESIAN_POINT('',(-2.55E0,0.E0,-1.69E1));
#1483=CARTESIAN_POINT('',(2.55E0,0.E0,-1.69E1));
#1484=VERTEX_POINT('',#1482);
#1485=VERTEX_POINT('',#1483);
#1486=CARTESIAN_POINT('',(-2.55E0,0.E0,-1.84E1));
#1487=VERTEX_POINT('',#1486);
#1488=CARTESIAN_POINT('',(2.55E0,0.E0,-1.84E1));
#1489=VERTEX_POINT('',#1488);
#1490=CARTESIAN_POINT('',(0.E0,0.E0,-1.48E1));
#1491=DIRECTION('',(0.E0,0.E0,1.E0));
#1492=DIRECTION('',(1.E0,0.E0,0.E0));
#1493=AXIS2_PLACEMENT_3D('',#1490,#1491,#1492);
#1494=CYLINDRICAL_SURFACE('',#1493,2.55E0);
#1496=ORIENTED_EDGE('',*,*,#1495,.F.);
#1498=ORIENTED_EDGE('',*,*,#1497,.T.);
#1500=ORIENTED_EDGE('',*,*,#1499,.F.);
#1502=ORIENTED_EDGE('',*,*,#1501,.F.);
#1503=EDGE_LOOP('',(#1496,#1498,#1500,#1502));
#1504=FACE_OUTER_BOUND('',#1503,.F.);
#1506=CARTESIAN_POINT('',(0.E0,0.E0,-1.69E1));
#1507=DIRECTION('',(0.E0,0.E0,-1.E0));
#1508=DIRECTION('',(-1.E0,0.E0,0.E0));
#1509=AXIS2_PLACEMENT_3D('',#1506,#1507,#1508);
#1510=PLANE('',#1509);
#1512=ORIENTED_EDGE('',*,*,#1511,.T.);
#1513=ORIENTED_EDGE('',*,*,#1495,.T.);
#1514=EDGE_LOOP('',(#1512,#1513));
#1515=FACE_OUTER_BOUND('',#1514,.F.);
#1517=CARTESIAN_POINT('',(0.E0,0.E0,-1.48E1));
#1518=DIRECTION('',(0.E0,0.E0,1.E0));
#1519=DIRECTION('',(1.E0,0.E0,0.E0));
#1520=AXIS2_PLACEMENT_3D('',#1517,#1518,#1519);
#1521=CYLINDRICAL_SURFACE('',#1520,2.55E0);
#1522=ORIENTED_EDGE('',*,*,#1511,.F.);
#1523=ORIENTED_EDGE('',*,*,#1501,.T.);
#1525=ORIENTED_EDGE('',*,*,#1524,.F.);
#1526=ORIENTED_EDGE('',*,*,#1497,.F.);
#1527=EDGE_LOOP('',(#1522,#1523,#1525,#1526));
#1528=FACE_OUTER_BOUND('',#1527,.F.);
#1530=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1531=DIRECTION('',(0.E0,0.E0,-1.E0));
#1532=DIRECTION('',(-1.E0,0.E0,0.E0));
#1533=AXIS2_PLACEMENT_3D('',#1530,#1531,#1532);
#1534=PLANE('',#1533);
#1535=ORIENTED_EDGE('',*,*,#1499,.T.);
#1536=ORIENTED_EDGE('',*,*,#1524,.T.);
#1537=EDGE_LOOP('',(#1535,#1536));
#1538=FACE_OUTER_BOUND('',#1537,.F.);
#1540=CLOSED_SHELL('',(#1505,#1516,#1529,#1539));
#1541=MANIFOLD_SOLID_BREP('',#1540);
#1543=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1545=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1544);
#1546=(CONVERSION_BASED_UNIT('DEGREE',#1545)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1548=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(7.368937549407E-4),#1542,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1550=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1551=DIRECTION('',(0.E0,0.E0,1.E0));
#1552=DIRECTION('',(1.E0,0.E0,0.E0));
#1555=DESIGN_CONTEXT('',#281,'design');
#1556=MECHANICAL_CONTEXT('',#281,'mechanical');
#1557=PRODUCT('MANIFOLD_SOLID_BREP_163','MANIFOLD_SOLID_BREP_163',
'NOT SPECIFIED',(#1556));
#1558=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1557,.MADE.);
#1564=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1565=DIRECTION('',(0.E0,0.E0,1.E0));
#1566=DIRECTION('',(1.E0,0.E0,0.E0));
#1567=AXIS2_PLACEMENT_3D('',#1564,#1565,#1566);
#1568=ITEM_DEFINED_TRANSFORMATION('','',#1553,#1567);
#1569=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1570=DIRECTION('',(0.E0,0.E0,1.E0));
#1571=DIRECTION('',(1.E0,0.E0,0.E0));
#1573=(REPRESENTATION_RELATIONSHIP('','',#1554,#292)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1568)SHAPE_REPRESENTATION_RELATIONSHIP());
#1574=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1573,#1563);
#1576=DIRECTION('',(0.E0,0.E0,1.E0));
#1577=VECTOR('',#1576,8.E-1);
#1578=CARTESIAN_POINT('',(5.25E0,0.E0,-1.92E1));
#1579=LINE('',#1578,#1577);
#1580=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1581=DIRECTION('',(0.E0,0.E0,-1.E0));
#1582=DIRECTION('',(1.E0,0.E0,0.E0));
#1583=AXIS2_PLACEMENT_3D('',#1580,#1581,#1582);
#1585=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1586=DIRECTION('',(0.E0,0.E0,-1.E0));
#1587=DIRECTION('',(-1.E0,0.E0,0.E0));
#1588=AXIS2_PLACEMENT_3D('',#1585,#1586,#1587);
#1590=DIRECTION('',(0.E0,0.E0,1.E0));
#1591=VECTOR('',#1590,8.E-1);
#1592=CARTESIAN_POINT('',(-5.25E0,0.E0,-1.92E1));
#1593=LINE('',#1592,#1591);
#1594=CARTESIAN_POINT('',(0.E0,0.E0,-1.92E1));
#1595=DIRECTION('',(0.E0,0.E0,1.E0));
#1596=DIRECTION('',(1.E0,0.E0,0.E0));
#1597=AXIS2_PLACEMENT_3D('',#1594,#1595,#1596);
#1599=CARTESIAN_POINT('',(0.E0,0.E0,-1.92E1));
#1600=DIRECTION('',(0.E0,0.E0,1.E0));
#1601=DIRECTION('',(-1.E0,0.E0,0.E0));
#1602=AXIS2_PLACEMENT_3D('',#1599,#1600,#1601);
#1604=CARTESIAN_POINT('',(-5.25E0,0.E0,-1.84E1));
#1605=CARTESIAN_POINT('',(5.25E0,0.E0,-1.84E1));
#1606=VERTEX_POINT('',#1604);
#1607=VERTEX_POINT('',#1605);
#1608=CARTESIAN_POINT('',(-5.25E0,0.E0,-1.92E1));
#1609=VERTEX_POINT('',#1608);
#1610=CARTESIAN_POINT('',(5.25E0,0.E0,-1.92E1));
#1611=VERTEX_POINT('',#1610);
#1612=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1613=DIRECTION('',(0.E0,0.E0,-1.E0));
#1614=DIRECTION('',(-1.E0,0.E0,0.E0));
#1615=AXIS2_PLACEMENT_3D('',#1612,#1613,#1614);
#1616=CYLINDRICAL_SURFACE('',#1615,5.25E0);
#1618=ORIENTED_EDGE('',*,*,#1617,.F.);
#1620=ORIENTED_EDGE('',*,*,#1619,.F.);
#1622=ORIENTED_EDGE('',*,*,#1621,.F.);
#1624=ORIENTED_EDGE('',*,*,#1623,.T.);
#1625=EDGE_LOOP('',(#1618,#1620,#1622,#1624));
#1626=FACE_OUTER_BOUND('',#1625,.F.);
#1628=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1629=DIRECTION('',(0.E0,0.E0,-1.E0));
#1630=DIRECTION('',(-1.E0,0.E0,0.E0));
#1631=AXIS2_PLACEMENT_3D('',#1628,#1629,#1630);
#1632=PLANE('',#1631);
#1634=ORIENTED_EDGE('',*,*,#1633,.T.);
#1635=ORIENTED_EDGE('',*,*,#1617,.T.);
#1636=EDGE_LOOP('',(#1634,#1635));
#1637=FACE_OUTER_BOUND('',#1636,.F.);
#1639=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#1640=DIRECTION('',(0.E0,0.E0,-1.E0));
#1641=DIRECTION('',(-1.E0,0.E0,0.E0));
#1642=AXIS2_PLACEMENT_3D('',#1639,#1640,#1641);
#1643=CYLINDRICAL_SURFACE('',#1642,5.25E0);
#1644=ORIENTED_EDGE('',*,*,#1633,.F.);
#1645=ORIENTED_EDGE('',*,*,#1623,.F.);
#1647=ORIENTED_EDGE('',*,*,#1646,.F.);
#1648=ORIENTED_EDGE('',*,*,#1619,.T.);
#1649=EDGE_LOOP('',(#1644,#1645,#1647,#1648));
#1650=FACE_OUTER_BOUND('',#1649,.F.);
#1652=CARTESIAN_POINT('',(0.E0,0.E0,-1.92E1));
#1653=DIRECTION('',(0.E0,0.E0,-1.E0));
#1654=DIRECTION('',(-1.E0,0.E0,0.E0));
#1655=AXIS2_PLACEMENT_3D('',#1652,#1653,#1654);
#1656=PLANE('',#1655);
#1657=ORIENTED_EDGE('',*,*,#1621,.T.);
#1658=ORIENTED_EDGE('',*,*,#1646,.T.);
#1659=EDGE_LOOP('',(#1657,#1658));
#1660=FACE_OUTER_BOUND('',#1659,.F.);
#1662=CLOSED_SHELL('',(#1627,#1638,#1651,#1661));
#1663=MANIFOLD_SOLID_BREP('',#1662);
#1665=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1667=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1666);
#1668=(CONVERSION_BASED_UNIT('DEGREE',#1667)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1670=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.487524428316E-3),#1664,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1672=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1673=DIRECTION('',(0.E0,0.E0,1.E0));
#1674=DIRECTION('',(1.E0,0.E0,0.E0));
#1677=MECHANICAL_CONTEXT('',#281,'mechanical');
#1678=PRODUCT('MANIFOLD_SOLID_BREP_164','MANIFOLD_SOLID_BREP_164',
'NOT SPECIFIED',(#1677));
#1679=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1678,.MADE.);
#1685=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1686=DIRECTION('',(0.E0,0.E0,1.E0));
#1687=DIRECTION('',(1.E0,0.E0,0.E0));
#1688=AXIS2_PLACEMENT_3D('',#1685,#1686,#1687);
#1689=ITEM_DEFINED_TRANSFORMATION('','',#1675,#1688);
#1690=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1691=DIRECTION('',(0.E0,0.E0,1.E0));
#1692=DIRECTION('',(1.E0,0.E0,0.E0));
#1694=(REPRESENTATION_RELATIONSHIP('','',#1676,#292)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1689)SHAPE_REPRESENTATION_RELATIONSHIP());
#1695=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1694,#1684);
#1697=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#1699=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#1698);
#1700=(CONVERSION_BASED_UNIT('DEGREE',#1699)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#1702=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.564100453683E-3),#1696,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#1704=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1705=DIRECTION('',(0.E0,0.E0,1.E0));
#1706=DIRECTION('',(1.E0,0.E0,0.E0));
#1708=DESIGN_CONTEXT('',#281,'design');
#1709=MECHANICAL_CONTEXT('',#281,'mechanical');
#1710=PRODUCT('0000001-20_ASM_ASM','0000001-20_ASM_ASM','NOT SPECIFIED',
(#1709));
#1711=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#1710,.MADE.);
#1718=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1719=DIRECTION('',(0.E0,0.E0,1.E0));
#1720=DIRECTION('',(1.E0,0.E0,0.E0));
#1721=AXIS2_PLACEMENT_3D('',#1718,#1719,#1720);
#1722=ITEM_DEFINED_TRANSFORMATION('','',#303,#1721);
#1723=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1724=DIRECTION('',(0.E0,0.E0,1.E0));
#1725=DIRECTION('',(1.E0,0.E0,0.E0));
#1727=(REPRESENTATION_RELATIONSHIP('','',#292,#1715)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#1722)SHAPE_REPRESENTATION_RELATIONSHIP());
#1728=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#1727,#1717);
#1730=CARTESIAN_POINT('',(0.E0,-2.728928194529E-13,2.562825840987E-13));
#1731=DIRECTION('',(0.E0,-1.E0,-2.375342689269E-13));
#1732=DIRECTION('',(-1.E0,0.E0,-4.647436879258E-14));
#1733=AXIS2_PLACEMENT_3D('',#1730,#1731,#1732);
#1735=CARTESIAN_POINT('',(2.5E0,-2.729430182200E-13,3.981829644336E-13));
#1736=DIRECTION('',(5.676015213396E-14,2.375342689269E-13,-1.E0));
#1737=DIRECTION('',(1.E0,0.E0,5.676015213396E-14));
#1738=AXIS2_PLACEMENT_3D('',#1735,#1736,#1737);
#1740=CARTESIAN_POINT('',(2.5E0,-3.E0,-1.633835706017E-14));
#1741=CARTESIAN_POINT('',(2.5E0,-3.E0,-1.260823164453E-1));
#1742=CARTESIAN_POINT('',(2.500000063669E0,-3.000084377344E0,
-3.777376870173E-1));
#1743=CARTESIAN_POINT('',(2.499999777159E0,-2.998905742590E0,
-7.509297388023E-1));
#1744=CARTESIAN_POINT('',(2.500000827696E0,-2.992069792342E0,
-1.128129414459E0));
#1745=CARTESIAN_POINT('',(2.499998217271E0,-2.979989140254E0,
-1.376322951713E0));
#1746=CARTESIAN_POINT('',(2.499998217271E0,-2.971090610577E0,
-1.500003721701E0));
#1748=CARTESIAN_POINT('',(2.499998217271E0,-2.971090610577E0,
-1.500003721701E0));
#1749=CARTESIAN_POINT('',(2.441854117349E0,-2.978062754006E0,
-1.500003721701E0));
#1750=CARTESIAN_POINT('',(2.327247696465E0,-2.989122768575E0,
-1.499997505566E0));
#1751=CARTESIAN_POINT('',(2.160289318847E0,-2.998218879628E0,
-1.500003147967E0));
#1752=CARTESIAN_POINT('',(2.052811555100E0,-3.000000390096E0,
-1.499994317699E0));
#1753=CARTESIAN_POINT('',(1.999992720549E0,-2.999999999957E0,
-1.499994317699E0));
#1755=CARTESIAN_POINT('',(-1.999992720549E0,-2.999999999957E0,
-1.499994317699E0));
#1756=CARTESIAN_POINT('',(-2.052903612261E0,-3.000000390776E0,
-1.499994317699E0));
#1757=CARTESIAN_POINT('',(-2.160501466318E0,-2.998210310191E0,
-1.500003147967E0));
#1758=CARTESIAN_POINT('',(-2.327229421007E0,-2.989121846492E0,
-1.499997505566E0));
#1759=CARTESIAN_POINT('',(-2.441845318958E0,-2.978063809035E0,
-1.500003721701E0));
#1760=CARTESIAN_POINT('',(-2.499998217271E0,-2.971090610577E0,
-1.500003721701E0));
#1762=CARTESIAN_POINT('',(-2.499998217271E0,-2.971090610577E0,
-1.500003721701E0));
#1763=CARTESIAN_POINT('',(-2.499998217271E0,-2.980001489427E0,
-1.376151310417E0));
#1764=CARTESIAN_POINT('',(-2.500000827696E0,-2.992079922422E0,
-1.127798123164E0));
#1765=CARTESIAN_POINT('',(-2.499999777159E0,-2.998903361166E0,
-7.508037865012E-1));
#1766=CARTESIAN_POINT('',(-2.500000063669E0,-3.000083687499E0,
-3.785961015092E-1));
#1767=CARTESIAN_POINT('',(-2.5E0,-3.E0,-1.264653369345E-1));
#1768=CARTESIAN_POINT('',(-2.5E0,-3.E0,2.001219513777E-14));
#1770=DIRECTION('',(2.664535259100E-14,-1.E0,0.E0));
#1771=VECTOR('',#1770,3.5E0);
#1772=CARTESIAN_POINT('',(-5.5E0,-1.759283117902E-14,2.523994767191E-14));
#1773=LINE('',#1772,#1771);
#1774=DIRECTION('',(-2.385393470052E-14,-1.E0,-1.751435142730E-14));
#1775=VECTOR('',#1774,3.5E0);
#1776=CARTESIAN_POINT('',(5.5E0,-1.342366002345E-13,4.017890321617E-14));
#1777=LINE('',#1776,#1775);
#1778=CARTESIAN_POINT('',(-2.5E0,-2.714702961563E-13,-3.997809917074E-13));
#1779=DIRECTION('',(-5.645484080219E-14,2.383958107819E-13,1.E0));
#1780=DIRECTION('',(-1.E0,8.159941335453E-14,-5.645484080221E-14));
#1781=AXIS2_PLACEMENT_3D('',#1778,#1779,#1780);
#1783=CARTESIAN_POINT('',(-2.5E0,-3.E0,2.001219513777E-14));
#1784=CARTESIAN_POINT('',(-2.5E0,-3.E0,1.260823164454E-1));
#1785=CARTESIAN_POINT('',(-2.500000063669E0,-3.000084377344E0,
3.777376870174E-1));
#1786=CARTESIAN_POINT('',(-2.499999777159E0,-2.998905742590E0,
7.509297388024E-1));
#1787=CARTESIAN_POINT('',(-2.500000827696E0,-2.992069792342E0,
1.128129414459E0));
#1788=CARTESIAN_POINT('',(-2.499998217271E0,-2.979989140254E0,
1.376322951713E0));
#1789=CARTESIAN_POINT('',(-2.499998217271E0,-2.971090610577E0,
1.500003721701E0));
#1791=CARTESIAN_POINT('',(-2.499998217271E0,-2.971090610577E0,
1.500003721701E0));
#1792=CARTESIAN_POINT('',(-2.441854117349E0,-2.978062754006E0,
1.500003721701E0));
#1793=CARTESIAN_POINT('',(-2.327247696464E0,-2.989122768575E0,
1.499997505566E0));
#1794=CARTESIAN_POINT('',(-2.160289318847E0,-2.998218879628E0,
1.500003147967E0));
#1795=CARTESIAN_POINT('',(-2.052811555100E0,-3.000000390096E0,
1.499994317699E0));
#1796=CARTESIAN_POINT('',(-1.999992720549E0,-2.999999999957E0,
1.499994317699E0));
#1798=CARTESIAN_POINT('',(1.999992720549E0,-2.999999999957E0,1.499994317699E0));
#1799=CARTESIAN_POINT('',(2.052903612261E0,-3.000000390776E0,1.499994317699E0));
#1800=CARTESIAN_POINT('',(2.160501466317E0,-2.998210310191E0,1.500003147967E0));
#1801=CARTESIAN_POINT('',(2.327229421006E0,-2.989121846492E0,1.499997505566E0));
#1802=CARTESIAN_POINT('',(2.441845318958E0,-2.978063809034E0,1.500003721701E0));
#1803=CARTESIAN_POINT('',(2.499998217271E0,-2.971090610577E0,1.500003721701E0));
#1805=CARTESIAN_POINT('',(2.499998217271E0,-2.971090610577E0,1.500003721701E0));
#1806=CARTESIAN_POINT('',(2.499998217271E0,-2.980001489427E0,1.376151310417E0));
#1807=CARTESIAN_POINT('',(2.500000827696E0,-2.992079922422E0,1.127798123163E0));
#1808=CARTESIAN_POINT('',(2.499999777159E0,-2.998903361166E0,
7.508037865012E-1));
#1809=CARTESIAN_POINT('',(2.500000063669E0,-3.000083687499E0,
3.785961015094E-1));
#1810=CARTESIAN_POINT('',(2.5E0,-3.E0,1.264653369346E-1));
#1811=CARTESIAN_POINT('',(2.5E0,-3.E0,-1.633835706017E-14));
#1813=CARTESIAN_POINT('',(0.E0,-2.691180611691E-13,-2.586438897019E-13));
#1814=DIRECTION('',(0.E0,-1.E0,2.383958107819E-13));
#1815=DIRECTION('',(1.E0,0.E0,4.702616176400E-14));
#1816=AXIS2_PLACEMENT_3D('',#1813,#1814,#1815);
#1818=DIRECTION('',(-7.049400419777E-7,-9.999999999987E-1,1.471662433655E-6));
#1819=VECTOR('',#1818,2.528909389426E0);
#1820=CARTESIAN_POINT('',(-2.499998217271E0,-2.971090610577E0,
-1.500003721701E0));
#1821=LINE('',#1820,#1819);
#1822=DIRECTION('',(7.049400268755E-7,-9.999999999987E-1,1.471662442874E-6));
#1823=VECTOR('',#1822,2.528909389427E0);
#1824=CARTESIAN_POINT('',(2.499998217271E0,-2.971090610577E0,
-1.500003721701E0));
#1825=LINE('',#1824,#1823);
#1826=DIRECTION('',(-1.E0,0.E0,0.E0));
#1827=VECTOR('',#1826,3.999985441098E0);
#1828=CARTESIAN_POINT('',(1.999992720549E0,-2.999999999957E0,
-1.499994317699E0));
#1829=LINE('',#1828,#1827);
#1830=CARTESIAN_POINT('',(0.E0,-2.999999999992E0,-4.563202226801E-13));
#1831=DIRECTION('',(0.E0,-1.E0,-2.375342689269E-13));
#1832=DIRECTION('',(-8.000000000001E-1,1.424642076284E-13,-5.999999999999E-1));
#1833=AXIS2_PLACEMENT_3D('',#1830,#1831,#1832);
#1835=DIRECTION('',(7.049400270511E-7,-9.999999999987E-1,-1.471662442874E-6));
#1836=VECTOR('',#1835,2.528909389427E0);
#1837=CARTESIAN_POINT('',(2.499998217271E0,-2.971090610577E0,1.500003721701E0));
#1838=LINE('',#1837,#1836);
#1839=DIRECTION('',(-7.049400270511E-7,-9.999999999987E-1,-1.471662442874E-6));
#1840=VECTOR('',#1839,2.528909389427E0);
#1841=CARTESIAN_POINT('',(-2.499998217271E0,-2.971090610577E0,
1.500003721701E0));
#1842=LINE('',#1841,#1840);
#1843=DIRECTION('',(1.E0,0.E0,0.E0));
#1844=VECTOR('',#1843,3.999985441098E0);
#1845=CARTESIAN_POINT('',(-1.999992720549E0,-2.999999999957E0,
1.499994317699E0));
#1846=LINE('',#1845,#1844);
#1847=CARTESIAN_POINT('',(0.E0,-2.999999999992E0,4.565435426417E-13));
#1848=DIRECTION('',(0.E0,-1.E0,2.383958107819E-13));
#1849=DIRECTION('',(8.000000000001E-1,1.437076608122E-13,5.999999999999E-1));
#1850=AXIS2_PLACEMENT_3D('',#1847,#1848,#1849);
#1852=CARTESIAN_POINT('',(1.222018468595E-14,-5.5E0,0.E0));
#1853=DIRECTION('',(0.E0,1.E0,0.E0));
#1854=DIRECTION('',(1.E0,0.E0,0.E0));
#1855=AXIS2_PLACEMENT_3D('',#1852,#1853,#1854);
#1857=CARTESIAN_POINT('',(1.222018468595E-14,-5.5E0,0.E0));
#1858=DIRECTION('',(0.E0,1.E0,0.E0));
#1859=DIRECTION('',(-5.329387100212E-1,0.E0,-8.461538461538E-1));
#1860=AXIS2_PLACEMENT_3D('',#1857,#1858,#1859);
#1862=CARTESIAN_POINT('',(1.222018468595E-14,-5.5E0,0.E0));
#1863=DIRECTION('',(0.E0,1.E0,0.E0));
#1864=DIRECTION('',(-1.E0,0.E0,0.E0));
#1865=AXIS2_PLACEMENT_3D('',#1862,#1863,#1864);
#1867=CARTESIAN_POINT('',(1.222018468595E-14,-5.5E0,0.E0));
#1868=DIRECTION('',(0.E0,1.E0,0.E0));
#1869=DIRECTION('',(5.329387100212E-1,0.E0,8.461538461538E-1));
#1870=AXIS2_PLACEMENT_3D('',#1867,#1868,#1869);
#1872=DIRECTION('',(0.E0,0.E0,-1.E0));
#1873=VECTOR('',#1872,3.E0);
#1874=CARTESIAN_POINT('',(-2.5E0,-5.5E0,1.5E0));
#1875=LINE('',#1874,#1873);
#1876=DIRECTION('',(1.E0,0.E0,0.E0));
#1877=VECTOR('',#1876,5.E0);
#1878=CARTESIAN_POINT('',(-2.5E0,-5.5E0,-1.5E0));
#1879=LINE('',#1878,#1877);
#1880=DIRECTION('',(0.E0,0.E0,1.E0));
#1881=VECTOR('',#1880,3.E0);
#1882=CARTESIAN_POINT('',(2.5E0,-5.5E0,-1.5E0));
#1883=LINE('',#1882,#1881);
#1884=DIRECTION('',(-1.E0,0.E0,0.E0));
#1885=VECTOR('',#1884,5.E0);
#1886=CARTESIAN_POINT('',(2.5E0,-5.5E0,1.5E0));
#1887=LINE('',#1886,#1885);
#1888=DIRECTION('',(0.E0,-1.E0,0.E0));
#1889=VECTOR('',#1888,2.E0);
#1890=CARTESIAN_POINT('',(3.464101615138E0,-3.5E0,-5.5E0));
#1891=LINE('',#1890,#1889);
#1892=CARTESIAN_POINT('',(0.E0,-3.5E0,0.E0));
#1893=DIRECTION('',(0.E0,1.E0,0.E0));
#1894=DIRECTION('',(0.E0,0.E0,1.E0));
#1895=AXIS2_PLACEMENT_3D('',#1892,#1893,#1894);
#1897=CARTESIAN_POINT('',(0.E0,-3.5E0,0.E0));
#1898=DIRECTION('',(0.E0,1.E0,0.E0));
#1899=DIRECTION('',(1.E0,0.E0,-1.127579433802E-14));
#1900=AXIS2_PLACEMENT_3D('',#1897,#1898,#1899);
#1902=DIRECTION('',(1.E0,0.E0,1.025580099405E-14));
#1903=VECTOR('',#1902,3.464101615138E0);
#1904=CARTESIAN_POINT('',(-3.591985331433E-14,-3.5E0,-5.5E0));
#1905=LINE('',#1904,#1903);
#1906=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#1907=DIRECTION('',(0.E0,-1.E0,0.E0));
#1908=DIRECTION('',(5.329387100212E-1,0.E0,-8.461538461538E-1));
#1909=AXIS2_PLACEMENT_3D('',#1906,#1907,#1908);
#1911=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#1912=DIRECTION('',(0.E0,-1.E0,0.E0));
#1913=DIRECTION('',(1.E0,0.E0,0.E0));
#1914=AXIS2_PLACEMENT_3D('',#1911,#1912,#1913);
#1916=DIRECTION('',(-1.E0,0.E0,1.025580099405E-14));
#1917=VECTOR('',#1916,3.464101615138E0);
#1918=CARTESIAN_POINT('',(3.464101615138E0,-3.5E0,5.5E0));
#1919=LINE('',#1918,#1917);
#1920=DIRECTION('',(1.E0,0.E0,0.E0));
#1921=VECTOR('',#1920,6.928203230276E0);
#1922=CARTESIAN_POINT('',(-3.464101615138E0,-5.5E0,-5.5E0));
#1923=LINE('',#1922,#1921);
#1924=CARTESIAN_POINT('',(0.E0,-3.5E0,0.E0));
#1925=DIRECTION('',(0.E0,1.E0,0.E0));
#1926=DIRECTION('',(0.E0,0.E0,-1.E0));
#1927=AXIS2_PLACEMENT_3D('',#1924,#1925,#1926);
#1929=CARTESIAN_POINT('',(0.E0,-3.5E0,0.E0));
#1930=DIRECTION('',(0.E0,1.E0,0.E0));
#1931=DIRECTION('',(-1.E0,0.E0,1.121456153299E-14));
#1932=AXIS2_PLACEMENT_3D('',#1929,#1930,#1931);
#1934=DIRECTION('',(-1.E0,0.E0,-1.128138109345E-14));
#1935=VECTOR('',#1934,3.464101615138E0);
#1936=CARTESIAN_POINT('',(5.679606662997E-14,-3.5E0,5.5E0));
#1937=LINE('',#1936,#1935);
#1938=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#1939=DIRECTION('',(0.E0,-1.E0,0.E0));
#1940=DIRECTION('',(-5.329387100212E-1,0.E0,8.461538461538E-1));
#1941=AXIS2_PLACEMENT_3D('',#1938,#1939,#1940);
#1943=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#1944=DIRECTION('',(0.E0,-1.E0,0.E0));
#1945=DIRECTION('',(-1.E0,0.E0,0.E0));
#1946=AXIS2_PLACEMENT_3D('',#1943,#1944,#1945);
#1948=DIRECTION('',(1.E0,0.E0,-1.128138109345E-14));
#1949=VECTOR('',#1948,3.464101615138E0);
#1950=CARTESIAN_POINT('',(-3.464101615138E0,-3.5E0,-5.5E0));
#1951=LINE('',#1950,#1949);
#1952=DIRECTION('',(-1.E0,0.E0,0.E0));
#1953=VECTOR('',#1952,6.928203230276E0);
#1954=CARTESIAN_POINT('',(3.464101615138E0,-5.5E0,5.5E0));
#1955=LINE('',#1954,#1953);
#1956=DIRECTION('',(0.E0,-1.E0,0.E0));
#1957=VECTOR('',#1956,2.E0);
#1958=CARTESIAN_POINT('',(6.5E0,-3.5E0,0.E0));
#1959=LINE('',#1958,#1957);
#1960=DIRECTION('',(0.E0,1.E0,0.E0));
#1961=VECTOR('',#1960,2.E0);
#1962=CARTESIAN_POINT('',(3.464101615138E0,-5.5E0,5.5E0));
#1963=LINE('',#1962,#1961);
#1964=DIRECTION('',(0.E0,1.E0,0.E0));
#1965=VECTOR('',#1964,2.E0);
#1966=CARTESIAN_POINT('',(-3.464101615138E0,-5.5E0,-5.5E0));
#1967=LINE('',#1966,#1965);
#1968=DIRECTION('',(0.E0,-1.E0,0.E0));
#1969=VECTOR('',#1968,2.E0);
#1970=CARTESIAN_POINT('',(-3.464101615138E0,-3.5E0,5.5E0));
#1971=LINE('',#1970,#1969);
#1972=CARTESIAN_POINT('',(-5.5E0,-2.728104727053E-13,0.E0));
#1973=CARTESIAN_POINT('',(5.5E0,-2.729751662003E-13,0.E0));
#1974=VERTEX_POINT('',#1972);
#1975=VERTEX_POINT('',#1973);
#1976=CARTESIAN_POINT('',(2.5E0,-3.E0,-3.144198423471E-13));
#1977=VERTEX_POINT('',#1976);
#1978=VERTEX_POINT('',#1746);
#1979=VERTEX_POINT('',#1753);
#1980=CARTESIAN_POINT('',(-1.999994537456E0,-2.999999999992E0,
-1.499995903092E0));
#1981=VERTEX_POINT('',#1980);
#1982=VERTEX_POINT('',#1760);
#1983=VERTEX_POINT('',#1768);
#1984=CARTESIAN_POINT('',(-5.5E0,-3.5E0,2.100906663683E-14));
#1985=VERTEX_POINT('',#1984);
#1986=CARTESIAN_POINT('',(1.188340681618E-14,-3.5E0,-5.5E0));
#1987=VERTEX_POINT('',#1986);
#1988=CARTESIAN_POINT('',(5.5E0,-3.5E0,-6.201686885909E-14));
#1989=VERTEX_POINT('',#1988);
#1990=CARTESIAN_POINT('',(1.255696255572E-14,-3.5E0,5.5E0));
#1991=VERTEX_POINT('',#1990);
#1992=VERTEX_POINT('',#1789);
#1993=VERTEX_POINT('',#1796);
#1994=CARTESIAN_POINT('',(1.999994537456E0,-2.999999999992E0,1.499995903092E0));
#1995=VERTEX_POINT('',#1994);
#1996=VERTEX_POINT('',#1803);
#1997=CARTESIAN_POINT('',(-2.5E0,-5.5E0,-1.5E0));
#1998=VERTEX_POINT('',#1997);
#1999=CARTESIAN_POINT('',(-2.5E0,-5.5E0,1.5E0));
#2000=VERTEX_POINT('',#1999);
#2001=CARTESIAN_POINT('',(2.5E0,-5.5E0,-1.5E0));
#2002=VERTEX_POINT('',#2001);
#2003=CARTESIAN_POINT('',(2.5E0,-5.5E0,1.5E0));
#2004=VERTEX_POINT('',#2003);
#2005=CARTESIAN_POINT('',(6.5E0,-5.5E0,0.E0));
#2006=CARTESIAN_POINT('',(3.464101615138E0,-5.5E0,-5.5E0));
#2007=VERTEX_POINT('',#2005);
#2008=VERTEX_POINT('',#2006);
#2009=CARTESIAN_POINT('',(-3.464101615138E0,-5.5E0,-5.5E0));
#2010=VERTEX_POINT('',#2009);
#2011=CARTESIAN_POINT('',(-6.5E0,-5.5E0,0.E0));
#2012=VERTEX_POINT('',#2011);
#2013=CARTESIAN_POINT('',(-3.464101615138E0,-5.5E0,5.5E0));
#2014=VERTEX_POINT('',#2013);
#2015=CARTESIAN_POINT('',(3.464101615138E0,-5.5E0,5.5E0));
#2016=VERTEX_POINT('',#2015);
#2017=CARTESIAN_POINT('',(3.464101615138E0,-3.5E0,-5.5E0));
#2018=CARTESIAN_POINT('',(6.5E0,-3.5E0,0.E0));
#2019=VERTEX_POINT('',#2017);
#2020=VERTEX_POINT('',#2018);
#2021=CARTESIAN_POINT('',(3.464101615138E0,-3.5E0,5.5E0));
#2022=VERTEX_POINT('',#2021);
#2023=CARTESIAN_POINT('',(-3.464101615138E0,-3.5E0,-5.5E0));
#2024=VERTEX_POINT('',#2023);
#2025=CARTESIAN_POINT('',(-3.464101615138E0,-3.5E0,5.5E0));
#2026=VERTEX_POINT('',#2025);
#2027=CARTESIAN_POINT('',(-6.5E0,-3.5E0,0.E0));
#2028=VERTEX_POINT('',#2027);
#2029=CARTESIAN_POINT('',(-5.487669591157E0,9.423283093742E-2,
3.452549063270E-1));
#2030=CARTESIAN_POINT('',(-5.545546343575E0,-1.751065735776E0,
3.488962029466E-1));
#2031=CARTESIAN_POINT('',(-4.242649063635E0,-3.056527015829E0,
2.669248541129E-1));
#2032=CARTESIAN_POINT('',(-2.400992306576E0,-2.998518793522E0,
1.510576320468E-1));
#2033=CARTESIAN_POINT('',(-5.700138976221E0,9.423283093823E-2,
-3.031849262504E0));
#2034=CARTESIAN_POINT('',(-5.760256577471E0,-1.751065735775E0,
-3.063825238139E0));
#2035=CARTESIAN_POINT('',(-4.406914244440E0,-3.056527015828E0,
-2.343995428474E0));
#2036=CARTESIAN_POINT('',(-2.493952961449E0,-2.998518793522E0,
-1.326509665543E0));
#2037=CARTESIAN_POINT('',(-3.383781288252E0,9.423283093881E-2,
-5.498519663696E0));
#2038=CARTESIAN_POINT('',(-3.419468982018E0,-1.751065735774E0,
-5.556510848471E0));
#2039=CARTESIAN_POINT('',(-2.616082523861E0,-3.056527015828E0,
-4.251037515114E0));
#2040=CARTESIAN_POINT('',(-1.480488703861E0,-2.998518793522E0,
-2.405739483909E0));
#2041=CARTESIAN_POINT('',(-5.465946146178E-14,9.423283093881E-2,
-5.498519663696E0));
#2042=CARTESIAN_POINT('',(-5.501736705193E-14,-1.751065735774E0,
-5.556510848471E0));
#2043=CARTESIAN_POINT('',(-4.226039428151E-14,-3.056527015828E0,
-4.251037515114E0));
#2044=CARTESIAN_POINT('',(-2.323719354546E-14,-2.998518793522E0,
-2.405739483909E0));
#2045=CARTESIAN_POINT('',(3.383781288252E0,9.423283093881E-2,
-5.498519663696E0));
#2046=CARTESIAN_POINT('',(3.419468982018E0,-1.751065735774E0,
-5.556510848471E0));
#2047=CARTESIAN_POINT('',(2.616082523861E0,-3.056527015828E0,
-4.251037515114E0));
#2048=CARTESIAN_POINT('',(1.480488703861E0,-2.998518793522E0,
-2.405739483909E0));
#2049=CARTESIAN_POINT('',(5.700138976221E0,9.423283093822E-2,
-3.031849262504E0));
#2050=CARTESIAN_POINT('',(5.760256577471E0,-1.751065735775E0,
-3.063825238139E0));
#2051=CARTESIAN_POINT('',(4.406914244440E0,-3.056527015828E0,
-2.343995428474E0));
#2052=CARTESIAN_POINT('',(2.493952961449E0,-2.998518793522E0,
-1.326509665543E0));
#2053=CARTESIAN_POINT('',(5.487669591157E0,9.423283093742E-2,
3.452549063269E-1));
#2054=CARTESIAN_POINT('',(5.545546343575E0,-1.751065735776E0,
3.488962029465E-1));
#2055=CARTESIAN_POINT('',(4.242649063635E0,-3.056527015829E0,
2.669248541128E-1));
#2056=CARTESIAN_POINT('',(2.400992306576E0,-2.998518793522E0,
1.510576320468E-1));
#2057=(BOUNDED_SURFACE()B_SPLINE_SURFACE(3,3,((#2029,#2030,#2031,#2032),(#2033,
#2034,#2035,#2036),(#2037,#2038,#2039,#2040),(#2041,#2042,#2043,#2044),(#2045,
#2046,#2047,#2048),(#2049,#2050,#2051,#2052),(#2053,#2054,#2055,#2056)),
.UNSPECIFIED.,.F.,.F.,.F.)B_SPLINE_SURFACE_WITH_KNOTS((4,3,4),(4,4),(0.E0,1.E0,
2.E0),(0.E0,1.E0),.UNSPECIFIED.)GEOMETRIC_REPRESENTATION_ITEM()RATIONAL_B_SPLINE_SURFACE(((1.409595724601E0,1.113151735125E0,1.113151735125E0,1.409595724601E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.409595724601E0,1.113151735125E0,1.113151735125E0,1.409595724601E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.409595724601E0,1.113151735125E0,1.113151735125E0,1.409595724601E0)))REPRESENTATION_ITEM('')SURFACE());
#2059=ORIENTED_EDGE('',*,*,#2058,.T.);
#2061=ORIENTED_EDGE('',*,*,#2060,.T.);
#2063=ORIENTED_EDGE('',*,*,#2062,.T.);
#2065=ORIENTED_EDGE('',*,*,#2064,.T.);
#2067=ORIENTED_EDGE('',*,*,#2066,.F.);
#2069=ORIENTED_EDGE('',*,*,#2068,.T.);
#2071=ORIENTED_EDGE('',*,*,#2070,.T.);
#2073=ORIENTED_EDGE('',*,*,#2072,.F.);
#2074=EDGE_LOOP('',(#2059,#2061,#2063,#2065,#2067,#2069,#2071,#2073));
#2075=FACE_OUTER_BOUND('',#2074,.F.);
#2077=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2078=DIRECTION('',(0.E0,-1.E0,0.E0));
#2079=DIRECTION('',(1.E0,0.E0,0.E0));
#2080=AXIS2_PLACEMENT_3D('',#2077,#2078,#2079);
#2081=CYLINDRICAL_SURFACE('',#2080,5.5E0);
#2083=ORIENTED_EDGE('',*,*,#2082,.T.);
#2085=ORIENTED_EDGE('',*,*,#2084,.F.);
#2087=ORIENTED_EDGE('',*,*,#2086,.F.);
#2089=ORIENTED_EDGE('',*,*,#2088,.F.);
#2090=ORIENTED_EDGE('',*,*,#2058,.F.);
#2091=EDGE_LOOP('',(#2083,#2085,#2087,#2089,#2090));
#2092=FACE_OUTER_BOUND('',#2091,.F.);
#2094=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2095=DIRECTION('',(0.E0,-1.E0,0.E0));
#2096=DIRECTION('',(1.E0,0.E0,0.E0));
#2097=AXIS2_PLACEMENT_3D('',#2094,#2095,#2096);
#2098=CYLINDRICAL_SURFACE('',#2097,5.5E0);
#2100=ORIENTED_EDGE('',*,*,#2099,.F.);
#2101=ORIENTED_EDGE('',*,*,#2088,.T.);
#2103=ORIENTED_EDGE('',*,*,#2102,.F.);
#2105=ORIENTED_EDGE('',*,*,#2104,.F.);
#2106=ORIENTED_EDGE('',*,*,#2082,.F.);
#2107=EDGE_LOOP('',(#2100,#2101,#2103,#2105,#2106));
#2108=FACE_OUTER_BOUND('',#2107,.F.);
#2110=CARTESIAN_POINT('',(5.487669591157E0,9.423283093745E-2,
-3.452549063270E-1));
#2111=CARTESIAN_POINT('',(5.545546343575E0,-1.751065735776E0,
-3.488962029466E-1));
#2112=CARTESIAN_POINT('',(4.242649063635E0,-3.056527015829E0,
-2.669248541129E-1));
#2113=CARTESIAN_POINT('',(2.400992306576E0,-2.998518793522E0,
-1.510576320468E-1));
#2114=CARTESIAN_POINT('',(5.700138976221E0,9.423283093825E-2,3.031849262504E0));
#2115=CARTESIAN_POINT('',(5.760256577471E0,-1.751065735775E0,3.063825238139E0));
#2116=CARTESIAN_POINT('',(4.406914244440E0,-3.056527015828E0,2.343995428474E0));
#2117=CARTESIAN_POINT('',(2.493952961449E0,-2.998518793522E0,1.326509665543E0));
#2118=CARTESIAN_POINT('',(3.383781288252E0,9.423283093884E-2,5.498519663696E0));
#2119=CARTESIAN_POINT('',(3.419468982018E0,-1.751065735774E0,5.556510848471E0));
#2120=CARTESIAN_POINT('',(2.616082523861E0,-3.056527015828E0,4.251037515114E0));
#2121=CARTESIAN_POINT('',(1.480488703861E0,-2.998518793522E0,2.405739483909E0));
#2122=CARTESIAN_POINT('',(6.362353930233E-14,9.423283093884E-2,
5.498519663696E0));
#2123=CARTESIAN_POINT('',(6.524507439279E-14,-1.751065735774E0,
5.556510848471E0));
#2124=CARTESIAN_POINT('',(5.135671117144E-14,-3.056527015828E0,
4.251037515114E0));
#2125=CARTESIAN_POINT('',(2.822626158027E-14,-2.998518793522E0,
2.405739483909E0));
#2126=CARTESIAN_POINT('',(-3.383781288252E0,9.423283093884E-2,
5.498519663696E0));
#2127=CARTESIAN_POINT('',(-3.419468982018E0,-1.751065735774E0,
5.556510848471E0));
#2128=CARTESIAN_POINT('',(-2.616082523861E0,-3.056527015828E0,
4.251037515114E0));
#2129=CARTESIAN_POINT('',(-1.480488703861E0,-2.998518793522E0,
2.405739483909E0));
#2130=CARTESIAN_POINT('',(-5.700138976221E0,9.423283093824E-2,
3.031849262504E0));
#2131=CARTESIAN_POINT('',(-5.760256577471E0,-1.751065735775E0,
3.063825238139E0));
#2132=CARTESIAN_POINT('',(-4.406914244440E0,-3.056527015828E0,
2.343995428474E0));
#2133=CARTESIAN_POINT('',(-2.493952961449E0,-2.998518793522E0,
1.326509665543E0));
#2134=CARTESIAN_POINT('',(-5.487669591157E0,9.423283093744E-2,
-3.452549063268E-1));
#2135=CARTESIAN_POINT('',(-5.545546343575E0,-1.751065735776E0,
-3.488962029465E-1));
#2136=CARTESIAN_POINT('',(-4.242649063635E0,-3.056527015829E0,
-2.669248541128E-1));
#2137=CARTESIAN_POINT('',(-2.400992306576E0,-2.998518793522E0,
-1.510576320468E-1));
#2138=(BOUNDED_SURFACE()B_SPLINE_SURFACE(3,3,((#2110,#2111,#2112,#2113),(#2114,
#2115,#2116,#2117),(#2118,#2119,#2120,#2121),(#2122,#2123,#2124,#2125),(#2126,
#2127,#2128,#2129),(#2130,#2131,#2132,#2133),(#2134,#2135,#2136,#2137)),
.UNSPECIFIED.,.F.,.F.,.F.)B_SPLINE_SURFACE_WITH_KNOTS((4,3,4),(4,4),(0.E0,1.E0,
2.E0),(0.E0,1.E0),.UNSPECIFIED.)GEOMETRIC_REPRESENTATION_ITEM()RATIONAL_B_SPLINE_SURFACE(((1.409595724601E0,1.113151735125E0,1.113151735125E0,1.409595724601E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.409595724601E0,1.113151735125E0,1.113151735125E0,1.409595724601E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.113155024070E0,8.790537775348E-1,8.790537775348E-1,1.113155024070E0),(
1.409595724601E0,1.113151735125E0,1.113151735125E0,1.409595724601E0)))REPRESENTATION_ITEM('')SURFACE());
#2139=ORIENTED_EDGE('',*,*,#2072,.T.);
#2141=ORIENTED_EDGE('',*,*,#2140,.T.);
#2143=ORIENTED_EDGE('',*,*,#2142,.T.);
#2145=ORIENTED_EDGE('',*,*,#2144,.F.);
#2147=ORIENTED_EDGE('',*,*,#2146,.T.);
#2149=ORIENTED_EDGE('',*,*,#2148,.T.);
#2150=ORIENTED_EDGE('',*,*,#2060,.F.);
#2151=ORIENTED_EDGE('',*,*,#2099,.T.);
#2152=EDGE_LOOP('',(#2139,#2141,#2143,#2145,#2147,#2149,#2150,#2151));
#2153=FACE_OUTER_BOUND('',#2152,.F.);
#2155=CARTESIAN_POINT('',(-2.5E0,1.387778780781E-14,1.5E0));
#2156=DIRECTION('',(-1.E0,0.E0,0.E0));
#2157=DIRECTION('',(0.E0,-1.E0,0.E0));
#2158=AXIS2_PLACEMENT_3D('',#2155,#2156,#2157);
#2159=PLANE('',#2158);
#2160=ORIENTED_EDGE('',*,*,#2070,.F.);
#2162=ORIENTED_EDGE('',*,*,#2161,.T.);
#2164=ORIENTED_EDGE('',*,*,#2163,.F.);
#2166=ORIENTED_EDGE('',*,*,#2165,.F.);
#2167=ORIENTED_EDGE('',*,*,#2140,.F.);
#2168=EDGE_LOOP('',(#2160,#2162,#2164,#2166,#2167));
#2169=FACE_OUTER_BOUND('',#2168,.F.);
#2171=CARTESIAN_POINT('',(-2.5E0,1.387778780781E-14,-1.5E0));
#2172=DIRECTION('',(0.E0,0.E0,-1.E0));
#2173=DIRECTION('',(-1.E0,0.E0,0.E0));
#2174=AXIS2_PLACEMENT_3D('',#2171,#2172,#2173);
#2175=PLANE('',#2174);
#2176=ORIENTED_EDGE('',*,*,#2068,.F.);
#2178=ORIENTED_EDGE('',*,*,#2177,.F.);
#2179=ORIENTED_EDGE('',*,*,#2064,.F.);
#2181=ORIENTED_EDGE('',*,*,#2180,.T.);
#2183=ORIENTED_EDGE('',*,*,#2182,.F.);
#2184=ORIENTED_EDGE('',*,*,#2161,.F.);
#2185=EDGE_LOOP('',(#2176,#2178,#2179,#2181,#2183,#2184));
#2186=FACE_OUTER_BOUND('',#2185,.F.);
#2188=CARTESIAN_POINT('',(2.5E0,-3.E0,0.E0));
#2189=DIRECTION('',(0.E0,1.E0,0.E0));
#2190=DIRECTION('',(-1.E0,0.E0,0.E0));
#2191=AXIS2_PLACEMENT_3D('',#2188,#2189,#2190);
#2192=PLANE('',#2191);
#2193=ORIENTED_EDGE('',*,*,#2177,.T.);
#2194=ORIENTED_EDGE('',*,*,#2066,.T.);
#2195=EDGE_LOOP('',(#2193,#2194));
#2196=FACE_OUTER_BOUND('',#2195,.F.);
#2198=CARTESIAN_POINT('',(2.5E0,3.122502256758E-14,1.5E0));
#2199=DIRECTION('',(1.E0,0.E0,0.E0));
#2200=DIRECTION('',(0.E0,1.E0,0.E0));
#2201=AXIS2_PLACEMENT_3D('',#2198,#2199,#2200);
#2202=PLANE('',#2201);
#2203=ORIENTED_EDGE('',*,*,#2148,.F.);
#2205=ORIENTED_EDGE('',*,*,#2204,.T.);
#2207=ORIENTED_EDGE('',*,*,#2206,.F.);
#2208=ORIENTED_EDGE('',*,*,#2180,.F.);
#2209=ORIENTED_EDGE('',*,*,#2062,.F.);
#2210=EDGE_LOOP('',(#2203,#2205,#2207,#2208,#2209));
#2211=FACE_OUTER_BOUND('',#2210,.F.);
#2213=CARTESIAN_POINT('',(-2.5E0,1.387778780781E-14,1.5E0));
#2214=DIRECTION('',(0.E0,0.E0,1.E0));
#2215=DIRECTION('',(1.E0,0.E0,0.E0));
#2216=AXIS2_PLACEMENT_3D('',#2213,#2214,#2215);
#2217=PLANE('',#2216);
#2218=ORIENTED_EDGE('',*,*,#2146,.F.);
#2220=ORIENTED_EDGE('',*,*,#2219,.F.);
#2221=ORIENTED_EDGE('',*,*,#2142,.F.);
#2222=ORIENTED_EDGE('',*,*,#2165,.T.);
#2224=ORIENTED_EDGE('',*,*,#2223,.F.);
#2225=ORIENTED_EDGE('',*,*,#2204,.F.);
#2226=EDGE_LOOP('',(#2218,#2220,#2221,#2222,#2224,#2225));
#2227=FACE_OUTER_BOUND('',#2226,.F.);
#2229=CARTESIAN_POINT('',(2.5E0,-3.E0,0.E0));
#2230=DIRECTION('',(0.E0,1.E0,0.E0));
#2231=DIRECTION('',(-1.E0,0.E0,0.E0));
#2232=AXIS2_PLACEMENT_3D('',#2229,#2230,#2231);
#2233=PLANE('',#2232);
#2234=ORIENTED_EDGE('',*,*,#2219,.T.);
#2235=ORIENTED_EDGE('',*,*,#2144,.T.);
#2236=EDGE_LOOP('',(#2234,#2235));
#2237=FACE_OUTER_BOUND('',#2236,.F.);
#2239=CARTESIAN_POINT('',(0.E0,-5.5E0,0.E0));
#2240=DIRECTION('',(0.E0,-1.E0,0.E0));
#2241=DIRECTION('',(1.E0,0.E0,0.E0));
#2242=AXIS2_PLACEMENT_3D('',#2239,#2240,#2241);
#2243=PLANE('',#2242);
#2245=ORIENTED_EDGE('',*,*,#2244,.T.);
#2247=ORIENTED_EDGE('',*,*,#2246,.F.);
#2249=ORIENTED_EDGE('',*,*,#2248,.T.);
#2251=ORIENTED_EDGE('',*,*,#2250,.T.);
#2253=ORIENTED_EDGE('',*,*,#2252,.F.);
#2255=ORIENTED_EDGE('',*,*,#2254,.T.);
#2256=EDGE_LOOP('',(#2245,#2247,#2249,#2251,#2253,#2255));
#2257=FACE_OUTER_BOUND('',#2256,.F.);
#2258=ORIENTED_EDGE('',*,*,#2163,.T.);
#2259=ORIENTED_EDGE('',*,*,#2182,.T.);
#2260=ORIENTED_EDGE('',*,*,#2206,.T.);
#2261=ORIENTED_EDGE('',*,*,#2223,.T.);
#2262=EDGE_LOOP('',(#2258,#2259,#2260,#2261));
#2263=FACE_BOUND('',#2262,.F.);
#2265=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#2266=DIRECTION('',(0.E0,-1.E0,0.E0));
#2267=DIRECTION('',(1.E0,0.E0,0.E0));
#2268=AXIS2_PLACEMENT_3D('',#2265,#2266,#2267);
#2269=CYLINDRICAL_SURFACE('',#2268,6.5E0);
#2271=ORIENTED_EDGE('',*,*,#2270,.F.);
#2273=ORIENTED_EDGE('',*,*,#2272,.T.);
#2274=ORIENTED_EDGE('',*,*,#2244,.F.);
#2276=ORIENTED_EDGE('',*,*,#2275,.F.);
#2277=EDGE_LOOP('',(#2271,#2273,#2274,#2276));
#2278=FACE_OUTER_BOUND('',#2277,.F.);
#2280=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#2281=DIRECTION('',(0.E0,-1.E0,0.E0));
#2282=DIRECTION('',(1.E0,0.E0,0.E0));
#2283=AXIS2_PLACEMENT_3D('',#2280,#2281,#2282);
#2284=PLANE('',#2283);
#2285=ORIENTED_EDGE('',*,*,#2102,.T.);
#2286=ORIENTED_EDGE('',*,*,#2086,.T.);
#2288=ORIENTED_EDGE('',*,*,#2287,.T.);
#2289=ORIENTED_EDGE('',*,*,#2270,.T.);
#2291=ORIENTED_EDGE('',*,*,#2290,.T.);
#2293=ORIENTED_EDGE('',*,*,#2292,.T.);
#2294=EDGE_LOOP('',(#2285,#2286,#2288,#2289,#2291,#2293));
#2295=FACE_OUTER_BOUND('',#2294,.F.);
#2297=CARTESIAN_POINT('',(-3.464101615138E0,-3.5E0,-5.5E0));
#2298=DIRECTION('',(0.E0,0.E0,-1.E0));
#2299=DIRECTION('',(-1.E0,0.E0,0.E0));
#2300=AXIS2_PLACEMENT_3D('',#2297,#2298,#2299);
#2301=PLANE('',#2300);
#2303=ORIENTED_EDGE('',*,*,#2302,.F.);
#2305=ORIENTED_EDGE('',*,*,#2304,.F.);
#2306=ORIENTED_EDGE('',*,*,#2246,.T.);
#2307=ORIENTED_EDGE('',*,*,#2272,.F.);
#2308=ORIENTED_EDGE('',*,*,#2287,.F.);
#2309=EDGE_LOOP('',(#2303,#2305,#2306,#2307,#2308));
#2310=FACE_OUTER_BOUND('',#2309,.F.);
#2312=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#2313=DIRECTION('',(0.E0,-1.E0,0.E0));
#2314=DIRECTION('',(1.E0,0.E0,0.E0));
#2315=AXIS2_PLACEMENT_3D('',#2312,#2313,#2314);
#2316=PLANE('',#2315);
#2317=ORIENTED_EDGE('',*,*,#2084,.T.);
#2318=ORIENTED_EDGE('',*,*,#2104,.T.);
#2320=ORIENTED_EDGE('',*,*,#2319,.T.);
#2322=ORIENTED_EDGE('',*,*,#2321,.T.);
#2324=ORIENTED_EDGE('',*,*,#2323,.T.);
#2325=ORIENTED_EDGE('',*,*,#2302,.T.);
#2326=EDGE_LOOP('',(#2317,#2318,#2320,#2322,#2324,#2325));
#2327=FACE_OUTER_BOUND('',#2326,.F.);
#2329=CARTESIAN_POINT('',(-3.464101615138E0,-3.5E0,5.5E0));
#2330=DIRECTION('',(0.E0,0.E0,1.E0));
#2331=DIRECTION('',(1.E0,0.E0,0.E0));
#2332=AXIS2_PLACEMENT_3D('',#2329,#2330,#2331);
#2333=PLANE('',#2332);
#2334=ORIENTED_EDGE('',*,*,#2292,.F.);
#2336=ORIENTED_EDGE('',*,*,#2335,.F.);
#2337=ORIENTED_EDGE('',*,*,#2252,.T.);
#2339=ORIENTED_EDGE('',*,*,#2338,.F.);
#2340=ORIENTED_EDGE('',*,*,#2319,.F.);
#2341=EDGE_LOOP('',(#2334,#2336,#2337,#2339,#2340));
#2342=FACE_OUTER_BOUND('',#2341,.F.);
#2344=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#2345=DIRECTION('',(0.E0,-1.E0,0.E0));
#2346=DIRECTION('',(1.E0,0.E0,0.E0));
#2347=AXIS2_PLACEMENT_3D('',#2344,#2345,#2346);
#2348=CYLINDRICAL_SURFACE('',#2347,6.5E0);
#2349=ORIENTED_EDGE('',*,*,#2275,.T.);
#2350=ORIENTED_EDGE('',*,*,#2254,.F.);
#2351=ORIENTED_EDGE('',*,*,#2335,.T.);
#2352=ORIENTED_EDGE('',*,*,#2290,.F.);
#2353=EDGE_LOOP('',(#2349,#2350,#2351,#2352));
#2354=FACE_OUTER_BOUND('',#2353,.F.);
#2356=CARTESIAN_POINT('',(1.222018468595E-14,-3.5E0,0.E0));
#2357=DIRECTION('',(0.E0,-1.E0,0.E0));
#2358=DIRECTION('',(1.E0,0.E0,0.E0));
#2359=AXIS2_PLACEMENT_3D('',#2356,#2357,#2358);
#2360=CYLINDRICAL_SURFACE('',#2359,6.5E0);
#2361=ORIENTED_EDGE('',*,*,#2248,.F.);
#2362=ORIENTED_EDGE('',*,*,#2304,.T.);
#2363=ORIENTED_EDGE('',*,*,#2323,.F.);
#2364=ORIENTED_EDGE('',*,*,#2321,.F.);
#2365=ORIENTED_EDGE('',*,*,#2338,.T.);
#2366=ORIENTED_EDGE('',*,*,#2250,.F.);
#2367=EDGE_LOOP('',(#2361,#2362,#2363,#2364,#2365,#2366));
#2368=FACE_OUTER_BOUND('',#2367,.F.);
#2370=CLOSED_SHELL('',(#2076,#2093,#2109,#2154,#2170,#2187,#2197,#2212,#2228,
#2238,#2264,#2279,#2296,#2311,#2328,#2343,#2355,#2369));
#2371=MANIFOLD_SOLID_BREP('',#2370);
#2373=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2375=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2374);
#2376=(CONVERSION_BASED_UNIT('DEGREE',#2375)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2378=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.789481434697E-3),#2372,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2380=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2381=DIRECTION('',(0.E0,0.E0,1.E0));
#2382=DIRECTION('',(1.E0,0.E0,0.E0));
#2385=MECHANICAL_CONTEXT('',#281,'mechanical');
#2386=PRODUCT('PRT0004','PRT0004','NOT SPECIFIED',(#2385));
#2387=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2386,.MADE.);
#2396=CARTESIAN_POINT('',(6.020636936722E0,3.562916322404E-1,
-2.698109944351E0));
#2397=DIRECTION('',(0.E0,1.E0,0.E0));
#2398=DIRECTION('',(1.E0,0.E0,0.E0));
#2399=AXIS2_PLACEMENT_3D('',#2396,#2397,#2398);
#2400=ITEM_DEFINED_TRANSFORMATION('','',#2383,#2399);
#2401=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2402=DIRECTION('',(0.E0,0.E0,1.E0));
#2403=DIRECTION('',(1.E0,0.E0,0.E0));
#2405=(REPRESENTATION_RELATIONSHIP('','',#2384,#2393)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2400)SHAPE_REPRESENTATION_RELATIONSHIP());
#2406=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2405,#2395);
#2408=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2410=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2409);
#2411=(CONVERSION_BASED_UNIT('DEGREE',#2410)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2413=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.789481434697E-3),#2407,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2415=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2416=DIRECTION('',(0.E0,0.E0,1.E0));
#2417=DIRECTION('',(1.E0,0.E0,0.E0));
#2419=DESIGN_CONTEXT('',#281,'design');
#2420=MECHANICAL_CONTEXT('',#281,'mechanical');
#2421=PRODUCT('ASM0002_ASM_ASM','ASM0002_ASM_ASM','NOT SPECIFIED',(#2420));
#2422=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2421,.MADE.);
#2429=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2430=DIRECTION('',(0.E0,0.E0,1.E0));
#2431=DIRECTION('',(1.E0,0.E0,0.E0));
#2432=AXIS2_PLACEMENT_3D('',#2429,#2430,#2431);
#2433=ITEM_DEFINED_TRANSFORMATION('','',#2404,#2432);
#2434=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2435=DIRECTION('',(0.E0,0.E0,1.E0));
#2436=DIRECTION('',(1.E0,0.E0,0.E0));
#2438=(REPRESENTATION_RELATIONSHIP('','',#2393,#2426)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2433)SHAPE_REPRESENTATION_RELATIONSHIP());
#2439=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2438,#2428);
#2441=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2443=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2442);
#2444=(CONVERSION_BASED_UNIT('DEGREE',#2443)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2446=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.789481434697E-3),#2440,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2448=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2449=DIRECTION('',(0.E0,0.E0,1.E0));
#2450=DIRECTION('',(1.E0,0.E0,0.E0));
#2452=MECHANICAL_CONTEXT('',#281,'mechanical');
#2453=PRODUCT('ASM0001_ASM_ASM','ASM0001_ASM_ASM','NOT SPECIFIED',(#2452));
#2454=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2453,.MADE.);
#2458=CARTESIAN_POINT('',(6.020636936722E0,-3.562916322404E-1,
-1.889810994435E1));
#2459=DIRECTION('',(0.E0,0.E0,-1.E0));
#2460=DIRECTION('',(-1.E0,0.E0,0.E0));
#2461=AXIS2_PLACEMENT_3D('',#2458,#2459,#2460);
#2462=ITEM_DEFINED_TRANSFORMATION('','',#2437,#2461);
#2463=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2464=DIRECTION('',(0.E0,0.E0,1.E0));
#2465=DIRECTION('',(1.E0,0.E0,0.E0));
#2467=(REPRESENTATION_RELATIONSHIP('','',#2426,#1715)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2462)SHAPE_REPRESENTATION_RELATIONSHIP());
#2468=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2467,#2457);
#2469=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#2470=DIRECTION('',(0.E0,0.E0,1.E0));
#2471=DIRECTION('',(-1.E0,0.E0,0.E0));
#2472=AXIS2_PLACEMENT_3D('',#2469,#2470,#2471);
#2474=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#2475=DIRECTION('',(0.E0,0.E0,1.E0));
#2476=DIRECTION('',(1.E0,0.E0,0.E0));
#2477=AXIS2_PLACEMENT_3D('',#2474,#2475,#2476);
#2479=CARTESIAN_POINT('',(0.E0,0.E0,-1.67E1));
#2480=DIRECTION('',(0.E0,0.E0,-1.E0));
#2481=DIRECTION('',(-9.038461538462E-1,-4.278576050247E-1,0.E0));
#2482=AXIS2_PLACEMENT_3D('',#2479,#2480,#2481);
#2484=DIRECTION('',(0.E0,0.E0,-1.E0));
#2485=VECTOR('',#2484,5.E-1);
#2486=CARTESIAN_POINT('',(-4.7E0,-2.224859546129E0,-1.62E1));
#2487=LINE('',#2486,#2485);
#2488=DIRECTION('',(0.E0,0.E0,-1.E0));
#2489=VECTOR('',#2488,5.E-1);
#2490=CARTESIAN_POINT('',(4.7E0,-2.224859546129E0,-1.62E1));
#2491=LINE('',#2490,#2489);
#2492=CARTESIAN_POINT('',(0.E0,0.E0,-1.67E1));
#2493=DIRECTION('',(0.E0,0.E0,-1.E0));
#2494=DIRECTION('',(1.E0,0.E0,0.E0));
#2495=AXIS2_PLACEMENT_3D('',#2492,#2493,#2494);
#2497=DIRECTION('',(0.E0,0.E0,-1.E0));
#2498=VECTOR('',#2497,1.7E0);
#2499=CARTESIAN_POINT('',(5.2E0,0.E0,-1.67E1));
#2500=LINE('',#2499,#2498);
#2501=CARTESIAN_POINT('',(0.E0,0.E0,-1.67E1));
#2502=DIRECTION('',(0.E0,0.E0,-1.E0));
#2503=DIRECTION('',(-1.E0,0.E0,0.E0));
#2504=AXIS2_PLACEMENT_3D('',#2501,#2502,#2503);
#2506=DIRECTION('',(0.E0,0.E0,-1.E0));
#2507=VECTOR('',#2506,1.7E0);
#2508=CARTESIAN_POINT('',(-5.2E0,0.E0,-1.67E1));
#2509=LINE('',#2508,#2507);
#2510=CARTESIAN_POINT('',(0.E0,0.E0,-1.67E1));
#2511=DIRECTION('',(0.E0,0.E0,-1.E0));
#2512=DIRECTION('',(9.038461538462E-1,4.278576050247E-1,0.E0));
#2513=AXIS2_PLACEMENT_3D('',#2510,#2511,#2512);
#2515=DIRECTION('',(0.E0,0.E0,-1.E0));
#2516=VECTOR('',#2515,5.E-1);
#2517=CARTESIAN_POINT('',(4.7E0,2.224859546129E0,-1.62E1));
#2518=LINE('',#2517,#2516);
#2519=DIRECTION('',(0.E0,0.E0,-1.E0));
#2520=VECTOR('',#2519,5.E-1);
#2521=CARTESIAN_POINT('',(-4.7E0,2.224859546129E0,-1.62E1));
#2522=LINE('',#2521,#2520);
#2523=DIRECTION('',(0.E0,-1.E0,0.E0));
#2524=VECTOR('',#2523,4.449719092257E0);
#2525=CARTESIAN_POINT('',(4.7E0,2.224859546129E0,-1.67E1));
#2526=LINE('',#2525,#2524);
#2527=DIRECTION('',(0.E0,-1.E0,0.E0));
#2528=VECTOR('',#2527,4.449719092257E0);
#2529=CARTESIAN_POINT('',(4.7E0,2.224859546129E0,-1.62E1));
#2530=LINE('',#2529,#2528);
#2531=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#2532=DIRECTION('',(0.E0,0.E0,1.E0));
#2533=DIRECTION('',(-1.E0,0.E0,0.E0));
#2534=AXIS2_PLACEMENT_3D('',#2531,#2532,#2533);
#2536=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#2537=DIRECTION('',(0.E0,0.E0,1.E0));
#2538=DIRECTION('',(1.E0,0.E0,0.E0));
#2539=AXIS2_PLACEMENT_3D('',#2536,#2537,#2538);
#2541=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#2542=DIRECTION('',(0.E0,0.E0,-1.E0));
#2543=DIRECTION('',(-9.038461538462E-1,4.278576050247E-1,0.E0));
#2544=AXIS2_PLACEMENT_3D('',#2541,#2542,#2543);
#2546=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#2547=DIRECTION('',(0.E0,0.E0,-1.E0));
#2548=DIRECTION('',(9.038461538462E-1,-4.278576050247E-1,0.E0));
#2549=AXIS2_PLACEMENT_3D('',#2546,#2547,#2548);
#2551=DIRECTION('',(0.E0,-1.E0,0.E0));
#2552=VECTOR('',#2551,4.449719092257E0);
#2553=CARTESIAN_POINT('',(-4.7E0,2.224859546129E0,-1.62E1));
#2554=LINE('',#2553,#2552);
#2555=DIRECTION('',(0.E0,0.E0,-1.E0));
#2556=VECTOR('',#2555,1.5E0);
#2557=CARTESIAN_POINT('',(5.5E0,0.E0,-1.47E1));
#2558=LINE('',#2557,#2556);
#2559=DIRECTION('',(0.E0,0.E0,-1.E0));
#2560=VECTOR('',#2559,1.5E0);
#2561=CARTESIAN_POINT('',(-5.5E0,0.E0,-1.47E1));
#2562=LINE('',#2561,#2560);
#2563=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#2564=DIRECTION('',(0.E0,0.E0,-1.E0));
#2565=DIRECTION('',(1.E0,0.E0,0.E0));
#2566=AXIS2_PLACEMENT_3D('',#2563,#2564,#2565);
#2568=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#2569=DIRECTION('',(0.E0,0.E0,-1.E0));
#2570=DIRECTION('',(-1.E0,0.E0,0.E0));
#2571=AXIS2_PLACEMENT_3D('',#2568,#2569,#2570);
#2573=DIRECTION('',(0.E0,-1.E0,0.E0));
#2574=VECTOR('',#2573,4.449719092257E0);
#2575=CARTESIAN_POINT('',(-4.7E0,2.224859546129E0,-1.67E1));
#2576=LINE('',#2575,#2574);
#2577=CARTESIAN_POINT('',(-5.2E0,0.E0,-1.84E1));
#2578=CARTESIAN_POINT('',(5.2E0,0.E0,-1.84E1));
#2579=VERTEX_POINT('',#2577);
#2580=VERTEX_POINT('',#2578);
#2581=CARTESIAN_POINT('',(-5.5E0,0.E0,-1.62E1));
#2582=CARTESIAN_POINT('',(5.5E0,0.E0,-1.62E1));
#2583=VERTEX_POINT('',#2581);
#2584=VERTEX_POINT('',#2582);
#2585=CARTESIAN_POINT('',(-5.5E0,0.E0,-1.47E1));
#2586=VERTEX_POINT('',#2585);
#2587=CARTESIAN_POINT('',(5.5E0,0.E0,-1.47E1));
#2588=VERTEX_POINT('',#2587);
#2589=CARTESIAN_POINT('',(-4.7E0,-2.224859546129E0,-1.67E1));
#2590=CARTESIAN_POINT('',(-5.2E0,0.E0,-1.67E1));
#2591=VERTEX_POINT('',#2589);
#2592=VERTEX_POINT('',#2590);
#2593=CARTESIAN_POINT('',(-4.7E0,-2.224859546129E0,-1.62E1));
#2594=VERTEX_POINT('',#2593);
#2595=CARTESIAN_POINT('',(4.7E0,-2.224859546129E0,-1.62E1));
#2596=CARTESIAN_POINT('',(4.7E0,-2.224859546129E0,-1.67E1));
#2597=VERTEX_POINT('',#2595);
#2598=VERTEX_POINT('',#2596);
#2599=CARTESIAN_POINT('',(5.2E0,0.E0,-1.67E1));
#2600=VERTEX_POINT('',#2599);
#2601=CARTESIAN_POINT('',(-4.7E0,2.224859546129E0,-1.67E1));
#2602=VERTEX_POINT('',#2601);
#2603=CARTESIAN_POINT('',(-4.7E0,2.224859546129E0,-1.62E1));
#2604=VERTEX_POINT('',#2603);
#2605=CARTESIAN_POINT('',(4.7E0,2.224859546129E0,-1.62E1));
#2606=CARTESIAN_POINT('',(4.7E0,2.224859546129E0,-1.67E1));
#2607=VERTEX_POINT('',#2605);
#2608=VERTEX_POINT('',#2606);
#2609=CARTESIAN_POINT('',(0.E0,0.E0,-1.84E1));
#2610=DIRECTION('',(0.E0,0.E0,-1.E0));
#2611=DIRECTION('',(1.E0,0.E0,0.E0));
#2612=AXIS2_PLACEMENT_3D('',#2609,#2610,#2611);
#2613=PLANE('',#2612);
#2615=ORIENTED_EDGE('',*,*,#2614,.T.);
#2617=ORIENTED_EDGE('',*,*,#2616,.T.);
#2618=EDGE_LOOP('',(#2615,#2617));
#2619=FACE_OUTER_BOUND('',#2618,.F.);
#2621=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2622=DIRECTION('',(0.E0,0.E0,-1.E0));
#2623=DIRECTION('',(1.E0,0.E0,0.E0));
#2624=AXIS2_PLACEMENT_3D('',#2621,#2622,#2623);
#2625=CYLINDRICAL_SURFACE('',#2624,5.2E0);
#2627=ORIENTED_EDGE('',*,*,#2626,.F.);
#2629=ORIENTED_EDGE('',*,*,#2628,.F.);
#2631=ORIENTED_EDGE('',*,*,#2630,.F.);
#2633=ORIENTED_EDGE('',*,*,#2632,.T.);
#2635=ORIENTED_EDGE('',*,*,#2634,.F.);
#2637=ORIENTED_EDGE('',*,*,#2636,.T.);
#2638=ORIENTED_EDGE('',*,*,#2614,.F.);
#2640=ORIENTED_EDGE('',*,*,#2639,.F.);
#2641=EDGE_LOOP('',(#2627,#2629,#2631,#2633,#2635,#2637,#2638,#2640));
#2642=FACE_OUTER_BOUND('',#2641,.F.);
#2644=CARTESIAN_POINT('',(-5.37E0,5.E0,-1.67E1));
#2645=DIRECTION('',(0.E0,0.E0,-1.E0));
#2646=DIRECTION('',(1.E0,0.E0,0.E0));
#2647=AXIS2_PLACEMENT_3D('',#2644,#2645,#2646);
#2648=PLANE('',#2647);
#2649=ORIENTED_EDGE('',*,*,#2626,.T.);
#2651=ORIENTED_EDGE('',*,*,#2650,.T.);
#2653=ORIENTED_EDGE('',*,*,#2652,.T.);
#2654=EDGE_LOOP('',(#2649,#2651,#2653));
#2655=FACE_OUTER_BOUND('',#2654,.F.);
#2657=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2658=DIRECTION('',(0.E0,0.E0,-1.E0));
#2659=DIRECTION('',(1.E0,0.E0,0.E0));
#2660=AXIS2_PLACEMENT_3D('',#2657,#2658,#2659);
#2661=CYLINDRICAL_SURFACE('',#2660,5.2E0);
#2662=ORIENTED_EDGE('',*,*,#2650,.F.);
#2663=ORIENTED_EDGE('',*,*,#2639,.T.);
#2664=ORIENTED_EDGE('',*,*,#2616,.F.);
#2665=ORIENTED_EDGE('',*,*,#2636,.F.);
#2667=ORIENTED_EDGE('',*,*,#2666,.F.);
#2669=ORIENTED_EDGE('',*,*,#2668,.F.);
#2671=ORIENTED_EDGE('',*,*,#2670,.F.);
#2673=ORIENTED_EDGE('',*,*,#2672,.T.);
#2674=EDGE_LOOP('',(#2662,#2663,#2664,#2665,#2667,#2669,#2671,#2673));
#2675=FACE_OUTER_BOUND('',#2674,.F.);
#2677=CARTESIAN_POINT('',(4.7E0,5.E0,-1.67E1));
#2678=DIRECTION('',(0.E0,0.E0,-1.E0));
#2679=DIRECTION('',(1.E0,0.E0,0.E0));
#2680=AXIS2_PLACEMENT_3D('',#2677,#2678,#2679);
#2681=PLANE('',#2680);
#2682=ORIENTED_EDGE('',*,*,#2634,.T.);
#2684=ORIENTED_EDGE('',*,*,#2683,.F.);
#2685=ORIENTED_EDGE('',*,*,#2666,.T.);
#2686=EDGE_LOOP('',(#2682,#2684,#2685));
#2687=FACE_OUTER_BOUND('',#2686,.F.);
#2689=CARTESIAN_POINT('',(4.7E0,5.E0,-1.62E1));
#2690=DIRECTION('',(-1.E0,0.E0,0.E0));
#2691=DIRECTION('',(0.E0,0.E0,-1.E0));
#2692=AXIS2_PLACEMENT_3D('',#2689,#2690,#2691);
#2693=PLANE('',#2692);
#2694=ORIENTED_EDGE('',*,*,#2632,.F.);
#2696=ORIENTED_EDGE('',*,*,#2695,.F.);
#2697=ORIENTED_EDGE('',*,*,#2668,.T.);
#2698=ORIENTED_EDGE('',*,*,#2683,.T.);
#2699=EDGE_LOOP('',(#2694,#2696,#2697,#2698));
#2700=FACE_OUTER_BOUND('',#2699,.F.);
#2702=CARTESIAN_POINT('',(0.E0,0.E0,-1.62E1));
#2703=DIRECTION('',(0.E0,0.E0,-1.E0));
#2704=DIRECTION('',(1.E0,0.E0,0.E0));
#2705=AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);
#2706=PLANE('',#2705);
#2708=ORIENTED_EDGE('',*,*,#2707,.T.);
#2710=ORIENTED_EDGE('',*,*,#2709,.T.);
#2711=EDGE_LOOP('',(#2708,#2710));
#2712=FACE_OUTER_BOUND('',#2711,.F.);
#2713=ORIENTED_EDGE('',*,*,#2670,.T.);
#2714=ORIENTED_EDGE('',*,*,#2695,.T.);
#2715=ORIENTED_EDGE('',*,*,#2630,.T.);
#2717=ORIENTED_EDGE('',*,*,#2716,.F.);
#2718=EDGE_LOOP('',(#2713,#2714,#2715,#2717));
#2719=FACE_BOUND('',#2718,.F.);
#2721=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2722=DIRECTION('',(0.E0,0.E0,-1.E0));
#2723=DIRECTION('',(1.E0,0.E0,0.E0));
#2724=AXIS2_PLACEMENT_3D('',#2721,#2722,#2723);
#2725=CYLINDRICAL_SURFACE('',#2724,5.5E0);
#2727=ORIENTED_EDGE('',*,*,#2726,.F.);
#2729=ORIENTED_EDGE('',*,*,#2728,.F.);
#2731=ORIENTED_EDGE('',*,*,#2730,.T.);
#2732=ORIENTED_EDGE('',*,*,#2707,.F.);
#2733=EDGE_LOOP('',(#2727,#2729,#2731,#2732));
#2734=FACE_OUTER_BOUND('',#2733,.F.);
#2736=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2737=DIRECTION('',(0.E0,0.E0,-1.E0));
#2738=DIRECTION('',(1.E0,0.E0,0.E0));
#2739=AXIS2_PLACEMENT_3D('',#2736,#2737,#2738);
#2740=CYLINDRICAL_SURFACE('',#2739,5.5E0);
#2741=ORIENTED_EDGE('',*,*,#2726,.T.);
#2742=ORIENTED_EDGE('',*,*,#2709,.F.);
#2743=ORIENTED_EDGE('',*,*,#2730,.F.);
#2745=ORIENTED_EDGE('',*,*,#2744,.F.);
#2746=EDGE_LOOP('',(#2741,#2742,#2743,#2745));
#2747=FACE_OUTER_BOUND('',#2746,.F.);
#2749=CARTESIAN_POINT('',(0.E0,0.E0,-1.47E1));
#2750=DIRECTION('',(0.E0,0.E0,-1.E0));
#2751=DIRECTION('',(1.E0,0.E0,0.E0));
#2752=AXIS2_PLACEMENT_3D('',#2749,#2750,#2751);
#2753=PLANE('',#2752);
#2754=ORIENTED_EDGE('',*,*,#2728,.T.);
#2755=ORIENTED_EDGE('',*,*,#2744,.T.);
#2756=EDGE_LOOP('',(#2754,#2755));
#2757=FACE_OUTER_BOUND('',#2756,.F.);
#2759=CARTESIAN_POINT('',(-4.7E0,5.E0,-1.67E1));
#2760=DIRECTION('',(1.E0,0.E0,0.E0));
#2761=DIRECTION('',(0.E0,0.E0,1.E0));
#2762=AXIS2_PLACEMENT_3D('',#2759,#2760,#2761);
#2763=PLANE('',#2762);
#2764=ORIENTED_EDGE('',*,*,#2628,.T.);
#2765=ORIENTED_EDGE('',*,*,#2652,.F.);
#2766=ORIENTED_EDGE('',*,*,#2672,.F.);
#2767=ORIENTED_EDGE('',*,*,#2716,.T.);
#2768=EDGE_LOOP('',(#2764,#2765,#2766,#2767));
#2769=FACE_OUTER_BOUND('',#2768,.F.);
#2771=CLOSED_SHELL('',(#2620,#2643,#2656,#2676,#2688,#2701,#2720,#2735,#2748,
#2758,#2770));
#2772=MANIFOLD_SOLID_BREP('',#2771);
#2774=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2776=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2775);
#2777=(CONVERSION_BASED_UNIT('DEGREE',#2776)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2779=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.599484785079E-3),#2773,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2781=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2782=DIRECTION('',(0.E0,0.E0,1.E0));
#2783=DIRECTION('',(1.E0,0.E0,0.E0));
#2786=DESIGN_CONTEXT('',#281,'design');
#2787=MECHANICAL_CONTEXT('',#281,'mechanical');
#2788=PRODUCT('PRT0001','PRT0001','NOT SPECIFIED',(#2787));
#2789=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION',
#2788,.MADE.);
#2795=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2796=DIRECTION('',(0.E0,0.E0,1.E0));
#2797=DIRECTION('',(1.E0,0.E0,0.E0));
#2798=AXIS2_PLACEMENT_3D('',#2795,#2796,#2797);
#2799=ITEM_DEFINED_TRANSFORMATION('','',#2784,#2798);
#2800=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2801=DIRECTION('',(0.E0,0.E0,1.E0));
#2802=DIRECTION('',(1.E0,0.E0,0.E0));
#2804=(REPRESENTATION_RELATIONSHIP('','',#2785,#1715)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2799)SHAPE_REPRESENTATION_RELATIONSHIP());
#2805=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2804,#2794);
#2807=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2809=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2808);
#2810=(CONVERSION_BASED_UNIT('DEGREE',#2809)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2812=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.857143054028E-3),#2806,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2814=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2815=DIRECTION('',(0.E0,0.E0,1.E0));
#2816=DIRECTION('',(1.E0,0.E0,0.E0));
#2818=MECHANICAL_CONTEXT('',#281,'mechanical');
#2819=PRODUCT('ASM0001_ASM','ASM0001_ASM','NOT SPECIFIED',(#2818));
#2820=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#2819,.MADE.);
#2827=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2828=DIRECTION('',(0.E0,0.E0,1.E0));
#2829=DIRECTION('',(1.E0,0.E0,0.E0));
#2830=AXIS2_PLACEMENT_3D('',#2827,#2828,#2829);
#2831=ITEM_DEFINED_TRANSFORMATION('','',#1726,#2830);
#2832=(REPRESENTATION_RELATIONSHIP('','',#1715,#2824)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2831)SHAPE_REPRESENTATION_RELATIONSHIP());
#2833=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2832,#2826);
#2835=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2837=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2836);
#2838=(CONVERSION_BASED_UNIT('DEGREE',#2837)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#2840=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.857143054028E-3),#2834,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2842=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2843=DIRECTION('',(0.E0,0.E0,1.E0));
#2844=DIRECTION('',(1.E0,0.E0,0.E0));
#2846=DESIGN_CONTEXT('',#281,'design');
#2847=MECHANICAL_CONTEXT('',#281,'mechanical');
#2848=PRODUCT('00000_ASM_ASM','00000_ASM_ASM','NOT SPECIFIED',(#2847));
#2849=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION',
#2848,.MADE.);
#2851=PRODUCT_CATEGORY('part','');
#2852=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#1710,#2421,#2453,#2819,
#2848));
#2853=PRODUCT_CATEGORY_RELATIONSHIP('','',#2851,#2852);
#2854=PRODUCT_CATEGORY('part','');
#2855=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#285,#633,#1314,#1435,#1557,
#1678,#2386,#2788));
#2856=PRODUCT_CATEGORY_RELATIONSHIP('','',#2854,#2855);
#2857=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#2858=SECURITY_CLASSIFICATION('','',#2857);
#2859=CC_DESIGN_SECURITY_CLASSIFICATION(#2858,(#286,#634,#1315,#1436,#1558,
#1679,#1711,#2387,#2422,#2454,#2789,#2820,#2849,#293,#638,#1319,#1440,#1562,
#1683,#1716,#2394,#2427,#2456,#2793,#2825));
#2860=APPROVAL_STATUS('approved');
#2861=APPROVAL(#2860,'');
#2862=CC_DESIGN_APPROVAL(#2861,(#2858,#286,#634,#1315,#1436,#1558,#1679,#1711,
#2387,#2422,#2454,#2789,#2820,#2849,#287,#635,#1316,#1437,#1559,#1680,#1712,
#2388,#2423,#2455,#2790,#2821,#2850));
#2863=CALENDAR_DATE(121,7,12);
#2864=COORDINATED_UNIVERSAL_TIME_OFFSET(8,0,.AHEAD.);
#2865=LOCAL_TIME(22,32,2.E1,#2864);
#2866=DATE_AND_TIME(#2863,#2865);
#2867=APPROVAL_DATE_TIME(#2866,#2861);
#2868=DATE_TIME_ROLE('creation_date');
#2869=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#2866,#2868,(#287,#635,#1316,#1437,
#1559,#1680,#1712,#2388,#2423,#2455,#2790,#2821,#2850));
#2870=DATE_TIME_ROLE('classification_date');
#2871=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#2866,#2870,(#2858));
#2872=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#2873=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#2874=PERSON_AND_ORGANIZATION(#2872,#2873);
#2875=APPROVAL_ROLE('approver');
#2876=APPROVAL_PERSON_ORGANIZATION(#2874,#2861,#2875);
#2877=PERSON_AND_ORGANIZATION_ROLE('creator');
#2878=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2874,#2877,(#286,#634,#1315,
#1436,#1558,#1679,#1711,#2387,#2422,#2454,#2789,#2820,#2849,#287,#635,#1316,
#1437,#1559,#1680,#1712,#2388,#2423,#2455,#2790,#2821,#2850));
#2879=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#2880=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2874,#2879,(#286,#634,#1315,
#1436,#1558,#1679,#1711,#2387,#2422,#2454,#2789,#2820,#2849));
#2881=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#2882=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2874,#2881,(#2858));
#2883=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#2884=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#2874,#2883,(#1710,#2421,
#2453,#2819,#2848,#285,#633,#1314,#1435,#1557,#1678,#2386,#2788));
#6=CIRCLE('',#5,4.35E0);
#11=CIRCLE('',#10,4.35E0);
#16=CIRCLE('',#15,2.85E0);
#21=CIRCLE('',#20,2.85E0);
#26=CIRCLE('',#25,1.5E-1);
#31=CIRCLE('',#30,1.5E-1);
#36=CIRCLE('',#35,4.5E0);
#41=CIRCLE('',#40,1.5E-1);
#46=CIRCLE('',#45,4.456066017177E0);
#59=CIRCLE('',#58,4.5E0);
#64=CIRCLE('',#63,1.5E-1);
#69=CIRCLE('',#68,4.456066017177E0);
#74=CIRCLE('',#73,4.5E0);
#79=CIRCLE('',#78,4.5E0);
#84=CIRCLE('',#83,2.85E0);
#89=CIRCLE('',#88,2.85E0);
#127=EDGE_CURVE('',#100,#101,#6,.T.);
#129=EDGE_CURVE('',#101,#100,#11,.T.);
#133=EDGE_CURVE('',#104,#105,#16,.T.);
#135=EDGE_CURVE('',#105,#104,#21,.T.);
#139=ADVANCED_FACE('',(#132,#138),#126,.F.);
#146=EDGE_CURVE('',#107,#100,#31,.T.);
#148=EDGE_CURVE('',#109,#107,#69,.T.);
#150=EDGE_CURVE('',#109,#101,#26,.T.);
#154=ADVANCED_FACE('',(#153),#144,.T.);
#162=EDGE_CURVE('',#107,#109,#46,.T.);
#167=ADVANCED_FACE('',(#166),#159,.T.);
#173=EDGE_CURVE('',#112,#113,#36,.T.);
#175=EDGE_CURVE('',#113,#107,#41,.T.);
#178=EDGE_CURVE('',#112,#109,#64,.T.);
#182=ADVANCED_FACE('',(#181),#172,.T.);
#189=EDGE_CURVE('',#112,#115,#50,.T.);
#191=EDGE_CURVE('',#117,#115,#79,.T.);
#193=EDGE_CURVE('',#113,#117,#54,.T.);
#197=ADVANCED_FACE('',(#196),#187,.T.);
#203=EDGE_CURVE('',#113,#112,#59,.T.);
#206=EDGE_CURVE('',#115,#117,#74,.T.);
#211=ADVANCED_FACE('',(#210),#202,.T.);
#223=ADVANCED_FACE('',(#222),#216,.T.);
#233=EDGE_CURVE('',#120,#121,#84,.T.);
#235=EDGE_CURVE('',#121,#120,#89,.T.);
#239=ADVANCED_FACE('',(#232,#238),#228,.F.);
#246=EDGE_CURVE('',#104,#121,#93,.T.);
#249=EDGE_CURVE('',#105,#120,#97,.T.);
#253=ADVANCED_FACE('',(#252),#244,.F.);
#265=ADVANCED_FACE('',(#264),#258,.F.);
#268=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#270=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#273=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#275=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#274))GLOBAL_UNIT_ASSIGNED_CONTEXT((#268,#272,#273))REPRESENTATION_CONTEXT
('ID1','3'));
#279=AXIS2_PLACEMENT_3D('',#276,#277,#278);
#280=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#279,#267),#275);
#287=PRODUCT_DEFINITION('design','',#286,#283);
#288=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR MANIFOLD_SOLID_BREP_159.',#287);
#289=SHAPE_DEFINITION_REPRESENTATION(#288,#280);
#290=SHAPE_DEFINITION_REPRESENTATION(#291,#292);
#291=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 0000001-20_ASM_ASM.',#1712);
#292=SHAPE_REPRESENTATION('',(#303,#298,#648,#643,#1329,#1324,#1450,#1445,#1572,
#1567,#1693,#1688,#1707),#1703);
#293=NEXT_ASSEMBLY_USAGE_OCCURRENCE('0','Next assembly relationship',
'MANIFOLD_SOLID_BREP_159',#1712,#287,$);
#294=PRODUCT_DEFINITION_SHAPE('Placement #0',
'Placement of MANIFOLD_SOLID_BREP_159 with respect to 0000001-20_ASM_ASM',#293);
#303=AXIS2_PLACEMENT_3D('',#300,#301,#302);
#311=CIRCLE('',#310,2.725E0);
#316=CIRCLE('',#315,2.725E0);
#321=CIRCLE('',#320,2.35E0);
#326=CIRCLE('',#325,2.35E0);
#331=CIRCLE('',#330,2.35E0);
#336=CIRCLE('',#335,2.35E0);
#341=CIRCLE('',#340,2.E-1);
#346=CIRCLE('',#345,2.E-1);
#351=CIRCLE('',#350,2.925E0);
#356=CIRCLE('',#355,2.E-1);
#361=CIRCLE('',#360,2.866421356236E0);
#374=CIRCLE('',#373,2.925E0);
#379=CIRCLE('',#378,2.E-1);
#384=CIRCLE('',#383,2.866421356236E0);
#389=CIRCLE('',#388,2.925E0);
#394=CIRCLE('',#393,2.925E0);
#407=CIRCLE('',#406,2.35E0);
#412=CIRCLE('',#411,2.35E0);
#417=CIRCLE('',#416,2.35E0);
#422=CIRCLE('',#421,2.35E0);
#460=EDGE_CURVE('',#425,#426,#311,.T.);
#462=EDGE_CURVE('',#426,#425,#316,.T.);
#466=EDGE_CURVE('',#429,#430,#321,.T.);
#468=EDGE_CURVE('',#430,#432,#326,.T.);
#470=EDGE_CURVE('',#432,#434,#331,.T.);
#472=EDGE_CURVE('',#434,#429,#336,.T.);
#476=ADVANCED_FACE('',(#465,#475),#459,.F.);
#483=EDGE_CURVE('',#436,#425,#346,.T.);
#485=EDGE_CURVE('',#438,#436,#384,.T.);
#487=EDGE_CURVE('',#438,#426,#341,.T.);
#491=ADVANCED_FACE('',(#490),#481,.T.);
#499=EDGE_CURVE('',#436,#438,#361,.T.);
#504=ADVANCED_FACE('',(#503),#496,.T.);
#510=EDGE_CURVE('',#441,#442,#351,.T.);
#512=EDGE_CURVE('',#442,#436,#356,.T.);
#515=EDGE_CURVE('',#441,#438,#379,.T.);
#519=ADVANCED_FACE('',(#518),#509,.T.);
#526=EDGE_CURVE('',#441,#444,#365,.T.);
#528=EDGE_CURVE('',#446,#444,#389,.T.);
#530=EDGE_CURVE('',#442,#446,#369,.T.);
#534=ADVANCED_FACE('',(#533),#524,.T.);
#540=EDGE_CURVE('',#442,#441,#374,.T.);
#543=EDGE_CURVE('',#444,#446,#394,.T.);
#548=ADVANCED_FACE('',(#547),#539,.T.);
#560=ADVANCED_FACE('',(#559),#553,.T.);
#570=ADVANCED_FACE('',(#569),#565,.T.);
#576=EDGE_CURVE('',#434,#448,#398,.T.);
#578=EDGE_CURVE('',#450,#448,#417,.T.);
#580=EDGE_CURVE('',#452,#450,#412,.T.);
#582=EDGE_CURVE('',#430,#452,#402,.T.);
#588=ADVANCED_FACE('',(#587),#575,.F.);
#595=EDGE_CURVE('',#454,#452,#407,.T.);
#597=EDGE_CURVE('',#448,#454,#422,.T.);
#604=ADVANCED_FACE('',(#603),#593,.F.);
#616=ADVANCED_FACE('',(#615),#609,.F.);
#619=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#621=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#624=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#626=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#625))GLOBAL_UNIT_ASSIGNED_CONTEXT((#619,#623,#624))REPRESENTATION_CONTEXT
('ID2','3'));
#630=AXIS2_PLACEMENT_3D('',#627,#628,#629);
#631=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#630,#618),#626);
#635=PRODUCT_DEFINITION('design','',#634,#283);
#636=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR MANIFOLD_SOLID_BREP_160.',#635);
#637=SHAPE_DEFINITION_REPRESENTATION(#636,#631);
#638=NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','Next assembly relationship',
'MANIFOLD_SOLID_BREP_160',#1712,#635,$);
#639=PRODUCT_DEFINITION_SHAPE('Placement #1',
'Placement of MANIFOLD_SOLID_BREP_160 with respect to 0000001-20_ASM_ASM',#638);
#648=AXIS2_PLACEMENT_3D('',#645,#646,#647);
#655=CIRCLE('',#654,2.55E0);
#660=CIRCLE('',#659,2.55E0);
#673=CIRCLE('',#672,2.55E0);
#678=CIRCLE('',#677,2.55E0);
#683=CIRCLE('',#682,2.35E0);
#688=CIRCLE('',#687,2.35E0);
#701=CIRCLE('',#700,2.35E0);
#706=CIRCLE('',#705,2.35E0);
#711=CIRCLE('',#710,1.85E0);
#716=CIRCLE('',#715,1.85E0);
#729=CIRCLE('',#728,1.85E0);
#734=CIRCLE('',#733,1.85E0);
#739=CIRCLE('',#738,1.65E0);
#744=CIRCLE('',#743,1.65E0);
#757=CIRCLE('',#756,1.65E0);
#762=CIRCLE('',#761,1.65E0);
#767=CIRCLE('',#766,1.15E0);
#772=CIRCLE('',#771,1.15E0);
#785=CIRCLE('',#784,1.15E0);
#790=CIRCLE('',#789,1.15E0);
#795=CIRCLE('',#794,9.5E-1);
#800=CIRCLE('',#799,9.5E-1);
#813=CIRCLE('',#812,9.5E-1);
#818=CIRCLE('',#817,9.5E-1);
#823=CIRCLE('',#822,4.5E-1);
#828=CIRCLE('',#827,4.5E-1);
#841=CIRCLE('',#840,4.5E-1);
#846=CIRCLE('',#845,4.5E-1);
#851=CIRCLE('',#850,2.5E-1);
#856=CIRCLE('',#855,2.5E-1);
#869=CIRCLE('',#868,2.5E-1);
#874=CIRCLE('',#873,2.5E-1);
#944=EDGE_CURVE('',#877,#878,#655,.T.);
#946=EDGE_CURVE('',#878,#877,#660,.T.);
#950=ADVANCED_FACE('',(#949),#943,.F.);
#956=EDGE_CURVE('',#878,#880,#668,.T.);
#959=EDGE_CURVE('',#877,#882,#664,.T.);
#961=EDGE_CURVE('',#880,#882,#673,.T.);
#965=ADVANCED_FACE('',(#964),#955,.T.);
#974=EDGE_CURVE('',#882,#880,#678,.T.);
#978=ADVANCED_FACE('',(#977),#970,.T.);
#988=EDGE_CURVE('',#885,#886,#683,.T.);
#990=EDGE_CURVE('',#886,#885,#688,.T.);
#994=ADVANCED_FACE('',(#987,#993),#983,.T.);
#1000=EDGE_CURVE('',#886,#888,#696,.T.);
#1003=EDGE_CURVE('',#885,#890,#692,.T.);
#1005=EDGE_CURVE('',#888,#890,#701,.T.);
#1009=ADVANCED_FACE('',(#1008),#999,.T.);
#1018=EDGE_CURVE('',#890,#888,#706,.T.);
#1022=ADVANCED_FACE('',(#1021),#1014,.T.);
#1032=EDGE_CURVE('',#893,#894,#711,.T.);
#1034=EDGE_CURVE('',#894,#893,#716,.T.);
#1038=ADVANCED_FACE('',(#1031,#1037),#1027,.T.);
#1044=EDGE_CURVE('',#896,#893,#724,.T.);
#1046=EDGE_CURVE('',#898,#896,#729,.T.);
#1048=EDGE_CURVE('',#898,#894,#720,.T.);
#1053=ADVANCED_FACE('',(#1052),#1043,.F.);
#1060=EDGE_CURVE('',#896,#898,#734,.T.);
#1066=ADVANCED_FACE('',(#1065),#1058,.F.);
#1076=EDGE_CURVE('',#901,#902,#739,.T.);
#1078=EDGE_CURVE('',#902,#901,#744,.T.);
#1082=ADVANCED_FACE('',(#1075,#1081),#1071,.T.);
#1088=EDGE_CURVE('',#902,#904,#752,.T.);
#1091=EDGE_CURVE('',#901,#906,#748,.T.);
#1093=EDGE_CURVE('',#904,#906,#757,.T.);
#1097=ADVANCED_FACE('',(#1096),#1087,.T.);
#1106=EDGE_CURVE('',#906,#904,#762,.T.);
#1110=ADVANCED_FACE('',(#1109),#1102,.T.);
#1120=EDGE_CURVE('',#909,#910,#767,.T.);
#1122=EDGE_CURVE('',#910,#909,#772,.T.);
#1126=ADVANCED_FACE('',(#1119,#1125),#1115,.T.);
#1132=EDGE_CURVE('',#912,#909,#780,.T.);
#1134=EDGE_CURVE('',#914,#912,#785,.T.);
#1136=EDGE_CURVE('',#914,#910,#776,.T.);
#1141=ADVANCED_FACE('',(#1140),#1131,.F.);
#1148=EDGE_CURVE('',#912,#914,#790,.T.);
#1154=ADVANCED_FACE('',(#1153),#1146,.F.);
#1164=EDGE_CURVE('',#917,#918,#795,.T.);
#1166=EDGE_CURVE('',#918,#917,#800,.T.);
#1170=ADVANCED_FACE('',(#1163,#1169),#1159,.T.);
#1176=EDGE_CURVE('',#918,#920,#808,.T.);
#1179=EDGE_CURVE('',#917,#922,#804,.T.);
#1181=EDGE_CURVE('',#920,#922,#813,.T.);
#1185=ADVANCED_FACE('',(#1184),#1175,.T.);
#1194=EDGE_CURVE('',#922,#920,#818,.T.);
#1198=ADVANCED_FACE('',(#1197),#1190,.T.);
#1208=EDGE_CURVE('',#925,#926,#823,.T.);
#1210=EDGE_CURVE('',#926,#925,#828,.T.);
#1214=ADVANCED_FACE('',(#1207,#1213),#1203,.T.);
#1220=EDGE_CURVE('',#928,#925,#836,.T.);
#1222=EDGE_CURVE('',#930,#928,#841,.T.);
#1224=EDGE_CURVE('',#930,#926,#832,.T.);
#1229=ADVANCED_FACE('',(#1228),#1219,.F.);
#1236=EDGE_CURVE('',#928,#930,#846,.T.);
#1242=ADVANCED_FACE('',(#1241),#1234,.F.);
#1252=EDGE_CURVE('',#933,#934,#851,.T.);
#1254=EDGE_CURVE('',#934,#933,#856,.T.);
#1258=ADVANCED_FACE('',(#1251,#1257),#1247,.T.);
#1264=EDGE_CURVE('',#934,#936,#864,.T.);
#1267=EDGE_CURVE('',#933,#938,#860,.T.);
#1269=EDGE_CURVE('',#936,#938,#869,.T.);
#1273=ADVANCED_FACE('',(#1272),#1263,.T.);
#1282=EDGE_CURVE('',#938,#936,#874,.T.);
#1286=ADVANCED_FACE('',(#1285),#1278,.T.);
#1296=ADVANCED_FACE('',(#1295),#1291,.T.);
#1299=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1301=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1304=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1306=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1305))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1299,#1303,#1304))REPRESENTATION_CONTEXT(
'ID3','3'));
#1310=AXIS2_PLACEMENT_3D('',#1307,#1308,#1309);
#1311=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1310,#1298),#1306);
#1316=PRODUCT_DEFINITION('design','',#1315,#1312);
#1317=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR MANIFOLD_SOLID_BREP_161.',#1316);
#1318=SHAPE_DEFINITION_REPRESENTATION(#1317,#1311);
#1319=NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','Next assembly relationship',
'MANIFOLD_SOLID_BREP_161',#1712,#1316,$);
#1320=PRODUCT_DEFINITION_SHAPE('Placement #2',
'Placement of MANIFOLD_SOLID_BREP_161 with respect to 0000001-20_ASM_ASM',
#1319);
#1329=AXIS2_PLACEMENT_3D('',#1326,#1327,#1328);
#1341=CIRCLE('',#1340,4.5E0);
#1346=CIRCLE('',#1345,4.5E0);
#1355=CIRCLE('',#1354,4.5E0);
#1360=CIRCLE('',#1359,4.5E0);
#1374=EDGE_CURVE('',#1363,#1364,#1341,.T.);
#1376=EDGE_CURVE('',#1366,#1363,#1350,.T.);
#1378=EDGE_CURVE('',#1368,#1366,#1360,.T.);
#1380=EDGE_CURVE('',#1368,#1364,#1336,.T.);
#1384=ADVANCED_FACE('',(#1383),#1373,.T.);
#1391=EDGE_CURVE('',#1364,#1363,#1346,.T.);
#1395=ADVANCED_FACE('',(#1394),#1389,.T.);
#1403=EDGE_CURVE('',#1366,#1368,#1355,.T.);
#1408=ADVANCED_FACE('',(#1407),#1400,.T.);
#1418=ADVANCED_FACE('',(#1417),#1413,.F.);
#1421=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1423=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1426=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1428=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1427))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1421,#1425,#1426))REPRESENTATION_CONTEXT(
'ID4','3'));
#1432=AXIS2_PLACEMENT_3D('',#1429,#1430,#1431);
#1433=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1432,#1420),#1428);
#1437=PRODUCT_DEFINITION('design','',#1436,#1312);
#1438=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR MANIFOLD_SOLID_BREP_162.',#1437);
#1439=SHAPE_DEFINITION_REPRESENTATION(#1438,#1433);
#1440=NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','Next assembly relationship',
'MANIFOLD_SOLID_BREP_162',#1712,#1437,$);
#1441=PRODUCT_DEFINITION_SHAPE('Placement #3',
'Placement of MANIFOLD_SOLID_BREP_162 with respect to 0000001-20_ASM_ASM',
#1440);
#1450=AXIS2_PLACEMENT_3D('',#1447,#1448,#1449);
#1462=CIRCLE('',#1461,2.55E0);
#1467=CIRCLE('',#1466,2.55E0);
#1476=CIRCLE('',#1475,2.55E0);
#1481=CIRCLE('',#1480,2.55E0);
#1495=EDGE_CURVE('',#1484,#1485,#1467,.T.);
#1497=EDGE_CURVE('',#1484,#1487,#1457,.T.);
#1499=EDGE_CURVE('',#1489,#1487,#1476,.T.);
#1501=EDGE_CURVE('',#1485,#1489,#1471,.T.);
#1505=ADVANCED_FACE('',(#1504),#1494,.T.);
#1511=EDGE_CURVE('',#1485,#1484,#1462,.T.);
#1516=ADVANCED_FACE('',(#1515),#1510,.F.);
#1524=EDGE_CURVE('',#1487,#1489,#1481,.T.);
#1529=ADVANCED_FACE('',(#1528),#1521,.T.);
#1539=ADVANCED_FACE('',(#1538),#1534,.T.);
#1542=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1544=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1547=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1549=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1548))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1542,#1546,#1547))REPRESENTATION_CONTEXT(
'ID5','3'));
#1553=AXIS2_PLACEMENT_3D('',#1550,#1551,#1552);
#1554=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1553,#1541),#1549);
#1559=PRODUCT_DEFINITION('design','',#1558,#1555);
#1560=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR MANIFOLD_SOLID_BREP_163.',#1559);
#1561=SHAPE_DEFINITION_REPRESENTATION(#1560,#1554);
#1562=NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','Next assembly relationship',
'MANIFOLD_SOLID_BREP_163',#1712,#1559,$);
#1563=PRODUCT_DEFINITION_SHAPE('Placement #4',
'Placement of MANIFOLD_SOLID_BREP_163 with respect to 0000001-20_ASM_ASM',
#1562);
#1572=AXIS2_PLACEMENT_3D('',#1569,#1570,#1571);
#1584=CIRCLE('',#1583,5.25E0);
#1589=CIRCLE('',#1588,5.25E0);
#1598=CIRCLE('',#1597,5.25E0);
#1603=CIRCLE('',#1602,5.25E0);
#1617=EDGE_CURVE('',#1606,#1607,#1589,.T.);
#1619=EDGE_CURVE('',#1609,#1606,#1593,.T.);
#1621=EDGE_CURVE('',#1611,#1609,#1598,.T.);
#1623=EDGE_CURVE('',#1611,#1607,#1579,.T.);
#1627=ADVANCED_FACE('',(#1626),#1616,.T.);
#1633=EDGE_CURVE('',#1607,#1606,#1584,.T.);
#1638=ADVANCED_FACE('',(#1637),#1632,.F.);
#1646=EDGE_CURVE('',#1609,#1611,#1603,.T.);
#1651=ADVANCED_FACE('',(#1650),#1643,.T.);
#1661=ADVANCED_FACE('',(#1660),#1656,.T.);
#1664=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1666=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1669=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1671=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1670))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1664,#1668,#1669))REPRESENTATION_CONTEXT(
'ID6','3'));
#1675=AXIS2_PLACEMENT_3D('',#1672,#1673,#1674);
#1676=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#1675,#1663),#1671);
#1680=PRODUCT_DEFINITION('design','',#1679,#1555);
#1681=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR MANIFOLD_SOLID_BREP_164.',#1680);
#1682=SHAPE_DEFINITION_REPRESENTATION(#1681,#1676);
#1683=NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','Next assembly relationship',
'MANIFOLD_SOLID_BREP_164',#1712,#1680,$);
#1684=PRODUCT_DEFINITION_SHAPE('Placement #5',
'Placement of MANIFOLD_SOLID_BREP_164 with respect to 0000001-20_ASM_ASM',
#1683);
#1693=AXIS2_PLACEMENT_3D('',#1690,#1691,#1692);
#1696=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#1698=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#1701=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#1703=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#1702))GLOBAL_UNIT_ASSIGNED_CONTEXT((#1696,#1700,#1701))REPRESENTATION_CONTEXT(
'ID7','3'));
#1707=AXIS2_PLACEMENT_3D('',#1704,#1705,#1706);
#1712=PRODUCT_DEFINITION('design','',#1711,#1708);
#1713=SHAPE_DEFINITION_REPRESENTATION(#1714,#1715);
#1714=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR ASM0001_ASM.',#2821);
#1715=SHAPE_REPRESENTATION('',(#1726,#1721,#2466,#2461,#2803,#2798,#2817),
#2813);
#1716=NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','Next assembly relationship',
'0000001-20',#2821,#1712,$);
#1717=PRODUCT_DEFINITION_SHAPE('Placement #6',
'Placement of 0000001-20_ASM_ASM with respect to ASM0001_ASM',#1716);
#1726=AXIS2_PLACEMENT_3D('',#1723,#1724,#1725);
#1734=CIRCLE('',#1733,5.5E0);
#1739=CIRCLE('',#1738,3.E0);
#1747=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1740,#1741,#1742,#1743,#1744,#1745,
#1746),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#1754=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1748,#1749,#1750,#1751,#1752,#1753),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#1761=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1755,#1756,#1757,#1758,#1759,#1760),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#1769=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1762,#1763,#1764,#1765,#1766,#1767,
#1768),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#1782=CIRCLE('',#1781,3.E0);
#1790=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1783,#1784,#1785,#1786,#1787,#1788,
#1789),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#1797=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1791,#1792,#1793,#1794,#1795,#1796),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#1804=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1798,#1799,#1800,#1801,#1802,#1803),
.UNSPECIFIED.,.F.,.F.,(4,1,1,4),(0.E0,3.333333333333E-1,6.666666666667E-1,1.E0),
.UNSPECIFIED.);
#1812=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1805,#1806,#1807,#1808,#1809,#1810,
#1811),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#1817=CIRCLE('',#1816,5.5E0);
#1834=CIRCLE('',#1833,2.499993171820E0);
#1851=CIRCLE('',#1850,2.499993171820E0);
#1856=CIRCLE('',#1855,6.5E0);
#1861=CIRCLE('',#1860,6.5E0);
#1866=CIRCLE('',#1865,6.5E0);
#1871=CIRCLE('',#1870,6.5E0);
#1896=CIRCLE('',#1895,5.5E0);
#1901=CIRCLE('',#1900,5.5E0);
#1910=CIRCLE('',#1909,6.5E0);
#1915=CIRCLE('',#1914,6.5E0);
#1928=CIRCLE('',#1927,5.5E0);
#1933=CIRCLE('',#1932,5.5E0);
#1942=CIRCLE('',#1941,6.5E0);
#1947=CIRCLE('',#1946,6.5E0);
#2058=EDGE_CURVE('',#1974,#1975,#1734,.T.);
#2060=EDGE_CURVE('',#1975,#1977,#1739,.T.);
#2062=EDGE_CURVE('',#1977,#1978,#1747,.T.);
#2064=EDGE_CURVE('',#1978,#1979,#1754,.T.);
#2066=EDGE_CURVE('',#1981,#1979,#1834,.T.);
#2068=EDGE_CURVE('',#1981,#1982,#1761,.T.);
#2070=EDGE_CURVE('',#1982,#1983,#1769,.T.);
#2072=EDGE_CURVE('',#1974,#1983,#1782,.T.);
#2076=ADVANCED_FACE('',(#2075),#2057,.F.);
#2082=EDGE_CURVE('',#1974,#1985,#1773,.T.);
#2084=EDGE_CURVE('',#1987,#1985,#1928,.T.);
#2086=EDGE_CURVE('',#1989,#1987,#1901,.T.);
#2088=EDGE_CURVE('',#1975,#1989,#1777,.T.);
#2093=ADVANCED_FACE('',(#2092),#2081,.T.);
#2099=EDGE_CURVE('',#1975,#1974,#1817,.T.);
#2102=EDGE_CURVE('',#1991,#1989,#1896,.T.);
#2104=EDGE_CURVE('',#1985,#1991,#1933,.T.);
#2109=ADVANCED_FACE('',(#2108),#2098,.T.);
#2140=EDGE_CURVE('',#1983,#1992,#1790,.T.);
#2142=EDGE_CURVE('',#1992,#1993,#1797,.T.);
#2144=EDGE_CURVE('',#1995,#1993,#1851,.T.);
#2146=EDGE_CURVE('',#1995,#1996,#1804,.T.);
#2148=EDGE_CURVE('',#1996,#1977,#1812,.T.);
#2154=ADVANCED_FACE('',(#2153),#2138,.F.);
#2161=EDGE_CURVE('',#1982,#1998,#1821,.T.);
#2163=EDGE_CURVE('',#2000,#1998,#1875,.T.);
#2165=EDGE_CURVE('',#1992,#2000,#1842,.T.);
#2170=ADVANCED_FACE('',(#2169),#2159,.F.);
#2177=EDGE_CURVE('',#1979,#1981,#1829,.T.);
#2180=EDGE_CURVE('',#1978,#2002,#1825,.T.);
#2182=EDGE_CURVE('',#1998,#2002,#1879,.T.);
#2187=ADVANCED_FACE('',(#2186),#2175,.F.);
#2197=ADVANCED_FACE('',(#2196),#2192,.T.);
#2204=EDGE_CURVE('',#1996,#2004,#1838,.T.);
#2206=EDGE_CURVE('',#2002,#2004,#1883,.T.);
#2212=ADVANCED_FACE('',(#2211),#2202,.F.);
#2219=EDGE_CURVE('',#1993,#1995,#1846,.T.);
#2223=EDGE_CURVE('',#2004,#2000,#1887,.T.);
#2228=ADVANCED_FACE('',(#2227),#2217,.F.);
#2238=ADVANCED_FACE('',(#2237),#2233,.T.);
#2244=EDGE_CURVE('',#2007,#2008,#1856,.T.);
#2246=EDGE_CURVE('',#2010,#2008,#1923,.T.);
#2248=EDGE_CURVE('',#2010,#2012,#1861,.T.);
#2250=EDGE_CURVE('',#2012,#2014,#1866,.T.);
#2252=EDGE_CURVE('',#2016,#2014,#1955,.T.);
#2254=EDGE_CURVE('',#2016,#2007,#1871,.T.);
#2264=ADVANCED_FACE('',(#2257,#2263),#2243,.T.);
#2270=EDGE_CURVE('',#2019,#2020,#1910,.T.);
#2272=EDGE_CURVE('',#2019,#2008,#1891,.T.);
#2275=EDGE_CURVE('',#2020,#2007,#1959,.T.);
#2279=ADVANCED_FACE('',(#2278),#2269,.T.);
#2287=EDGE_CURVE('',#1987,#2019,#1905,.T.);
#2290=EDGE_CURVE('',#2020,#2022,#1915,.T.);
#2292=EDGE_CURVE('',#2022,#1991,#1919,.T.);
#2296=ADVANCED_FACE('',(#2295),#2284,.F.);
#2302=EDGE_CURVE('',#2024,#1987,#1951,.T.);
#2304=EDGE_CURVE('',#2010,#2024,#1967,.T.);
#2311=ADVANCED_FACE('',(#2310),#2301,.T.);
#2319=EDGE_CURVE('',#1991,#2026,#1937,.T.);
#2321=EDGE_CURVE('',#2026,#2028,#1942,.T.);
#2323=EDGE_CURVE('',#2028,#2024,#1947,.T.);
#2328=ADVANCED_FACE('',(#2327),#2316,.F.);
#2335=EDGE_CURVE('',#2016,#2022,#1963,.T.);
#2338=EDGE_CURVE('',#2026,#2014,#1971,.T.);
#2343=ADVANCED_FACE('',(#2342),#2333,.T.);
#2355=ADVANCED_FACE('',(#2354),#2348,.T.);
#2369=ADVANCED_FACE('',(#2368),#2360,.T.);
#2372=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2374=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2377=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2379=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2378))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2372,#2376,#2377))REPRESENTATION_CONTEXT(
'ID8','3'));
#2383=AXIS2_PLACEMENT_3D('',#2380,#2381,#2382);
#2384=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2383,#2371),#2379);
#2388=PRODUCT_DEFINITION('design','',#2387,#1708);
#2389=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PRT0004.',#2388);
#2390=SHAPE_DEFINITION_REPRESENTATION(#2389,#2384);
#2391=SHAPE_DEFINITION_REPRESENTATION(#2392,#2393);
#2392=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR ASM0002_ASM_ASM.',#2423);
#2393=SHAPE_REPRESENTATION('',(#2404,#2399,#2418),#2414);
#2394=NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','Next assembly relationship','PRT0004',
#2423,#2388,$);
#2395=PRODUCT_DEFINITION_SHAPE('Placement #7',
'Placement of PRT0004 with respect to ASM0002_ASM_ASM',#2394);
#2404=AXIS2_PLACEMENT_3D('',#2401,#2402,#2403);
#2407=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2409=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2412=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2414=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2413))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2407,#2411,#2412))REPRESENTATION_CONTEXT(
'ID9','3'));
#2418=AXIS2_PLACEMENT_3D('',#2415,#2416,#2417);
#2423=PRODUCT_DEFINITION('design','',#2422,#2419);
#2424=SHAPE_DEFINITION_REPRESENTATION(#2425,#2426);
#2425=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR ASM0001_ASM_ASM.',#2455);
#2426=SHAPE_REPRESENTATION('',(#2437,#2432,#2451),#2447);
#2427=NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','Next assembly relationship','ASM0002',
#2455,#2423,$);
#2428=PRODUCT_DEFINITION_SHAPE('Placement #8',
'Placement of ASM0002_ASM_ASM with respect to ASM0001_ASM_ASM',#2427);
#2437=AXIS2_PLACEMENT_3D('',#2434,#2435,#2436);
#2440=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2442=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2445=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2447=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2446))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2440,#2444,#2445))REPRESENTATION_CONTEXT(
'ID10','3'));
#2451=AXIS2_PLACEMENT_3D('',#2448,#2449,#2450);
#2455=PRODUCT_DEFINITION('design','',#2454,#2419);
#2456=NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','Next assembly relationship','ASM0001',
#2821,#2455,$);
#2457=PRODUCT_DEFINITION_SHAPE('Placement #9',
'Placement of ASM0001_ASM_ASM with respect to ASM0001_ASM',#2456);
#2466=AXIS2_PLACEMENT_3D('',#2463,#2464,#2465);
#2473=CIRCLE('',#2472,5.2E0);
#2478=CIRCLE('',#2477,5.2E0);
#2483=CIRCLE('',#2482,5.2E0);
#2496=CIRCLE('',#2495,5.2E0);
#2505=CIRCLE('',#2504,5.2E0);
#2514=CIRCLE('',#2513,5.2E0);
#2535=CIRCLE('',#2534,5.5E0);
#2540=CIRCLE('',#2539,5.5E0);
#2545=CIRCLE('',#2544,5.2E0);
#2550=CIRCLE('',#2549,5.2E0);
#2567=CIRCLE('',#2566,5.5E0);
#2572=CIRCLE('',#2571,5.5E0);
#2614=EDGE_CURVE('',#2579,#2580,#2473,.T.);
#2616=EDGE_CURVE('',#2580,#2579,#2478,.T.);
#2620=ADVANCED_FACE('',(#2619),#2613,.T.);
#2626=EDGE_CURVE('',#2591,#2592,#2483,.T.);
#2628=EDGE_CURVE('',#2594,#2591,#2487,.T.);
#2630=EDGE_CURVE('',#2597,#2594,#2550,.T.);
#2632=EDGE_CURVE('',#2597,#2598,#2491,.T.);
#2634=EDGE_CURVE('',#2600,#2598,#2496,.T.);
#2636=EDGE_CURVE('',#2600,#2580,#2500,.T.);
#2639=EDGE_CURVE('',#2592,#2579,#2509,.T.);
#2643=ADVANCED_FACE('',(#2642),#2625,.T.);
#2650=EDGE_CURVE('',#2592,#2602,#2505,.T.);
#2652=EDGE_CURVE('',#2602,#2591,#2576,.T.);
#2656=ADVANCED_FACE('',(#2655),#2648,.F.);
#2666=EDGE_CURVE('',#2608,#2600,#2514,.T.);
#2668=EDGE_CURVE('',#2607,#2608,#2518,.T.);
#2670=EDGE_CURVE('',#2604,#2607,#2545,.T.);
#2672=EDGE_CURVE('',#2604,#2602,#2522,.T.);
#2676=ADVANCED_FACE('',(#2675),#2661,.T.);
#2683=EDGE_CURVE('',#2608,#2598,#2526,.T.);
#2688=ADVANCED_FACE('',(#2687),#2681,.F.);
#2695=EDGE_CURVE('',#2607,#2597,#2530,.T.);
#2701=ADVANCED_FACE('',(#2700),#2693,.F.);
#2707=EDGE_CURVE('',#2583,#2584,#2535,.T.);
#2709=EDGE_CURVE('',#2584,#2583,#2540,.T.);
#2716=EDGE_CURVE('',#2604,#2594,#2554,.T.);
#2720=ADVANCED_FACE('',(#2712,#2719),#2706,.T.);
#2726=EDGE_CURVE('',#2586,#2583,#2562,.T.);
#2728=EDGE_CURVE('',#2588,#2586,#2567,.T.);
#2730=EDGE_CURVE('',#2588,#2584,#2558,.T.);
#2735=ADVANCED_FACE('',(#2734),#2725,.T.);
#2744=EDGE_CURVE('',#2586,#2588,#2572,.T.);
#2748=ADVANCED_FACE('',(#2747),#2740,.T.);
#2758=ADVANCED_FACE('',(#2757),#2753,.F.);
#2770=ADVANCED_FACE('',(#2769),#2763,.F.);
#2773=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2775=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2778=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2780=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2779))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2773,#2777,#2778))REPRESENTATION_CONTEXT(
'ID11','3'));
#2784=AXIS2_PLACEMENT_3D('',#2781,#2782,#2783);
#2785=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2784,#2772),#2780);
#2790=PRODUCT_DEFINITION('design','',#2789,#2786);
#2791=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR PRT0001.',#2790);
#2792=SHAPE_DEFINITION_REPRESENTATION(#2791,#2785);
#2793=NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','Next assembly relationship',
'PRT0001',#2821,#2790,$);
#2794=PRODUCT_DEFINITION_SHAPE('Placement #10',
'Placement of PRT0001 with respect to ASM0001_ASM',#2793);
#2803=AXIS2_PLACEMENT_3D('',#2800,#2801,#2802);
#2806=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2808=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2811=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2813=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2812))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2806,#2810,#2811))REPRESENTATION_CONTEXT(
'ID12','3'));
#2817=AXIS2_PLACEMENT_3D('',#2814,#2815,#2816);
#2821=PRODUCT_DEFINITION('design','',#2820,#2786);
#2822=SHAPE_DEFINITION_REPRESENTATION(#2823,#2824);
#2823=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 00000_ASM_ASM.',#2850);
#2824=SHAPE_REPRESENTATION('',(#2830,#2845),#2841);
#2825=NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','Next assembly relationship',
'ASM0001',#2850,#2821,$);
#2826=PRODUCT_DEFINITION_SHAPE('Placement #11',
'Placement of ASM0001_ASM with respect to 00000_ASM_ASM',#2825);
#2834=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2836=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2839=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2841=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2840))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2834,#2838,#2839))REPRESENTATION_CONTEXT(
'ID13','3'));
#2845=AXIS2_PLACEMENT_3D('',#2842,#2843,#2844);
#2850=PRODUCT_DEFINITION('design','',#2849,#2846);
ENDSEC;
END-ISO-10303-21;