/** * Copyright (c) 2017 - 2020, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef SDK_CONFIG_H #define SDK_CONFIG_H // <<< Use Configuration Wizard in Context Menu >>>\n #ifdef USE_APP_CONFIG #include "app_config.h" #endif // nRF_Drivers //========================================================== // NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module //========================================================== #ifndef NRFX_PRS_ENABLED #define NRFX_PRS_ENABLED 1 #endif // NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. #ifndef NRFX_PRS_BOX_0_ENABLED #define NRFX_PRS_BOX_0_ENABLED 0 #endif // NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. #ifndef NRFX_PRS_BOX_1_ENABLED #define NRFX_PRS_BOX_1_ENABLED 0 #endif // NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. #ifndef NRFX_PRS_BOX_2_ENABLED #define NRFX_PRS_BOX_2_ENABLED 0 #endif // NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module. #ifndef NRFX_PRS_BOX_3_ENABLED #define NRFX_PRS_BOX_3_ENABLED 0 #endif // NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module. #ifndef NRFX_PRS_BOX_4_ENABLED #define NRFX_PRS_BOX_4_ENABLED 1 #endif // NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRFX_PRS_CONFIG_LOG_ENABLED #define NRFX_PRS_CONFIG_LOG_ENABLED 0 #endif // NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRFX_PRS_CONFIG_LOG_LEVEL #define NRFX_PRS_CONFIG_LOG_LEVEL 3 #endif // NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_PRS_CONFIG_INFO_COLOR #define NRFX_PRS_CONFIG_INFO_COLOR 0 #endif // NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_PRS_CONFIG_DEBUG_COLOR #define NRFX_PRS_CONFIG_DEBUG_COLOR 0 #endif // // // NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver //========================================================== #ifndef NRFX_UARTE_ENABLED #define NRFX_UARTE_ENABLED 1 #endif // NRFX_UARTE0_ENABLED - Enable UARTE0 instance #ifndef NRFX_UARTE0_ENABLED #define NRFX_UARTE0_ENABLED 0 #endif // NRFX_UARTE1_ENABLED - Enable UARTE1 instance #ifndef NRFX_UARTE1_ENABLED #define NRFX_UARTE1_ENABLED 0 #endif // NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control // <0=> Disabled // <1=> Enabled #ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC #define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0 #endif // NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity // <0=> Excluded // <14=> Included #ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY #define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0 #endif // NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate // <323584=> 1200 baud // <643072=> 2400 baud // <1290240=> 4800 baud // <2576384=> 9600 baud // <3862528=> 14400 baud // <5152768=> 19200 baud // <7716864=> 28800 baud // <8388608=> 31250 baud // <10289152=> 38400 baud // <15007744=> 56000 baud // <15400960=> 57600 baud // <20615168=> 76800 baud // <30801920=> 115200 baud // <61865984=> 230400 baud // <67108864=> 250000 baud // <121634816=> 460800 baud // <251658240=> 921600 baud // <268435456=> 1000000 baud #ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE #define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920 #endif // NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority // <0=> 0 (highest) // <1=> 1 // <2=> 2 // <3=> 3 // <4=> 4 // <5=> 5 // <6=> 6 // <7=> 7 #ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY #define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 6 #endif // NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRFX_UARTE_CONFIG_LOG_ENABLED #define NRFX_UARTE_CONFIG_LOG_ENABLED 0 #endif // NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRFX_UARTE_CONFIG_LOG_LEVEL #define NRFX_UARTE_CONFIG_LOG_LEVEL 3 #endif // NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_UARTE_CONFIG_INFO_COLOR #define NRFX_UARTE_CONFIG_INFO_COLOR 0 #endif // NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR #define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 #endif // // // NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver //========================================================== #ifndef NRFX_UART_ENABLED #define NRFX_UART_ENABLED 1 #endif // NRFX_UART0_ENABLED - Enable UART0 instance #ifndef NRFX_UART0_ENABLED #define NRFX_UART0_ENABLED 0 #endif // NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control // <0=> Disabled // <1=> Enabled #ifndef NRFX_UART_DEFAULT_CONFIG_HWFC #define NRFX_UART_DEFAULT_CONFIG_HWFC 0 #endif // NRFX_UART_DEFAULT_CONFIG_PARITY - Parity // <0=> Excluded // <14=> Included #ifndef NRFX_UART_DEFAULT_CONFIG_PARITY #define NRFX_UART_DEFAULT_CONFIG_PARITY 0 #endif // NRFX_UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate // <323584=> 1200 baud // <643072=> 2400 baud // <1290240=> 4800 baud // <2576384=> 9600 baud // <3866624=> 14400 baud // <5152768=> 19200 baud // <7729152=> 28800 baud // <8388608=> 31250 baud // <10309632=> 38400 baud // <15007744=> 56000 baud // <15462400=> 57600 baud // <20615168=> 76800 baud // <30924800=> 115200 baud // <61845504=> 230400 baud // <67108864=> 250000 baud // <123695104=> 460800 baud // <247386112=> 921600 baud // <268435456=> 1000000 baud #ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE #define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800 #endif // NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority // <0=> 0 (highest) // <1=> 1 // <2=> 2 // <3=> 3 // <4=> 4 // <5=> 5 // <6=> 6 // <7=> 7 #ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY #define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 6 #endif // NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRFX_UART_CONFIG_LOG_ENABLED #define NRFX_UART_CONFIG_LOG_ENABLED 0 #endif // NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRFX_UART_CONFIG_LOG_LEVEL #define NRFX_UART_CONFIG_LOG_LEVEL 3 #endif // NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_UART_CONFIG_INFO_COLOR #define NRFX_UART_CONFIG_INFO_COLOR 0 #endif // NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_UART_CONFIG_DEBUG_COLOR #define NRFX_UART_CONFIG_DEBUG_COLOR 0 #endif // // // UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer //========================================================== #ifndef UART_ENABLED #define UART_ENABLED 1 #endif // UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control // <0=> Disabled // <1=> Enabled #ifndef UART_DEFAULT_CONFIG_HWFC #define UART_DEFAULT_CONFIG_HWFC 0 #endif // UART_DEFAULT_CONFIG_PARITY - Parity // <0=> Excluded // <14=> Included #ifndef UART_DEFAULT_CONFIG_PARITY #define UART_DEFAULT_CONFIG_PARITY 0 #endif // UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate // <323584=> 1200 baud // <643072=> 2400 baud // <1290240=> 4800 baud // <2576384=> 9600 baud // <3862528=> 14400 baud // <5152768=> 19200 baud // <7716864=> 28800 baud // <10289152=> 38400 baud // <15400960=> 57600 baud // <20615168=> 76800 baud // <30801920=> 115200 baud // <61865984=> 230400 baud // <67108864=> 250000 baud // <121634816=> 460800 baud // <251658240=> 921600 baud // <268435456=> 1000000 baud #ifndef UART_DEFAULT_CONFIG_BAUDRATE #define UART_DEFAULT_CONFIG_BAUDRATE 30801920 #endif // UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority // Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice // <0=> 0 (highest) // <1=> 1 // <2=> 2 // <3=> 3 // <4=> 4 // <5=> 5 // <6=> 6 // <7=> 7 #ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY #define UART_DEFAULT_CONFIG_IRQ_PRIORITY 6 #endif // UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA #ifndef UART_EASY_DMA_SUPPORT #define UART_EASY_DMA_SUPPORT 1 #endif // UART_LEGACY_SUPPORT - Driver supporting Legacy mode #ifndef UART_LEGACY_SUPPORT #define UART_LEGACY_SUPPORT 1 #endif // UART0_ENABLED - Enable UART0 instance //========================================================== #ifndef UART0_ENABLED #define UART0_ENABLED 1 #endif // UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA #ifndef UART0_CONFIG_USE_EASY_DMA #define UART0_CONFIG_USE_EASY_DMA 1 #endif // // UART1_ENABLED - Enable UART1 instance //========================================================== #ifndef UART1_ENABLED #define UART1_ENABLED 0 #endif // // // //========================================================== // nRF_Libraries //========================================================== // NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module //========================================================== #ifndef NRF_BALLOC_ENABLED #define NRF_BALLOC_ENABLED 1 #endif // NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. //========================================================== #ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED #define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 #endif // NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> #ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS #define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 #endif // NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> #ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS #define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 #endif // NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. #ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED #define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 #endif // NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. #ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED #define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 #endif // NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. #ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED #define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 #endif // NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module #ifndef NRF_BALLOC_CLI_CMDS #define NRF_BALLOC_CLI_CMDS 0 #endif // // // NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module #ifndef NRF_MEMOBJ_ENABLED #define NRF_MEMOBJ_ENABLED 1 #endif // NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. #ifndef NRF_STRERROR_ENABLED #define NRF_STRERROR_ENABLED 1 #endif // nrf_fprintf - fprintf function. //========================================================== // NRF_FPRINTF_ENABLED - Enable/disable fprintf module. #ifndef NRF_FPRINTF_ENABLED #define NRF_FPRINTF_ENABLED 1 #endif // NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED - For each printed LF, function will add CR. #ifndef NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED #define NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 1 #endif // NRF_FPRINTF_DOUBLE_ENABLED - Enable IEEE-754 double precision formatting. #ifndef NRF_FPRINTF_DOUBLE_ENABLED #define NRF_FPRINTF_DOUBLE_ENABLED 0 #endif // //========================================================== // //========================================================== // nRF_Log //========================================================== // NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend //========================================================== #ifndef NRF_LOG_BACKEND_RTT_ENABLED #define NRF_LOG_BACKEND_RTT_ENABLED 0 #endif // NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. // Size of the buffer is a trade-off between RAM usage and processing. // if buffer is smaller then strings will often be fragmented. // It is recommended to use size which will fit typical log and only the // longer one will be fragmented. #ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE #define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 #endif // NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT #ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS #define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 #endif // NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. // If RTT fails to accept any new data after retries // module assumes that host is not active and on next // request it will perform only one write attempt. // On successful writing, module assumes that host is active // and scheme with retry is applied again. #ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT #define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 #endif // // NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend //========================================================== #ifndef NRF_LOG_BACKEND_UART_ENABLED #define NRF_LOG_BACKEND_UART_ENABLED 0 #endif // NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin #ifndef NRF_LOG_BACKEND_UART_TX_PIN #define NRF_LOG_BACKEND_UART_TX_PIN 6 #endif // NRF_LOG_BACKEND_UART_BAUDRATE - Default Baudrate // <323584=> 1200 baud // <643072=> 2400 baud // <1290240=> 4800 baud // <2576384=> 9600 baud // <3862528=> 14400 baud // <5152768=> 19200 baud // <7716864=> 28800 baud // <10289152=> 38400 baud // <15400960=> 57600 baud // <20615168=> 76800 baud // <30801920=> 115200 baud // <61865984=> 230400 baud // <67108864=> 250000 baud // <121634816=> 460800 baud // <251658240=> 921600 baud // <268435456=> 1000000 baud #ifndef NRF_LOG_BACKEND_UART_BAUDRATE #define NRF_LOG_BACKEND_UART_BAUDRATE 30801920 #endif // NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. // Size of the buffer is a trade-off between RAM usage and processing. // if buffer is smaller then strings will often be fragmented. // It is recommended to use size which will fit typical log and only the // longer one will be fragmented. #ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE #define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64 #endif // // NRF_LOG_ENABLED - nrf_log - Logger //========================================================== #ifndef NRF_LOG_ENABLED #define NRF_LOG_ENABLED 0 #endif // Log message pool - Configuration of log message pool //========================================================== // NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. // If a small value is set, then performance of logs processing // is degraded because data is fragmented. Bigger value impacts // RAM memory utilization. The size is set to fit a message with // a timestamp and up to 2 arguments in a single memory object. #ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE #define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 #endif // NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects // If a small value is set, then it may lead to a deadlock // in certain cases if backend has high latency and holds // multiple messages for long time. Bigger value impacts // RAM memory usage. #ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT #define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 #endif // //========================================================== // NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. // If set then oldest logs are overwritten. Otherwise a // marker is injected informing about overflow. #ifndef NRF_LOG_ALLOW_OVERFLOW #define NRF_LOG_ALLOW_OVERFLOW 1 #endif // NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). // Must be power of 2 and multiple of 4. // If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. // <128=> 128 // <256=> 256 // <512=> 512 // <1024=> 1024 // <2048=> 2048 // <4096=> 4096 // <8192=> 8192 // <16384=> 16384 #ifndef NRF_LOG_BUFSIZE #define NRF_LOG_BUFSIZE 1024 #endif // NRF_LOG_CLI_CMDS - Enable CLI commands for the module. #ifndef NRF_LOG_CLI_CMDS #define NRF_LOG_CLI_CMDS 0 #endif // NRF_LOG_DEFAULT_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_LOG_DEFAULT_LEVEL #define NRF_LOG_DEFAULT_LEVEL 3 #endif // NRF_LOG_DEFERRED - Enable deffered logger. // Log data is buffered and can be processed in idle. #ifndef NRF_LOG_DEFERRED #define NRF_LOG_DEFERRED 1 #endif // NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. #ifndef NRF_LOG_FILTERS_ENABLED #define NRF_LOG_FILTERS_ENABLED 0 #endif // NRF_LOG_NON_DEFFERED_CRITICAL_REGION_ENABLED - Enable use of critical region for non deffered mode when flushing logs. // When enabled NRF_LOG_FLUSH is called from critical section when non deffered mode is used. // Log output will never be corrupted as access to the log backend is exclusive // but system will spend significant amount of time in critical section #ifndef NRF_LOG_NON_DEFFERED_CRITICAL_REGION_ENABLED #define NRF_LOG_NON_DEFFERED_CRITICAL_REGION_ENABLED 0 #endif // NRF_LOG_STR_PUSH_BUFFER_SIZE - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH. // <16=> 16 // <32=> 32 // <64=> 64 // <128=> 128 // <256=> 256 // <512=> 512 // <1024=> 1024 #ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE #define NRF_LOG_STR_PUSH_BUFFER_SIZE 128 #endif // NRF_LOG_STR_PUSH_BUFFER_SIZE - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH. // <16=> 16 // <32=> 32 // <64=> 64 // <128=> 128 // <256=> 256 // <512=> 512 // <1024=> 1024 #ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE #define NRF_LOG_STR_PUSH_BUFFER_SIZE 128 #endif // NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string //========================================================== #ifndef NRF_LOG_USES_COLORS #define NRF_LOG_USES_COLORS 0 #endif // NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LOG_COLOR_DEFAULT #define NRF_LOG_COLOR_DEFAULT 0 #endif // NRF_LOG_ERROR_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LOG_ERROR_COLOR #define NRF_LOG_ERROR_COLOR 2 #endif // NRF_LOG_WARNING_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LOG_WARNING_COLOR #define NRF_LOG_WARNING_COLOR 4 #endif // // NRF_LOG_USES_TIMESTAMP - Enable timestamping // Function for getting the timestamp is provided by the user //========================================================== #ifndef NRF_LOG_USES_TIMESTAMP #define NRF_LOG_USES_TIMESTAMP 0 #endif // NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) or 0 to use app_timer frequency. #ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY #define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 0 #endif // // nrf_log module configuration //========================================================== // nrf_log in nRF_Core //========================================================== // NRF_MPU_LIB_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_MPU_LIB_CONFIG_LOG_ENABLED #define NRF_MPU_LIB_CONFIG_LOG_ENABLED 0 #endif // NRF_MPU_LIB_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_MPU_LIB_CONFIG_LOG_LEVEL #define NRF_MPU_LIB_CONFIG_LOG_LEVEL 3 #endif // NRF_MPU_LIB_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MPU_LIB_CONFIG_INFO_COLOR #define NRF_MPU_LIB_CONFIG_INFO_COLOR 0 #endif // NRF_MPU_LIB_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MPU_LIB_CONFIG_DEBUG_COLOR #define NRF_MPU_LIB_CONFIG_DEBUG_COLOR 0 #endif // // NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED #define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 #endif // NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL #define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 #endif // NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR #define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 #endif // NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR #define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 #endif // // TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TASK_MANAGER_CONFIG_LOG_ENABLED #define TASK_MANAGER_CONFIG_LOG_ENABLED 0 #endif // TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TASK_MANAGER_CONFIG_LOG_LEVEL #define TASK_MANAGER_CONFIG_LOG_LEVEL 3 #endif // TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TASK_MANAGER_CONFIG_INFO_COLOR #define TASK_MANAGER_CONFIG_INFO_COLOR 0 #endif // TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR #define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 #endif // // //========================================================== // nrf_log in nRF_Drivers //========================================================== // CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef CLOCK_CONFIG_LOG_ENABLED #define CLOCK_CONFIG_LOG_ENABLED 0 #endif // CLOCK_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef CLOCK_CONFIG_LOG_LEVEL #define CLOCK_CONFIG_LOG_LEVEL 3 #endif // CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef CLOCK_CONFIG_INFO_COLOR #define CLOCK_CONFIG_INFO_COLOR 0 #endif // CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef CLOCK_CONFIG_DEBUG_COLOR #define CLOCK_CONFIG_DEBUG_COLOR 0 #endif // // COMP_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef COMP_CONFIG_LOG_ENABLED #define COMP_CONFIG_LOG_ENABLED 0 #endif // COMP_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef COMP_CONFIG_LOG_LEVEL #define COMP_CONFIG_LOG_LEVEL 3 #endif // COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef COMP_CONFIG_INFO_COLOR #define COMP_CONFIG_INFO_COLOR 0 #endif // COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef COMP_CONFIG_DEBUG_COLOR #define COMP_CONFIG_DEBUG_COLOR 0 #endif // // GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef GPIOTE_CONFIG_LOG_ENABLED #define GPIOTE_CONFIG_LOG_ENABLED 0 #endif // GPIOTE_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef GPIOTE_CONFIG_LOG_LEVEL #define GPIOTE_CONFIG_LOG_LEVEL 3 #endif // GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef GPIOTE_CONFIG_INFO_COLOR #define GPIOTE_CONFIG_INFO_COLOR 0 #endif // GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef GPIOTE_CONFIG_DEBUG_COLOR #define GPIOTE_CONFIG_DEBUG_COLOR 0 #endif // // LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef LPCOMP_CONFIG_LOG_ENABLED #define LPCOMP_CONFIG_LOG_ENABLED 0 #endif // LPCOMP_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef LPCOMP_CONFIG_LOG_LEVEL #define LPCOMP_CONFIG_LOG_LEVEL 3 #endif // LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef LPCOMP_CONFIG_INFO_COLOR #define LPCOMP_CONFIG_INFO_COLOR 0 #endif // LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef LPCOMP_CONFIG_DEBUG_COLOR #define LPCOMP_CONFIG_DEBUG_COLOR 0 #endif // // MAX3421E_HOST_CONFIG_LOG_ENABLED - Enable logging in the module //========================================================== #ifndef MAX3421E_HOST_CONFIG_LOG_ENABLED #define MAX3421E_HOST_CONFIG_LOG_ENABLED 0 #endif // MAX3421E_HOST_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef MAX3421E_HOST_CONFIG_LOG_LEVEL #define MAX3421E_HOST_CONFIG_LOG_LEVEL 3 #endif // MAX3421E_HOST_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef MAX3421E_HOST_CONFIG_INFO_COLOR #define MAX3421E_HOST_CONFIG_INFO_COLOR 0 #endif // MAX3421E_HOST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef MAX3421E_HOST_CONFIG_DEBUG_COLOR #define MAX3421E_HOST_CONFIG_DEBUG_COLOR 0 #endif // // NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module //========================================================== #ifndef NRFX_USBD_CONFIG_LOG_ENABLED #define NRFX_USBD_CONFIG_LOG_ENABLED 0 #endif // NRFX_USBD_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRFX_USBD_CONFIG_LOG_LEVEL #define NRFX_USBD_CONFIG_LOG_LEVEL 3 #endif // NRFX_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_USBD_CONFIG_INFO_COLOR #define NRFX_USBD_CONFIG_INFO_COLOR 0 #endif // NRFX_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRFX_USBD_CONFIG_DEBUG_COLOR #define NRFX_USBD_CONFIG_DEBUG_COLOR 0 #endif // // PDM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef PDM_CONFIG_LOG_ENABLED #define PDM_CONFIG_LOG_ENABLED 0 #endif // PDM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PDM_CONFIG_LOG_LEVEL #define PDM_CONFIG_LOG_LEVEL 3 #endif // PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PDM_CONFIG_INFO_COLOR #define PDM_CONFIG_INFO_COLOR 0 #endif // PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PDM_CONFIG_DEBUG_COLOR #define PDM_CONFIG_DEBUG_COLOR 0 #endif // // PPI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef PPI_CONFIG_LOG_ENABLED #define PPI_CONFIG_LOG_ENABLED 0 #endif // PPI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PPI_CONFIG_LOG_LEVEL #define PPI_CONFIG_LOG_LEVEL 3 #endif // PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PPI_CONFIG_INFO_COLOR #define PPI_CONFIG_INFO_COLOR 0 #endif // PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PPI_CONFIG_DEBUG_COLOR #define PPI_CONFIG_DEBUG_COLOR 0 #endif // // PWM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef PWM_CONFIG_LOG_ENABLED #define PWM_CONFIG_LOG_ENABLED 0 #endif // PWM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PWM_CONFIG_LOG_LEVEL #define PWM_CONFIG_LOG_LEVEL 3 #endif // PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PWM_CONFIG_INFO_COLOR #define PWM_CONFIG_INFO_COLOR 0 #endif // PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PWM_CONFIG_DEBUG_COLOR #define PWM_CONFIG_DEBUG_COLOR 0 #endif // // QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef QDEC_CONFIG_LOG_ENABLED #define QDEC_CONFIG_LOG_ENABLED 0 #endif // QDEC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef QDEC_CONFIG_LOG_LEVEL #define QDEC_CONFIG_LOG_LEVEL 3 #endif // QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef QDEC_CONFIG_INFO_COLOR #define QDEC_CONFIG_INFO_COLOR 0 #endif // QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef QDEC_CONFIG_DEBUG_COLOR #define QDEC_CONFIG_DEBUG_COLOR 0 #endif // // RNG_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef RNG_CONFIG_LOG_ENABLED #define RNG_CONFIG_LOG_ENABLED 0 #endif // RNG_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef RNG_CONFIG_LOG_LEVEL #define RNG_CONFIG_LOG_LEVEL 3 #endif // RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RNG_CONFIG_INFO_COLOR #define RNG_CONFIG_INFO_COLOR 0 #endif // RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RNG_CONFIG_DEBUG_COLOR #define RNG_CONFIG_DEBUG_COLOR 0 #endif // RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. #ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED #define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 #endif // // RTC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef RTC_CONFIG_LOG_ENABLED #define RTC_CONFIG_LOG_ENABLED 0 #endif // RTC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef RTC_CONFIG_LOG_LEVEL #define RTC_CONFIG_LOG_LEVEL 3 #endif // RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RTC_CONFIG_INFO_COLOR #define RTC_CONFIG_INFO_COLOR 0 #endif // RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef RTC_CONFIG_DEBUG_COLOR #define RTC_CONFIG_DEBUG_COLOR 0 #endif // // SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SAADC_CONFIG_LOG_ENABLED #define SAADC_CONFIG_LOG_ENABLED 0 #endif // SAADC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SAADC_CONFIG_LOG_LEVEL #define SAADC_CONFIG_LOG_LEVEL 3 #endif // SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SAADC_CONFIG_INFO_COLOR #define SAADC_CONFIG_INFO_COLOR 0 #endif // SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SAADC_CONFIG_DEBUG_COLOR #define SAADC_CONFIG_DEBUG_COLOR 0 #endif // // SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SPIS_CONFIG_LOG_ENABLED #define SPIS_CONFIG_LOG_ENABLED 0 #endif // SPIS_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SPIS_CONFIG_LOG_LEVEL #define SPIS_CONFIG_LOG_LEVEL 3 #endif // SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPIS_CONFIG_INFO_COLOR #define SPIS_CONFIG_INFO_COLOR 0 #endif // SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPIS_CONFIG_DEBUG_COLOR #define SPIS_CONFIG_DEBUG_COLOR 0 #endif // // SPI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SPI_CONFIG_LOG_ENABLED #define SPI_CONFIG_LOG_ENABLED 0 #endif // SPI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SPI_CONFIG_LOG_LEVEL #define SPI_CONFIG_LOG_LEVEL 3 #endif // SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPI_CONFIG_INFO_COLOR #define SPI_CONFIG_INFO_COLOR 0 #endif // SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SPI_CONFIG_DEBUG_COLOR #define SPI_CONFIG_DEBUG_COLOR 0 #endif // // TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TIMER_CONFIG_LOG_ENABLED #define TIMER_CONFIG_LOG_ENABLED 0 #endif // TIMER_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TIMER_CONFIG_LOG_LEVEL #define TIMER_CONFIG_LOG_LEVEL 3 #endif // TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TIMER_CONFIG_INFO_COLOR #define TIMER_CONFIG_INFO_COLOR 0 #endif // TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TIMER_CONFIG_DEBUG_COLOR #define TIMER_CONFIG_DEBUG_COLOR 0 #endif // // TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TWIS_CONFIG_LOG_ENABLED #define TWIS_CONFIG_LOG_ENABLED 0 #endif // TWIS_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TWIS_CONFIG_LOG_LEVEL #define TWIS_CONFIG_LOG_LEVEL 3 #endif // TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWIS_CONFIG_INFO_COLOR #define TWIS_CONFIG_INFO_COLOR 0 #endif // TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWIS_CONFIG_DEBUG_COLOR #define TWIS_CONFIG_DEBUG_COLOR 0 #endif // // TWI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef TWI_CONFIG_LOG_ENABLED #define TWI_CONFIG_LOG_ENABLED 0 #endif // TWI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef TWI_CONFIG_LOG_LEVEL #define TWI_CONFIG_LOG_LEVEL 3 #endif // TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWI_CONFIG_INFO_COLOR #define TWI_CONFIG_INFO_COLOR 0 #endif // TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef TWI_CONFIG_DEBUG_COLOR #define TWI_CONFIG_DEBUG_COLOR 0 #endif // // UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef UART_CONFIG_LOG_ENABLED #define UART_CONFIG_LOG_ENABLED 0 #endif // UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef UART_CONFIG_LOG_LEVEL #define UART_CONFIG_LOG_LEVEL 3 #endif // UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef UART_CONFIG_INFO_COLOR #define UART_CONFIG_INFO_COLOR 0 #endif // UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef UART_CONFIG_DEBUG_COLOR #define UART_CONFIG_DEBUG_COLOR 0 #endif // // USBD_CONFIG_LOG_ENABLED - Enable logging in the module //========================================================== #ifndef USBD_CONFIG_LOG_ENABLED #define USBD_CONFIG_LOG_ENABLED 0 #endif // USBD_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef USBD_CONFIG_LOG_LEVEL #define USBD_CONFIG_LOG_LEVEL 3 #endif // USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef USBD_CONFIG_INFO_COLOR #define USBD_CONFIG_INFO_COLOR 0 #endif // USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef USBD_CONFIG_DEBUG_COLOR #define USBD_CONFIG_DEBUG_COLOR 0 #endif // // WDT_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef WDT_CONFIG_LOG_ENABLED #define WDT_CONFIG_LOG_ENABLED 0 #endif // WDT_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef WDT_CONFIG_LOG_LEVEL #define WDT_CONFIG_LOG_LEVEL 3 #endif // WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef WDT_CONFIG_INFO_COLOR #define WDT_CONFIG_INFO_COLOR 0 #endif // WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef WDT_CONFIG_DEBUG_COLOR #define WDT_CONFIG_DEBUG_COLOR 0 #endif // // //========================================================== // nrf_log in nRF_Libraries //========================================================== // APP_BUTTON_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_BUTTON_CONFIG_LOG_ENABLED #define APP_BUTTON_CONFIG_LOG_ENABLED 0 #endif // APP_BUTTON_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_BUTTON_CONFIG_LOG_LEVEL #define APP_BUTTON_CONFIG_LOG_LEVEL 3 #endif // APP_BUTTON_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. // If module generates a lot of logs, initial log level can // be decreased to prevent flooding. Severity level can be // increased on instance basis. // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_BUTTON_CONFIG_INITIAL_LOG_LEVEL #define APP_BUTTON_CONFIG_INITIAL_LOG_LEVEL 3 #endif // APP_BUTTON_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_BUTTON_CONFIG_INFO_COLOR #define APP_BUTTON_CONFIG_INFO_COLOR 0 #endif // APP_BUTTON_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_BUTTON_CONFIG_DEBUG_COLOR #define APP_BUTTON_CONFIG_DEBUG_COLOR 0 #endif // // APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_TIMER_CONFIG_LOG_ENABLED #define APP_TIMER_CONFIG_LOG_ENABLED 0 #endif // APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_TIMER_CONFIG_LOG_LEVEL #define APP_TIMER_CONFIG_LOG_LEVEL 3 #endif // APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. // If module generates a lot of logs, initial log level can // be decreased to prevent flooding. Severity level can be // increased on instance basis. // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL #define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 #endif // APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_TIMER_CONFIG_INFO_COLOR #define APP_TIMER_CONFIG_INFO_COLOR 0 #endif // APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_TIMER_CONFIG_DEBUG_COLOR #define APP_TIMER_CONFIG_DEBUG_COLOR 0 #endif // // APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED #define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL #define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR #define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 #endif // APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR #define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 #endif // // APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module. //========================================================== #ifndef APP_USBD_CONFIG_LOG_ENABLED #define APP_USBD_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_CONFIG_LOG_LEVEL #define APP_USBD_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_CONFIG_INFO_COLOR #define APP_USBD_CONFIG_INFO_COLOR 0 #endif // APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_CONFIG_DEBUG_COLOR #define APP_USBD_CONFIG_DEBUG_COLOR 0 #endif // // APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED #define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL #define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR #define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 #endif // APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR #define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 #endif // // APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED #define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL #define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_MSC_CONFIG_INFO_COLOR #define APP_USBD_MSC_CONFIG_INFO_COLOR 0 #endif // APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR #define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 #endif // // APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED #define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 #endif // APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL #define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 #endif // APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR #define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 #endif // APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR #define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 #endif // // NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED #define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 #endif // NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL #define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 #endif // NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL #define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 #endif // NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_ATFIFO_CONFIG_INFO_COLOR #define NRF_ATFIFO_CONFIG_INFO_COLOR 0 #endif // NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR #define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 #endif // // NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_BALLOC_CONFIG_LOG_ENABLED #define NRF_BALLOC_CONFIG_LOG_ENABLED 0 #endif // NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BALLOC_CONFIG_LOG_LEVEL #define NRF_BALLOC_CONFIG_LOG_LEVEL 3 #endif // NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. // If module generates a lot of logs, initial log level can // be decreased to prevent flooding. Severity level can be // increased on instance basis. // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL #define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 #endif // NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BALLOC_CONFIG_INFO_COLOR #define NRF_BALLOC_CONFIG_INFO_COLOR 0 #endif // NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR #define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 #endif // // NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED #define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED 0 #endif // NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL #define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL 3 #endif // NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL #define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL 3 #endif // NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR #define NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR 0 #endif // NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR #define NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR 0 #endif // // NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED #define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED 0 #endif // NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL #define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL 3 #endif // NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL #define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL 3 #endif // NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR #define NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR 0 #endif // NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR #define NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR 0 #endif // // NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED #define NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED 0 #endif // NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL #define NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL 3 #endif // NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL #define NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL 3 #endif // NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR #define NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR 0 #endif // NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR #define NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR 0 #endif // // NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED #define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL #define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR #define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR #define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 #endif // // NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED #define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL #define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR #define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR #define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 #endif // // NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED #define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 #endif // NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL #define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 #endif // NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_UART_CONFIG_INFO_COLOR #define NRF_CLI_UART_CONFIG_INFO_COLOR 0 #endif // NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR #define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 #endif // // NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED #define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 #endif // NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL #define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 #endif // NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR #define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 #endif // NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR #define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 #endif // // NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED #define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 #endif // NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL #define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 #endif // NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR #define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 #endif // NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR #define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 #endif // // NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED #define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 #endif // NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL #define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 #endif // NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR #define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 #endif // NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR #define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 #endif // // NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_QUEUE_CONFIG_LOG_ENABLED #define NRF_QUEUE_CONFIG_LOG_ENABLED 0 #endif // NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_QUEUE_CONFIG_LOG_LEVEL #define NRF_QUEUE_CONFIG_LOG_LEVEL 3 #endif // NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL #define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 #endif // NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_QUEUE_CONFIG_INFO_COLOR #define NRF_QUEUE_CONFIG_INFO_COLOR 0 #endif // NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR #define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 #endif // // NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. //========================================================== #ifndef NRF_SDH_ANT_LOG_ENABLED #define NRF_SDH_ANT_LOG_ENABLED 0 #endif // NRF_SDH_ANT_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_ANT_LOG_LEVEL #define NRF_SDH_ANT_LOG_LEVEL 3 #endif // NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_ANT_INFO_COLOR #define NRF_SDH_ANT_INFO_COLOR 0 #endif // NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_ANT_DEBUG_COLOR #define NRF_SDH_ANT_DEBUG_COLOR 0 #endif // // NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. //========================================================== #ifndef NRF_SDH_BLE_LOG_ENABLED #define NRF_SDH_BLE_LOG_ENABLED 0 #endif // NRF_SDH_BLE_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_BLE_LOG_LEVEL #define NRF_SDH_BLE_LOG_LEVEL 3 #endif // NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_BLE_INFO_COLOR #define NRF_SDH_BLE_INFO_COLOR 0 #endif // NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_BLE_DEBUG_COLOR #define NRF_SDH_BLE_DEBUG_COLOR 0 #endif // // NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. //========================================================== #ifndef NRF_SDH_LOG_ENABLED #define NRF_SDH_LOG_ENABLED 0 #endif // NRF_SDH_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_LOG_LEVEL #define NRF_SDH_LOG_LEVEL 3 #endif // NRF_SDH_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_INFO_COLOR #define NRF_SDH_INFO_COLOR 0 #endif // NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_DEBUG_COLOR #define NRF_SDH_DEBUG_COLOR 0 #endif // // NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. //========================================================== #ifndef NRF_SDH_SOC_LOG_ENABLED #define NRF_SDH_SOC_LOG_ENABLED 0 #endif // NRF_SDH_SOC_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SDH_SOC_LOG_LEVEL #define NRF_SDH_SOC_LOG_LEVEL 3 #endif // NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_SOC_INFO_COLOR #define NRF_SDH_SOC_INFO_COLOR 0 #endif // NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SDH_SOC_DEBUG_COLOR #define NRF_SDH_SOC_DEBUG_COLOR 0 #endif // // NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED #define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 #endif // NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL #define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 #endif // NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SORTLIST_CONFIG_INFO_COLOR #define NRF_SORTLIST_CONFIG_INFO_COLOR 0 #endif // NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR #define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 #endif // // NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED #define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 #endif // NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL #define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 #endif // NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR #define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 #endif // NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR #define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 #endif // // PM_LOG_ENABLED - Enable logging in Peer Manager and its submodules. //========================================================== #ifndef PM_LOG_ENABLED #define PM_LOG_ENABLED 1 #endif // PM_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef PM_LOG_LEVEL #define PM_LOG_LEVEL 3 #endif // PM_LOG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PM_LOG_INFO_COLOR #define PM_LOG_INFO_COLOR 0 #endif // PM_LOG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef PM_LOG_DEBUG_COLOR #define PM_LOG_DEBUG_COLOR 0 #endif // // //========================================================== // nrf_log in nRF_Serialization //========================================================== // SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. //========================================================== #ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED #define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 #endif // SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level // <0=> Off // <1=> Error // <2=> Warning // <3=> Info // <4=> Debug #ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL #define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 #endif // SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR #define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 #endif // SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. // <0=> Default // <1=> Black // <2=> Red // <3=> Green // <4=> Yellow // <5=> Blue // <6=> Magenta // <7=> Cyan // <8=> White #ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR #define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 #endif // // //========================================================== // //========================================================== // // NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter #ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED #define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 #endif // //========================================================== // nRF_Segger_RTT //========================================================== // segger_rtt - SEGGER RTT //========================================================== // SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. // Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE // or this value is actually used. It depends on which one is bigger. #ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP #define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 #endif // SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Maximum number of upstream buffers. #ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS #define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 #endif // SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of downstream buffer. #ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN #define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 #endif // SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Maximum number of downstream buffers. #ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS #define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 #endif // SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. // The following modes are supported: // - SKIP - Do not block, output nothing. // - TRIM - Do not block, output as much as fits. // - BLOCK - Wait until there is space in the buffer. // <0=> SKIP // <1=> TRIM // <2=> BLOCK_IF_FIFO_FULL #ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE #define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 #endif // //========================================================== // //========================================================== // <<< end of configuration section >>> #endif //SDK_CONFIG_H