shoe_mcu/hal/hal_ble_client.h

#ifndef __hal_ble_client__
#define __hal_ble_client__
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include "sdk_common.h"
#include "SEGGER_RTT.h"
#include "usr_config.h"

#ifdef __cplusplus  
extern "C" {  
#endif  

	
#ifdef __cplusplus
} 
#endif

/*************** 发送命令 ********************/
typedef enum {
	BLE_Client_T_HEART = 0,
	BLE_Client_T_MOTION,			      //动作
	BLE_Client_T_TRACK = 0x04,		  //轨迹
	BLE_Client_T_CONNET_LED = 0x10,	//连接灯通知
	BLE_Client_T_CONFIG,			      //配对
	BLE_Client_T_UPDATE = 0xA1,		  //数据更新
	BLE_Client_T_GAMEMODE,			    //游戏模式
	BLE_Client_T_CONNET_R,			    //右鞋连接通知
	BLE_Client_T_SHOCK,				      //震动
	BLE_Client_T_REALTIMESTEP,		  //实时步数
	BLE_Client_T_DFU,				        //空中升级
	BLE_Client_T_CHARGE,			      //充电通知
	BLE_CLient_T_CHAR_VOL,          //共享充电电量
	BLE_CLient_T_SET_ORGAN,         //激光的开关
	BLE_Client_T_ERR,				        //错误信息
	
//	BLE_Client_NUM_OF_T,	//命令连续用此值
}BLE_Client_T_n;	
//#define BLE_Client_NUM_OF_T 9  //注意：：：此值根据命令的数量改变

/*************** 发送子命令 ********************/
enum { //BLE_Client_T_UPDATE
	BLE_Client_T_UPDATE_BASEINFO = 0,	//设备基本信息
	BLE_Client_T_UPDATE_DATA ,			//设备数据
	BLE_Client_T_UPDATE_STEPNUM ,		//回复存储步数
	BLE_Client_T_UPDATE_STEPNUM_CLERA,	//删除存储步数
};

enum { //BLE_Client_T_CHARGE
	BLE_Client_T_CHARGE_NONE = 0,
	BLE_Client_T_CHARGE_PULLOUT,
	BLE_Client_T_CHARGE_INSERT,
	BLE_Client_T_CHARGE_DONE,
};

//#define BLE_Client_NUM_OF_T 20  //注意：：：此值根据命令的数量改变(包括子命令)

/*************** 接收命令 ********************/
typedef enum {
	BLE_Client_R_HEART = 0,
	BLE_Client_R_MOTION,			    //动作
	BLE_Client_R_TRACK = 0x04,		//轨迹
	BLE_Client_R_CONNET_LED = 0x10,	//连接灯通知
	BLE_Client_R_CONFIG,			  //配对
	BLE_Client_R_UPDATE = 0xA1,	//数据更新
	BLE_Client_R_GAMEMODE,			//游戏模式
	BLE_Client_R_CONNET_R,			//右鞋连接通知
	BLE_Client_R_SHOCK,				  //震动
	BLE_Client_R_REALTIMESTEP,  //实时步数
	BLE_Client_R_DFU,				    //空中升级
	BLE_Client_R_CHARGE,			  //充电通知
	BLE_CLient_R_CHAR_VOL,      //共享充电电量
  BLE_CLient_R_SET_ORGAN,     //激光的开关
	BLE_Client_R_ERR,				    //错误信息
//	BLE_Client_NUM_OF_R,	    //命令连续用此值
}BLE_Client_R_n;	
#define BLE_Client_NUM_OF_R 15  //注意：：：此值根据命令的数量改变


/*************** 接收子命令 ********************/
enum { //BLE_Client_R_UPDATE
	BLE_Client_R_UPDATE_BASEINFO = 0,
	BLE_Client_R_UPDATE_DATA ,
	BLE_Client_R_UPDATE_STEPNUM,
	BLE_Client_R_UPDATE_STEPNUM_CLERA,
};

enum { //BLE_Client_R_REALTIMESTEP
	BLE_Client_R_REALTIMESTEP_EXIT = 0, //实时计步退出
	BLE_Client_R_REALTIMESTEP_ENTER,    //实时计步进入
  BLE_Client_R_REALTIMESTEP_HANDUP,   //实时计步挂起
};



typedef void (*BLE_Client_Callback)(void*);

typedef struct _BLE_Client_Rx{
	uint8_t  cmd;
	uint8_t*  pDat;
	uint8_t  datLen;
	BLE_Client_Callback cb;
}BLE_Client_Rx_t;

typedef struct _BLE_Client_Tx{
	uint8_t  n;
	uint32_t t;
	uint8_t  ncnt;
	uint32_t tcnt;
	uint8_t  cmd;
	uint8_t* pDat;
	uint8_t  datLen;
	uint8_t  holdon;
	BLE_Client_Callback cb;
	struct _BLE_Client_Tx *next;	//单向链表
}BLE_Client_Tx_t;

void BLE_Client_Initialize(void);
void BLE_Client_Send(unsigned char cmd,unsigned char *pDat,unsigned char datLen);
int BLE_Client_Rx_Regist(unsigned char cmd,BLE_Client_Callback cb);
void BLE_Client_Tx_Send(BLE_Client_Tx_t* handle,unsigned char cmd,unsigned char *pDat,unsigned char datLen);
void BLE_Client_Tx_Clear(BLE_Client_Tx_t* handle);
void BLE_Client_Push(unsigned char* p,int len);

#endif