#include "hal_led.h"
#include "bsp_gpio.h"
#include "nrf_gpio.h"
#include "usr_config.h"
#include "bsp_time.h"
#include "system.h"
#include "hal_ble_client.h"
#include "bsp_pwm.h"
#include "nrf_delay.h"

#define LED_ENABLE						1
#define LED_DISABLE						0

#define LED_DEFAULT_NUMBER		4

#define ONE_LED_LIGHT_TIME		(3*4*8*4*0.125)		//us

//高位先发，按照GRB的顺序发送数据
//50us以上reset
//#define WS_L								0,0x8000,0x8000,0x8000
//#define WS_H								0,0,0,0x8000

static uint32_t led_channel[4] 																= {PIN_LED_CONTROL,NRF_DRV_PWM_PIN_NOT_USED,NRF_DRV_PWM_PIN_NOT_USED,NRF_DRV_PWM_PIN_NOT_USED};
static uint16_t led_pwm_cycle_time  													= 3;		//1 -> 0.125us
static uint32_t led_pwm_mode																	=	PWM_FLAG_STOP;
static pwm_values_common_t led_color_seq_values[3][4*8]				= {0};
static nrf_pwm_sequence_t *led_color_seq 											= NULL;
static const uint16_t WS_H[4] 																= {0,0,0,0x8000};
static const uint16_t WS_L[4] 																= {0,0x8000,0x8000,0x8000};


struct WS_t{
	uint8_t  onoff; 
	uint32_t color;		//颜色
};
static struct WS_t m_wsled[MEMBER_NUM_OF_LED]									=	{0};

/**
	@brief 设置灯的时序
	@param color - [in] 灯的颜色
	@return 无
*/
static void WS2812_DisplayDot(uint32_t col)
{
	uint32_t col_r = (col & 0x00FF0000) >> 16;
	uint32_t col_g = (col & 0x0000FF00) >> 8;
	uint32_t col_b = col & 0x000000FF;
	
	uint32_t t = 0x80;
	uint32_t index = 0;
	for(int i=0;i<8;i++)
	{
		index = i*4;
		if(col_g & t){
			led_color_seq_values[0][index+0] = WS_H[0];
			led_color_seq_values[0][index+1] = WS_H[1];
			led_color_seq_values[0][index+2] = WS_H[2];
			led_color_seq_values[0][index+3] = WS_H[3];
		}else{
			led_color_seq_values[0][index+0] = WS_L[0];
			led_color_seq_values[0][index+1] = WS_L[1];
			led_color_seq_values[0][index+2] = WS_L[2];
			led_color_seq_values[0][index+3] = WS_L[3];
		}
		index = i*4;
		if(col_r & t){
			led_color_seq_values[1][index+0] = WS_H[0];
			led_color_seq_values[1][index+1] = WS_H[1];
			led_color_seq_values[1][index+2] = WS_H[2];
			led_color_seq_values[1][index+3] = WS_H[3];
		}else{
			led_color_seq_values[1][index+0] = WS_L[0];
			led_color_seq_values[1][index+1] = WS_L[1];
			led_color_seq_values[1][index+2] = WS_L[2];
			led_color_seq_values[1][index+3] = WS_L[3];
		}
		index = i*4;
		if(col_b & t){
			led_color_seq_values[2][index+0] = WS_H[0];
			led_color_seq_values[2][index+1] = WS_H[1];
			led_color_seq_values[2][index+2] = WS_H[2];
			led_color_seq_values[2][index+3] = WS_H[3];
		}else{
			led_color_seq_values[2][index+0] = WS_L[0];
			led_color_seq_values[2][index+1] = WS_L[1];
			led_color_seq_values[2][index+2] = WS_L[2];
			led_color_seq_values[2][index+3] = WS_L[3];
		}
		t = t>>1;
	}		

}

/**
	@brief	设置灯的数量
	@param	color - [in] 颜色
	@param	led_num - [in] 灯的数量
	@return 无
*/
static void SetLedColor(uint32_t color, uint32_t led_num)
{
	if(color == COLOR_BLACK && led_num == LED_DEFAULT_NUMBER)	//关闭所有灯
	{
		nrf_gpio_pin_write(PIN_LED_ENABLE,LED_DISABLE);nrf_delay_ms(1);
//		nrf_gpio_pin_write(PIN_LED_ENABLE,LED_ENABLE);nrf_delay_ms(1);
	}else{
		nrf_gpio_pin_write(PIN_LED_ENABLE,LED_ENABLE);nrf_delay_ms(1);
		WS2812_DisplayDot(color);
		SetSimplePwmPlayBack(led_color_seq, led_num, led_pwm_mode);
	}
}

//强制关闭LED
void LED_Close_Enforce(void){
	 nrf_gpio_pin_write(PIN_LED_ENABLE,LED_DISABLE);nrf_delay_ms(1);  
}

void LED_Start(uint8_t n)
{
	if(n>=MEMBER_NUM_OF_LED) return;
	if(m_wsled[n].onoff!=1) m_wsled[n].onoff = 1;
}

void LED_Stop(uint8_t n)
{
	if(n>=MEMBER_NUM_OF_LED) return;
	if(m_wsled[n].onoff!=0) {
		m_wsled[n].onoff = 0;
	}
}

void LED_SetColor(uint8_t n,uint32_t color)
{ 
	if(n>=MEMBER_NUM_OF_LED) return;
	m_wsled[n].color = color;
// DEBUG_LOG("LED_SetColor:%02x\n",color);
}

void LED_Process(void)
{
	for(int i=MEMBER_NUM_OF_LED-1;i>0;i--){
		if(m_wsled[i].onoff>0){
			SetLedColor(m_wsled[i].color, LED_DEFAULT_NUMBER);
//			DEBUG_LOG("i:%d LED_SetColor:%02x\n",i,m_wsled[i].color);
			return;
		}
	}
	nrf_gpio_pin_write(PIN_LED_ENABLE,LED_DISABLE);
}

void LED_Run(void) 
{
	#if DEBUG_LEDRGB
	static uint32_t temp=0;
		if(temp==0){
			LED_SetColor(LED_RUN,COLOR_RED);
		}else if(temp==1){
			LED_SetColor(LED_RUN,COLOR_GREEN);
		}else if(temp==2){
			LED_SetColor(LED_RUN,COLOR_BLUE);
//		}else if(temp==3){
//			LED_SetColor(LED_RUN,COLOR_ORANGE);
//		}else if(temp==4){
//			LED_SetColor(LED_RUN,COLOR_YELLOW);
//		}else if(temp==5){
//			LED_SetColor(LED_RUN,COLOR_PURPLE);
		}
		if(++temp>=3) temp = 0;
//		DEBUG_LOG("LED_Run,%d\n",temp);;
	#else
	static uint32_t  flag = 1;
		if(flag){
			nrf_gpio_pin_write(PIN_LED_RUN,LED_SMALL_ENABLE);
			flag = 0;
		}else{
			nrf_gpio_pin_write(PIN_LED_RUN,LED_SMALL_DISABLE);
			flag = 1;
		}
	#endif
}


void LED_Run_Init(void)
{
	LED_Start(LED_RUN);
	#if DEBUG_LEDRGB
	Process_Start(500,"LED_Run",LED_Run);
	#else
	Process_Start(20,"LED_Run",LED_Run);
	#endif
	Process_SetHoldOn(LED_Run,1);
}

void cb_LED_Wakeup(uint32_t t)
{
	Pwm_Initialize();
}

void cb_LED_Sleep(uint32_t t)
{
	SetLedColor(COLOR_BLACK, LED_DEFAULT_NUMBER);
	Pwm_UnInitialize();
}

void LED_Init(void)
{	
	SetPwm_BaseClock(NRF_PWM_CLK_8MHz);
	SetPwm_Channels(led_channel[0], led_channel[1], led_channel[2], led_channel[3]);
	SetPwm_DutyCycleThreshold(led_pwm_cycle_time);
	Pwm_Initialize();
	
	led_color_seq = Pwm_SetComSequence(led_color_seq_values[0], PWM_SEQUENCE_VALUES_LEN(led_color_seq_values),0,0);
	
	LED_Start(LED_NONE);
	nrf_gpio_cfg_output(PIN_LED_ENABLE); 	nrf_gpio_pin_write(PIN_LED_ENABLE,LED_ENABLE);
	nrf_gpio_cfg_output(PIN_LED_RUN); 	nrf_gpio_pin_write(PIN_LED_RUN,LED_SMALL_DISABLE);
	Process_Start(10,"LED_Process",LED_Process);
	#if DEBUG_LEDRUN
	LED_Run_Init();
	#endif
	
	Sleep_Regist(cb_LED_Sleep);
	Wakeup_Regist(cb_LED_Wakeup);
}