#include "system.h"
#include "app_client_dataupdate.h"
#include "hal_ble_client.h"
#include "hal_flash.h"
#include "bsp_time.h"
#include "system.h"
#include "app_host.h"
#include "app_step.h"
#include "hal_battery.h"
#include "hal_imu.h"

void app_client_DataUpdate_Send(void)
{
	//>> 1(设备数据)
	//<< 1(子命令): 左鞋电量(1)+左鞋温度(1)+左鞋压力(4)+左鞋步数(4)+右鞋电量(1)+右鞋温度(1)+右鞋压力(4)+右鞋步数(4)
	uint8_t buf[32];
	uint8_t L=0;
	int32_t temperature;
//	uint32_t press = 0; 	
	
	sd_temp_get(&temperature);
	temperature = temperature>>2; 
//	press = IMU_GetPressRAW(); //获取压力
	
//	SEGGER_RTT_printf(0,"temperature=%d\n",temperature);
//	SEGGER_RTT_printf(0,"press=%d\n",press);
	
	//子命令
	buf[L++] = BLE_Client_T_UPDATE_DATA;
	//左鞋
	buf[L++] = GetBatteryPersent();
	buf[L++] = (uint8_t)temperature;
//	buf[L++] = (uint8_t)(press>>24);
//	buf[L++] = (uint8_t)(press>>16);
//	buf[L++] = (uint8_t)(press>>8);
//	buf[L++] = (uint8_t)(press>>0);
  buf[L++] = 0;
	buf[L++] = 0;
	buf[L++] = 0;
	buf[L++] = 0;
	
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[0]>>24);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[0]>>16);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[0]>>8);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[0]>>0);
	//右鞋
	buf[L++] = app_host_GetVol_R();
	buf[L++] = app_host_GetTemp_R();
	buf[L++] = (uint8_t)(app_host_GetPress_R()>>24);
	buf[L++] = (uint8_t)(app_host_GetPress_R()>>16);
	buf[L++] = (uint8_t)(app_host_GetPress_R()>>8);
	buf[L++] = (uint8_t)(app_host_GetPress_R()>>0);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[1]>>24);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[1]>>16);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[1]>>8);
	buf[L++] = (uint8_t)(mFlash.mStep.stepCur[1]>>0);
	
	BLE_Client_Tx_Send(0,BLE_Client_T_UPDATE,buf,L);
}